2. Oxford Garden
  3. Travira Modular Seating Connector Assembly

Oxford Garden Travira Modular Seating Connector Assembly Assembly Instructions

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the OXFORD GARDEN TRAVIRA MODULAR seating. This document explains how to connect modular units using the included brackets, bolts, washers, and Allen wrench. I'm ready to help you with any questions you may have about assembling your modular seating.
  • Is assembly required for this unit?
    What is included in the package for securing the modular seating?
    How do I secure modular units together?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
TRAVIRA MODULAR
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
NOTES
There is no assembly required for this unit.
Should you desire to secure modular seating to each other, connecting brackets and hardware are provided in this package.
BOLTS
Quantity: 2BAMetal Washers
Quantity: 2 See pg 2 for instructions
Metal Washers
Quantity: 2
A
B
BOLTS
Quantity: 2
C
ALLEN Wrench
Quantity: 1
Connecting Brackets
Quantity: 2
Ver. 06.30.20
INSTRUCTIONS
STEP 1
Should you desire to secure one modular unit to
another, on a clean flat surface, first lay modular
unit on it’s back, place connecting brackets
over holes located on the under side of the unit.
Using the allen wrench provided, secure brackets
by using washer and bolt as shown.
Ver. 2020.01.28
A
B
A
B
A
B
A
B
A
B
/