urmet domus MT101-013 Technical Manual

Brand: urmet domus

Model: MT101-013

Type: Technical Manual

The urmet domus MT101-013 is a digital 1-wire audio kit designed for hands-free door communication and access control. It features a compact size and a simple 2-wire connection, making it easy to install and use. With its built-in microphone and speaker, you can communicate with visitors clearly and conveniently. Additionally, the MT101-013 includes an electric lock release function, allowing you to remotely open your door or gate with the press of a button.

BASIC SYSTEM DIAGRAMS

sec.6

−−−−

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC SYSTEM DIAGRAMS

SECTION 6

(REV.B)

Download from:

www.urmetdomus.com

Technical Manuals area

Basic diagrams for connecting a panel to door phones

and video door phones in electronic call systems are

illustrated in this section.

Other diagrams are collected in section where useful

advices for choosing the right system and warnings for

installers are provided.

The complete collection of technical diagrams (including

those in this section) may be found at the

www.urmetdomus.com web site in the CLUB IN area

“Electrical Diagrams”.

The index is on the page 12.

BASIC SYSTEM DIAGRAMS

−−−−

sec.6

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC SYSTEM DIAGRAMS

DIAGRAM NOTES

0,8

circuit

Distance

0,5

- The indicated distance is between

door unit and most distant door phone.

- Lay the wires at a suitable distance

from power lines (as far away as

possible).

0,5

call circuit

0,5 1

1,6

200 300100

0,8

sq.mm

Door opening

C4.001 - MINIMUM WIRE

CROSS-SECTION AREAS

Voice and

sq.mm

C4.018 – door unit only K-steel –

connect terminals ~0 and ~12 for name

tag lights

C4.004 - Use auxiliary relay

Ref.788/21 or Ref.788/52 for operating

the lock in systems with long lines

to avoid buzzing.

C4.007 - Sinthesi models only:

See instruction booklet provided with

product for connecting terminals G/T,

~0 and ~12 between modules.

C4.008 - K-Steel models only:

all connections are made with

terminal boards.

The connection variant is:

S3S1

~12

LOCK

DOOR PHONE

Ref.788/52

Door Lock

DEVICE

FROM 9 OF

ELECTRIC

12~

POWER SUPPLY

Release

DOOR PHONES

RELAY

C4.006 - Sinthesi models only:

- Connected jumper ... to ...

0,75

Cross-section

area sq.mm

0,35

Distance m 100

20050

C1.002 - MINIMUM WIRE

CROSS-SECTION AREAS

CU.009 - Provide two wires for

switching on the push-button panel

light bulbs.

Use a power transformer suitable to

the number of light bulbs.

Use of transformer Ref. 9000/230 is

recommended for up to five bulbs

(max 15 W).

If not present in the diagram, provide

two wires for lighting the push-button

panel name tags.

Use a separate transformer of a

suitable power rating.

Transformer Ref.9000/230 is recommended

for up to 15W.

The system power unit is sufficient for

up to 6W.

If not present in the diagram, provide

two wires for lighting the push-button

panel name tags.

Use a separate transformer of a

suitable power rating.

Transformer Ref.9000/230 is recommended

for up to 15W.

The system power unit is sufficient for

up to 6W.

BASIC SYSTEM DIAGRAMS

sec.6

−−−−

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC SYSTEM DIAGRAMS

DIAGRAM NOTES

VD.002 - See the chapter "Demister

power" in the chosen product manual

for K-Steel camera modules only.

Maximum

distance

0,50

0,35

2,5

Double

0,75

0,5 1,0

1,5

A,B

200

0,35

2,0

Wires

R1 Sq.mm

0,35

0,75

10050

V5.001 - Wire cross-section area

The diagrams indicate the distance

between the camera and most distant

video door phone unit.

Normal wires can be used for

distances up to 100 metres. For

higher distances (up to 200 metres)

the wires A and B must be doubled.

Sq.mm

wires

VX.018 - Connect the following

jumpers on the device:

a) ..... with .....

b) ..... with .....

c) ..... with .....

VX.003 - MINIMUM WIRE

CROSS-SECTION AREAS

Provide two wires for switching on

the push-button panel light bulbs.

Use a separate transformer suitable

to the number of light bulbs.

(Transformer ref. 9000/230 is

recommended for up to 5 bulbs).

The system power unit is sufficient

for up to 2 bulbs.

VX.006 - See the instruction book

provided with the product for fitting

the accessory in the device.

VX.008 -

VX.010 - No more than 20 monitors

should be connected to each column;

add video distributors to the

camera output or other device if

there are more devices.

VX.014 - Dusk switch or similar device

for switching lights on, where

relevant.

VX.011 - Close the coaxial wire on

the last monitor in the riser with

a 75 Ohm resistance between

terminals V4 and V5.

Distance

Normal

COAXIAL

CABLE

75 Ohm

Sq.mm

50 100 200 300

0,5 0,8 1 1,6

0,8 1 1,6 2,5

Use a normal coaxial wire

for distances up to 300 m

Add a video amplifier for

longer distances.

Wires

R1,R2,+TC

Wires

Sq.mm

Connect the devices to a

filter and power line protection

device.

IN OUT

Ref.1332/85

Ref.1332/86

IN OUT

FilterProtection

Neutral

Mains ~

Line ~

Earth

Phase

Utility

VU.002 - Follow the instructions

provided with the product for

fitting the camera.

0,50,5 1

200 300100

0,8

VX.034 - MINIMUM WIRE CROSS-SECTION AREAS

Distance m

mmq

Normal

wires

0,50,5 10,8mmq

Wires

R1, R2, +TC

COAXIAL

CABLE

75 Ohm

Call and

button

common

wires

0,8 10,5 1,6mmq

Use a normal coaxial cable

for distances up to 300m

Add a video amplifier for

longer distances.

If not present in the diagram, provide

two wires for lighting the push-button

panel name tags.

Use a separate transformer of a

suitable power rating.

Transformer Ref.9000/230 is recommended

for up to 15W.

The system power unit is sufficient for

up to 6W.

BASIC SYSTEM DIAGRAMS

−−−−

sec.6

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR 4+N WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of several door phones to 1 door unit

FUNCTION

Pressing one of the external panel buttons, the bitonal electronic

call is sent to the correspondent door phone loudspeaker. When the

called door phone handset is unhooked, contact is established and

conversation may take place. To operate the electric lock it is sufﬁ cient

to press the proper push button.

DEVICES

The following devices are needed for the system illustrated in diagram

SC101-1133C:

DOOR PHONE REFERENCES

N. X Door phones Mod. Atlantico White Ref. 1133

N. X Door phones Mod. Scaitel White Ref. 1132

Black Ref. 1132/40

N. X Door phones Mod. Utopia Ref. 1134/1

POWER SUPPLY FOR DOOR PHONE SYSTEM REFERENCES

N. 1 Power supply for door phone system Ref. 786/11

OUTDOOR STATION REFERENCES

Sinthesi model

N. Y Button modules Ref. 1145/11-/12-/13-/14

N. 1 Module with door unit set-up Ref. 1145/20-/21-/22

N. 1 Ampliﬁ ed door unit Ref. 1145/500

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Sinthesi” for respective

diagrams and installation methods.

K-Steel model

N. Y Button modules Ref. 1155/11-/12A-/13A-/14A

N. 1 Module with door unit Ref. 1155/20-/21-/22A

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “K-Steel modular vandal-proof panel”

for respective diagrams and installation methods.

725 model

N. 1 Panel with N buttons Mod. 725

N. 1 Ampliﬁ ed door unit Ref. 5150/500

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels with anodized Aluminium

front plate Mod. 725” for respective diagrams and installation

methods.

Domus Aura model

N. 1 Panel with N buttons Mod. 1110

N. 1 Ampliﬁ ed door unit Ref. 5150/500

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Domus Aura” for respective

diagrams and installation methods.

DIAGRAM NOTES

(see beginning section)

C4.001 C4.004

C4.006

Sinthesi models only:

Connect jumper L with G/T

C4.007 C4.008

BASIC SYSTEM DIAGRAMS

sec.6

−−−−

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR 4+N WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of several door phones to 1 door unit

(C4.004)

(C4.007)

(C4.008)

(C4.006)

G/T

~12

~12U2

G/T

-J

-6

~12

G/T ~12

~12

G/T

TO THE FOLLOWING

DOOR PHONES

POWER SUPPLY

FOR DOOR

PHONE SYSTEM

Lock Release

MAIN ~

TO THE FOLLOWING

MODULE

ELECTRIC LOCK

Name tag

lighting

SC101-1133C

BASIC SYSTEM DIAGRAMS

−−−−

sec.6

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR 1+1 WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of door phones to 1 outdoor station with secrecy of conversation

FUNCTION

URMET DOMUS 1+1 wire system allows to obtain the service of a

standard outdoor set installation with conversation, call, electric lock

opening, with only 2 wires in the rising column: 1 common + 1 single

for each door phone. The outdoor set is fed, with two wires only, by a

12Vac voltage transformer.

To assure call secrecy on all the door phones of the system, speciﬁ c

secrecy circuits (one for each button) are ﬁ tted inside the push button

panel. In this way, all the door phones are normally disabled for

conversation (no conversation is heard when the hand-set is lifted);

only the door phone called from the outside can start the conversation

with the caller, certain that no other user can barge in and intercept the

call.

The door phone called remains enabled for conversation until a

subsequent call to another appliance is made from the push button

panel.

Release of the electric lock is also enabled by the secrecy circuit

which means that a user cannot open the lock unless he/she has been

called.

DEVICES

The following devices are needed for the system illustrated in diagram

SC101-1135F:

DOOR PHONE REFERENCES

N. X Door phones Mod. Atlantico Ref. 1133/35A

N. X Door phones Mod. Scaitel Ref. 1132/35

N. X Door phones Mod. Utopia Ref. 1134/35

POWER SUPPLY FOR DOOR PHONE SYSTEM REFERENCES

N. 1 Transformer Ref. 9000/230

OUTDOOR STATION REFERENCES

Sinthesi model

N. X Button modules Ref. 1145/11-/12-/13-/14

N. 1 Module with door unit set-up Ref. 1145/20-/21

N. 1 Ampliﬁ ed door unit Ref. 1145/67

N. X/4 Conversation privacy device Ref. 1145/74

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Sinthesi” for respective

diagrams and installation methods.

K-Steel model

N. Y Button modules Ref. 1155/11-/12A-/13A-/14A

N. 1 Module with door unit Ref. 1155/30-/31-/32A

N. X/4 Conversation privacy device Ref. 1145/74

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “K-Steel modular vandal-proof panel”

for respective diagrams and installation methods.

DIAGRAM NOTES

(see beginning section)

C1.002

C4.006

Sinthesi models only:

Ponticellare C1 con U1

C4.007

C4.008

VX.006

VX.014

BASIC SYSTEM DIAGRAMS

sec.6

−−−−

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR 1+1 WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of door phones to 1 outdoor station with secrecy of conversation

SC101-1135F

(VX.014)

(C4.008)

(C4.007)

(VX.006)

(C4.006)

G/T

1/~

G/T

~12

CA1

~12

G/T

~12

1 4

COLUMN

DOOR PHONES

BUTTON MODULE

TO THE FOLLOWING

MODULE

TO THE FOLLOWING

CONVERSATION

PRIVACY

DEVICE

CONVERSATION

PRIVACY

DEVICE

DOOR UNIT

Lock Release

ELECTRIC LOCK

Name tag

lighting

Name tag

lighting

TRANSFORMER

MAIN ~

LIGHT BULB

TRANSFORMER

BASIC SYSTEM DIAGRAMS

−−−−

sec.6

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR COAX ELECTRONIC VIDEO DOOR PHONE SYSTEMS

Connection of video door phones to 1 video outdoor station

6+(n-2)+coax

6+n+coax

9+n+coax

6+(n-1)+coax

7+coax

FUNCTION

This system allows connection between the video outdoor station

and the various monitors situated in the apartments. When the visitor

presses a button on the push button panel, the bitonal electronic call

is sent to the corresponding monitor loudspeaker and, after about 8

seconds, the image appears on the screen.

At this point the user sees the visitor and can answer, if he wishes,

unhooking the handset.

At the end of the conversation, the electric lock can be operated by

pressing the key ( ).

Vision of the image lasts about 60 seconds, after which the intervention

of the built-in timer in the power supply causes it to go off. If a second

monitor is called before the end of the 60 seconds, the ﬁ rst monitor will

automatically go off and the latter comes on. This feature guarantees

secrecy of vision.

DEVICES

The following devices are needed for the system illustrated in diagram

SV102-2631E:

VIDEO DOOR PHONE REFERENCES

Atlantico model

N. X Video door phone Ref. 1702/1

N. X Bracket Ref.1202/90

Artico model

N. X Video door phone Ref. 1705/1

N. X Bracket Ref. 1705/90

VIDEO OUTDOOR STATION DIAGRAMS

Sinthesi model

N. 1 Camera modules with built-in door unit Ref. 1745/80-/81-/82

N. X Button modules Ref. 1145/11-/12-/13-/14

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Sinthesi” for respective

diagrams and installation methods.

