2. Oxford Garden
  3. Travira 63″ Travira Table

Oxford Garden Travira 63″ Travira Table Assembly Instructions

  • I have reviewed the assembly instructions for the Oxford Garden Travira 63" Table. This document includes information about the table's components, hardware, and step-by-step assembly instructions. I am ready to help with your questions about assembling the table.
  • What components are included with the table?
    What hardware is needed for assembly?
    What is the purpose of the aluminum umbrella hole reducer?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
63” TRAVIRA TABLE
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
NOTE
Table top may vary from illustrations but the assembly is the same for all Travira 63” tables.
Table Top Assembly
Quantity: 1
Corner Posts
Quantity: 4
Parasol Hole Cap
Quantity: 1
3
Aluminum Umbrella
Hole Reducer - optional
Quantity: 1
4
Flat Washer
Quantity: 8
A
Lock Washers
Quantity: 8
B
Bolts
Quantity: 8
C
Allen Wrench
Quantity: 1
D
Ver. 06.30.20
STEP 2
Using the provided wrench, secure corner post to the
table top using a metal lock washer, washer and
bolt . Repeat step 2 for the remaining 3 corner posts.
INSTRUCTIONS
STEP 1
On a flat surface, lay table top upside down.
Ver. 2020.02.10
STEP 2 (detail) STEP 3
Carefully turn the assembled dinning table in an upright
position.
STEP 4 (Optional)
If you have a smaller umbrella pole - use the provided
Aluminum Umbrella Hole Reducer to secure umbrella.
4
4
B
C
A
A
B
C
A
B
CA
B
C
/