Steris One Solution St Vesphene Iii Pre-Measured Wfi Operating instructions

Brand: Steris

Model: One Solution St Vesphene Iii Pre-Measured Wfi

Type: Operating instructions

11"

4.25"

STERIS Corporation

Products / Vesphene family / 1S15 One Solution - Vesphene

IIIst / Design / 1S15-CXA / 1S15-06B

PMS 292 BLUE BANNER

REST BLACK

DO NOT PRINT SPOT RED TEMPLATE

One Solution st Pre-measured WFI should not be used for

intravenous injection or as a diluent in a drug dosage

form. This product is for use only with Vesphene IIIst

Phenolic Disinfectant. Refer to attached foil packet of Cleaner

Disinfectant for appropriate precautionary information.

Directions for use: Empty contents into an appropriate cleaning

vessel and add contents from Cleaner Disinfectant foil packet. Gently

mix until solution is uniform.

Contents: One Solution st Pre-measured WFI was filled with

0.2-micron-filtered USP Water For Injection quality water and post-

process gamma-irradiated to 10-6 SAL and is for use only as diluent

for attached disinfectant.

For industrial and institutional use only. Not for home use.

STERIS Corporation

7501 Page Avenue ■ St. Louis, MO 63133 ■ USA

800-548-4873

Net Contents:

29.5 mL (1 fl. oz.) Disinfectant

3.78 Liters (1 Gal.) Premeasured WFI

Reorder Number:

1S15CX

Premeasured WFI

®

One Solution st®

Vesphene® III

STERILE UNLESS PACKAGE IS COMPROMISED

One Solution st® Vesphene® III is a sterile, conveniently packaged,

ready-to-use pre-measured water source for mixing with Vesphene

IIIst Phenolic Disinfectant. It provides a ready-to-use solution for use

in disinfecting clean rooms and other high risk manufacturing areas.

Start 10/22/18

10/22/18

1:02 pm

LB

1S15-06B(1018) 62998 Product Made in U.S.A.

1

Steris One Solution St Vesphene Iii Pre-Measured Wfi Operating instructions

Brand: Steris

Model: One Solution St Vesphene Iii Pre-Measured Wfi

Type: Operating instructions

Related papers

Other documents