K-Steel model

N. 1 Camera modules with built-in door unit Ref. 1755/80

N. X Button modules Ref. 1155/11-/12A-/13A-/14A

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “K-Steel modular vandal-proof panel”

for respective diagrams and installation methods.

725 model

N. 1 Panel with N buttons Mod. 725

N. 1 Ampliﬁ ed door unit Ref. 5150/500

N. 1 Camera Ref. 725/600

N. 1 Front plate Ref. 725/601-/602

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels with anodized Aluminium

front plate Mod. 725” for respective diagrams and installation

methods.

Domus Aura model

N. 1 Panel with N buttons Mod. 1110

N. 1 Ampliﬁ ed door unit Ref. 5150/500

N. 1 Camera Ref. 1810/70

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Domus Aura” for respective

diagrams and installation methods.

POWER SUPPLY

N. 1 Video power supply Ref. 789/5B

N. 1 Video distributor Ref. 1794/4A

N. 1 Transformer Ref. 9000/230

DIAGRAM NOTES

(see beginning section)

C4.006

Sinthesi models only:

Connect jumper L with G/T

C4.007 C4.008

VD.002

VX.003 VX.008

VX.010 VX.011 VX.014

BASIC SYSTEM DIAGRAMS

sec.6

−−−−

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR COAX ELECTRONIC VIDEO DOOR PHONE SYSTEMS

Connection of video door phones to 1 video outdoor station

SV102-2631E

(VX.008)

(C4.006)

(VX.014)

(VX.010)

(VX.011)

(VD.002)

(C4.007)

(C4.008)

~12

+TC

-6

SE1

~12

SE2

+TC

~12

G/T

~12

G/T

~12

G/T

LINE~

TRANSFORMER

Name tag

lighting

TO THE FOLLOWING

MODULE

Name tag

lighting

VIDEO

DISTRIBUTOR

LINE ~

ELECTRIC LOCK

Lock Release

VIDEO

POWER SUPPLY

BASIC SYSTEM DIAGRAMS

−−−−

sec.6

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

FUNCTION

The 5-wire video door phone system implements conversation privacy,

call and door opener functions in normal door phone systems with only

5 wires in the riser column: 4 common + 1 single for each device.

The door unit is powered with only two wires and a transformer at

12V~.

The most interesting application of a 5-wire system is in old building

where a door phone system is already ﬁ tted. The existing service can

be transformed into a video door phone system without adding wires

to the column or in the apartments.

Speciﬁ c conversation privacy circuits must be ﬁ tted in the panel for

ensuring conversation privacy for all video door phones in the system

(one for each button).

All video door phones are normally deactivated (no sound is heard

when the handset is picked up); only the video door phone called from

the door can start the conversation. No other users can cut into the

call.

The voice circuit of the called video door phone remains activate until

the following call is made from the panel to another device.

The door opening function is connected to conversation privacy; this

means that a user must be called to be able to open the electrical

lock.

DEVICES

The following devices are needed for the system illustrated in diagram

SV102-2633H:

VIDEO DOOR PHONE REFERENCES

Atlantico model (A)

N. X Video door phone Ref. 1702/1

N. X Bracket Ref. 1202/955

Artico model (A)

N. X Video door phone Ref. 1705/1

N. X Bracket Ref. 1705/955

Scaitel model (B)

N. X Video module Ref. 1732/1

N. X Bracket Ref. 1732/955

N. X Door phone Ref. 1132/35

BASIC DIAGRAMS FOR 5-WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of a video door phone riser to a video outdoor station

with secrecy device

VIDEO OUTDOOR STATION DIAGRAMS

Sinthesi model

N. X Button modules Ref. 1145/11-/12-/13-/14

N. 1 Camera modules with built in door unit Ref. 1745/20-/21-/22

N. X Conversation privacy device Ref. 1145/74

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Sinthesi” for respective

diagrams and installation methods.

K-Steel model

N. X Button modules Ref. 1155/11-/12A-/13A-/14A

N. 1 Camera modules Ref. 1755/30

N. 1 Door unit module Ref. 1155/30-/31-/32A

N. X Conversation privacy device Ref. 1145/74

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “K-Steel modular vandal-proof panel”

for respective diagrams and installation methods.

