Extron TLE 350 Template

TLE 350
Extron
Brand
Extron
Model
TLE 350
Type
Template

This manual is also suitable for

Trim Ring Lip
Width = 0.35"
(8.9 mm)
Trim Ring
Outer Edge
(Do not cut
this line.)
SURFACE CUT-OUT AREA
±1/16" (1.5mm)
R = 0.25"
(6.4 mm)
6.00"
(152 mm)
7.50"
(191 mm)
User Access
User Access
PC
LAPTOP
DVD
DOC CAM
AUXILIARY
DISPLAY ON
DISPLAY OFF
AUTO IMAGE
VOLUME
VOLUME
Extron
VideoMore
DVD
Combined
Combined
Cut-Out Template for the Extron
TLE 350, TLP 350CV, and TLP Pro 320C
Page size: 8.5" x 11"
Print scale 1:1
Do not shrink.
1. Confirm the product to be installed.
2. Before printing, double-check the
print settings and make sure the page
is not scaled.
3. After printing, measure the cut-out area
(gray) and ensure the dimensions are the
same as those shown.
4. Remove the surface cut-out area from the
template.
5. Mark the position on the mounting surface
where the enclosure is being installed.
6. Double check dimensions and position,
then cut the opening.
68-2769-01 Rev. B
  • Page 1 1

Extron TLE 350 Template

TLE 350
Extron
Brand
Extron
Model
TLE 350
Type
Template
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents