Edsal PC101 Assembly Manual

Insert

and

align

Assembly Instructions

The Post Coupling has been designed to connect 2 slotted posts together.

Post Coupling

PC101

Instruction Sheet

Step 2 - Insert the Post Coupler

into the post, making sure that

the posts are aligned with the

grooves on the Coupler rivets.

Step 1 - Place the 2 posts side-

by-side and align the holes.

Top View

Side View

Step 3 - Tap Post coupling

down until rivets are fully en-

gaged. Make certain each post

is held by both rivets.

Tap down