725 model

N. 1 Panel with N buttons (min. 4) Mod. 725

N. 1 Ampliﬁ ed door unit Ref. 1035/67

N. 1 Camera Ref. 725/600

N. 1 Video adapter Ref. 1742/13A

N. 1 Frontal plate Ref. 725/601 or /602

N. X Conversation privacy device Ref. 1035/25

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels with anodized Aluminium

front plate Mod. 725” for respective diagrams and installation

methods.

Domus Aura model

N. 1 Panel with N buttons (min. 3) Mod. 1710

N. 1 Ampliﬁ ed door unit Ref. 1035/67

N. 1 Camera Ref. 1810/70

N. 1 Video adapter Ref. 1742/13A

N. X Conversation privacy device Ref. 1110/74

The panels must be installed in ﬂ ush-mounting boxes with

module holder frames or in cases with hood for wall-mounted

versions. Refer to section “Panels Domus Aura” for respective

diagrams and installation methods.

MISCELLANEOUS

N. 1 Video power supply Ref. 789/5B

N. X Video distributor Ref. 955/40

DIAGRAM NOTES

(see beginning section)

C4.007 C4.008 C4.018 V5.001 VD.002

VX.006 VX.008 VX.014

VX.018

Connect the following jumpers on the device:

a) R1 to 1 b) CA to 2

CONNECT 2 82Ohm

RESISTORS-1/4W

VIDEO

DISTRIBUTOR

VIDEO

DISTRIBUTOR

BASIC SYSTEM DIAGRAMS

sec.6

−−−−

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

BASIC DIAGRAMS FOR 5-WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of a video door phone riser to a video outdoor station

with secrecy device

SV102-2633H

(VX.014)

(CU.009)

(C4.007)

(C4.008)

(VX.008)

Ref.789/5B

(VX.018)

Mod. K-Steel/SinthesiMod.725/Domus-Aura

(VU.002)

(VX.006)

"B"

"A"

"A""A"

"A"

C4.018)

+TC

G/T

~12

G/T

~12

+TC

1/~

~12

+TC

1/~

K-Steel Sinthe si

PSPS

G/T

CA1

(VD.002)

CA1

~12

4 41 1

1/~

P. E.

IIIII

R1R2

LINE

-6

1/~

SE2

~12

+TC

SE1

IIIII

R1R2

2 x 82Ω1/4W

VIDEO

DISTRIBUTOR

Ref.955/40

Output

Input

VIDEO DOOR PHONES

DOOR PHONE

VIDEO MODULE

VIDEO

DISTRIBUTOR

Ref.955/40

Output

Input

VIDEO DOOR PHONES

DOOR PHONE

VIDEO MODULE

TO THE FOLLOWING

VIDEO DISTRIBUTOR

TO THE FOLLOWING

MODULE

BUTTON MODULE

TO THE FOLLOWING

CONVERSATION

PRIVACY DEVICE

VIDEO

POWER SUPPLY

Lock Release

Lock

Release

Name tag

lighting

Name tag

lighting

Name tag

lighting

ELECTRIC LOCK

LINE ~

TRANSFORMER

To The

Following

Privacy

Device

TV-camera

Adapter

sec.6

−−−−

SECTION 6 CONTENTS

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM - PRODUCT TECHNICAL MANUAL

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM - PRODUCT TECHNICAL MANUAL - Section 6

DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual

Diagrams Section Pag.

BASIC SYSTEM DIAGRAMS

DIAGRAM NOTES .................................................................................................................................................................................6 ................2

BASIC DIAGRAMS FOR 4+N WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of several door phones to 1 door unit......................................................................................... SC101-1133C .................6 ................4

BASIC DIAGRAMS FOR 1+1 WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of door phones to 1 outdoor station with secrecy of conversation ............................................. SC101-1135F .................6 ................6

BASIC DIAGRAMS FOR COAX ELECTRONIC VIDEO DOOR PHONE SYSTEMS

Connection of video door phones to 1 video outdoor station ........................................................................ SV102-2631E .................6 ................8

BASIC DIAGRAMS FOR 5-WIRE ELECTRONIC DOOR PHONE SYSTEMS

Connection of a video door phone riser to a video outdoor station with secrecy device ............................... SV102-2633H .................6 ............. 10