Zippity Madison Vinyl Gate Kit Installation guide

Type
Installation guide

This manual is also suitable for

WWW.ZIPPITY-OUTDOOR.COM
1
ASSEMBLY
INSTRUCTIONS ZP19028
WWW.ZIPPITY-OUTDOOR.COM
VER. 020221
ZP19028
ASSEMBLY
INSTRUCTIONS
60 MIN
Approximate assembly me
Want to see a video on how to
assemble this product?
Scan the QR code
MADISON
VINYL GATE KIT WITH
FENCE WINGS

WWW.ZIPPITY-OUTDOOR.COM
2
ASSEMBLY
INSTRUCTIONS
ZP19028
kCheck the inside of the larger pieces in your box for other
materials packed inside.
kWhen assembling components, place on a non-abrasive
surface (i.e. shipping box) to avoid scratching.
kWe recommend an area approximately 5’x 8’ for
unobstructed assembling.
kYou should not need to use excessive force when assembling
components.
VISIT OUR WEBSITE FIRST,
SO WE CAN HELP YOU RIGHT AWAY!
Although great care has been taken to ensure proper packaging
and handling of this product, occasionally problems occur. If you

website to order replacement parts. If you experience any further
trouble with your product, please contact our customer service
department.
parts.nychbrands.com
support@zippity-outdoor.com
704-892-5222 / 877-234-6196
Customer service agents are available to take calls weekdays from 9am-
5pm EST. If you call outside of business hours, please leave a voicemail.
To help you quickly and accurately, please have reference item
number ZP19028
on page 5. It is helpful if you can provide the batch lot which is a
stamped number inside the box.

this product, we are happy to assist you with the process, so
please give us a call at 704-892-5222 / 877-234-6196.
If for some reason you need to return this product, please allow

product, 

GENERAL
INFORMATION
MISSING
OR
DAMAGED
PARTS?
NEED
ASSEMBLY
HELP?
NEED TO
RETURN?
IMPORTANT
WWW.ZIPPITY-OUTDOOR.COM
3
ASSEMBLY
INSTRUCTIONS ZP19028




-
derstand your fence.



install your gate posts before you do anything else.

panel of fence that is connected to another gate post. This way, the weight strain will be
transferred onto two gate posts versus just one. Installing fence panels on both sides


Use joiner clips (included in ZP19001) to aach the gate to the fence
panels.

your gate correctly, please disassemble as necessary, and use the included self-drilling
stainless steel screws to permanently assemble the gate.
1. That you have everything necessary to complete the gate.
2. That you will have assembled the gate frame in the correct order.
3. All of the pieces t and funcon properly.
4. The gate height and width are similar to the measurements shown on page four.
GENERAL
INFORMATION
WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY
INSTRUCTIONS
ZP19028
Madison Vinyl Gate Kit w/ Fence Wings
36 7/8 in
39 3/8 in
2 in 40 7/8 in
6 5/8 in
16 1/2 in
12 1/8 in 12 1/8 in
21 1/2 in
14 in
14 in
8 1/2 in
30 in
2 1/2 in
WWW.ZIPPITY-OUTDOOR.COM
5
ASSEMBLY
INSTRUCTIONS ZP19028
STEP 1:
LAY OUT MATERIALS
A
D
F
B
E
I
J
K
L
M
N
Post Cap 

Picket (9)




 (1)
  (1)



Gate Post
 Post (4)

Gate Hinge
 (1)



 (14)
 (1)
C
HG
 (4)
WWW.ZIPPITY-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19028
STEP 2:
ASSEMBLE GATE FRAME
STEP 2.1 STEP 2.2
Orient the Gate Posts (F) so the tab
is facing up as illustrated. Insert the
gate posts down through the Top
Gate Rail 
(E) as illustrated.
Align the pre-drilled holes
in the gate rails with the pre-
drilled holes in the gate posts.

Self-Drilling Stainless Steel
Screws (L).



corners.
Tabs
Align
Note: The boom of the
boom gate rail does not
have picket holes.
FDE
L
I
STEP 2.3
WWW.ZIPPITY-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS ZP19028
STEP 3:
 PICKETS AND POST CAPS
STEP 3.1

insert the Pickets (H) down
through the top gate rail and


(A) down over the gate posts. The
post caps will lock into place.
1
1
2
2
33
4
H
A
STEP 3.2
WWW.ZIPPITY-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19028
STEP 4:
 HINGES AND LATCH
STEP 4.1
STEP 4.2
Align the Gate
Hinges (J) on the

gate rails as shown.
Pre-drill two holes
on the face of the
gate rails for each
gate hinge using
 (N).
Holes should be

edge of the gate
rail. Fasten each

-
ing Stainless Steel
Screws (M).
Align the Gate Latch (K) to the top gate
rail. Pre-drill four holes into the top gate
rail as shown. Fasten with (4)  black
self-drilling stainless steel screws.
J
M
N
K
WWW.ZIPPITY-OUTDOOR.COM
9
ASSEMBLY
INSTRUCTIONS ZP19028
STEP 5:
ASSEMBLE GATE WINGS
STEP 6:
 GATE WINGS INTO THE GROUND
STEP 5.1
STEP 6.1
STEP 5.2
Insert the Post (G) down through the Top (B)
(C) as illustrated. Align the
pre-drilled holes in the rails with the pre-drilled
holes in the posts and fasten together with (8)

Insert a picket (numbered 1) down through

second gate wing.


B
G
C
Note: Orient the posts as illustrated.
Note: The boom of the
boom rail does not have
a picket hole.
WWW.ZIPPITY-OUTDOOR.COM
10
ASSEMBLY
INSTRUCTIONS
ZP19028
STEP 6.2 STEP 6.3
STEP 6.4 STEP 6.5

using a claw hammer as illustrated. Add
water to loosen soil if necessary.
Use a block of wood to protect the top
of the post and gently hammer each post



compact dirt around the base of each post
to strengthen the unit.
Finish the assembly by pushing the post caps
down over the top of the posts as illustrated.
The post caps will lock into place.
WWW.ZIPPITY-OUTDOOR.COM
11
ASSEMBLY
INSTRUCTIONS ZP19028
STEP 6.6





with water as illustrated.
 Push the fence posts into the holes.
1
2
3
WWW.ZIPPITY-OUTDOOR.COM
12
ASSEMBLY
INSTRUCTIONS
ZP19028
Align the gate hinges against the rails of the gate wing as illustrated. Mark and pre-drill

steel screws. Lastly, align the gate latch catch as shown and pre-drill two holes into the
black self-drilling stainless steel screws.
STEP 7:
 GATE
STEP 7.1
WWW.ZIPPITY-OUTDOOR.COM
13
ASSEMBLY
INSTRUCTIONS ZP19028
STEP 8:
 FENCE PANELS
STEP 8.1
Connect the top and bot-
tom rails of the gate wings
to the fence rails using
joiner clips as shown (joiner
clips are included in fence
box).
WWW.ZIPPITY-OUTDOOR.COM
14
ASSEMBLY
INSTRUCTIONS
ZP19028
WWW.ZIPPITY-OUTDOOR.COM
704-892-5222
877-234-6196
support@zippity-outdoor.com
6935 Reames Rd. Ste. K.
Charloe, NC 28216
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Zippity Madison Vinyl Gate Kit Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI