2. Oxford Garden
  3. Travira 72” Rectangular Bar Table

Oxford Garden Travira 72” Rectangular Bar Table Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the OXFORD GARDEN TRAVIRA 72" Rectangular Bar Table. The document includes a component list and step-by-step directions for assembling the table using tools and parts such as a hex wrench, Allen wrench, various bolts and washers. I am ready to answer your questions.
  • What tools are needed for assembly?
    What size bolts are used to attach the leg assemblies to the tabletop?
    What size bolts are used to attach the V-brace to the stretcher?
    What size bolts are used to secure the stretcher to leg assemblies?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
TRAVIRA 72” RECTANGULAR BAR TABLE
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
Tabletop Assembly
Quantity: 1
Leg Assembly
Quantity: 2
Stretcher
Quantity: 1
V-Brace
Quantity: 1
Large Washer
Quantity: 8
30mm Bolt
Quantity: 8
Small Washer
Quantity: 12
21mm Bolt
Quantity: 12
64mm Bolt
Quantity: 2
Hex Wrench
Quantity: 1
Allen Wrench
Quantity: 1
Ver. 06.30.20
STEP 2
Using the provided hex wrench secure leg
assemblies to the tabletop using the large
washers and the 30mm bolts . Repeat step 2
for remaining leg assembly.
STEP 3
Using the provided Allen wrench secure stretcher
to leg assemblies using the small washers and
the 21mm bolts .
Ver. 2018.12.12
INSTRUCTIONS
STEP 1
On a clean, flat surface, lay tabletop upside down
STEP 2 (detail)
STEP 3 (detail) STEP 4
Using the provided Allen wrench
secure the
V-Brace
using the small washers
and the
21mm bolts as shown. Lastly, use the 64
mm
bolts
to secure V-Brace to stretcher as shown.
/