Steris One Solution St Lph Iii Premeasured Wfi Operating instructions

Type
Operating instructions
11"
4.25"
1S16-06B(1018) 62993 Product Made in U.S.A.
PMS 7431 RED BANNER
REST BLACK
DO NOT PRINT SPOT RED TEMPLATE
One Solution st Pre-measured WFI should not be used for intravenous
injection or as a diluent in a drug dosage form. This product is for
use only with LpH® III st Phenolic Disinfectant. Refer to attached
foil packet of Cleaner Disinfectant for appropriate precautionary
information.
Directions for use: Empty contents into an appropriate cleaning
vessel and add contents from Cleaner Disinfectant foil packet. Gently
mix until solution is uniform.
Contents: One Solution st Pre-measured WFI was filled with
0.2-micron-filtered USP Water For Injection quality water and post-
process gamma-irradiated to 10-6 SAL and is for use only as diluent
for attached disinfectant.
For industrial and institutional use only. Not for home use.
STERIS Corporation
7501 Page Avenue St. Louis, MO 63133 USA
800-548-4873
Net Contents:
29.58 mL (1 fl. oz.) Disinfectant
3.78 Liters (1 Gal.) Pre-measured WFI
Reorder Number:
1S16CX
®One Solution st®
LpH® III
Premeasured WFI
STERILE UNLESS PACKAGE IS COMPROMISED
One Solution st® LpH® III Pre-measured WFI is a sterile, conveniently
packaged, ready-to-use pre-measured water source for mixing with
LpH® III st Phenolic Disinfectant. It provides a ready-to-use solution for
use in disinfecting clean rooms and other high risk manufacturing areas.
STERIS Corporation
Products / LpH family / 1S16 One Solution LpH III st / Design / 1S16-06B
Previous Products / LpH family / 1S16 One Solution LpH III st / Design / 1S16-06A
Start Date 10/22/18
10/22/18
12:50 am
LB
  • Page 1 1

Steris One Solution St Lph Iii Premeasured Wfi Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI