Steris One Solution St Process Npd St Pre-Measured Wfi Operating instructions

Brand: Steris

Model: One Solution St Process Npd St Pre-Measured Wfi

Type: Operating instructions

11"

4.25"

Start Date: 11/17/16

12/20/17

5:00 pm

MT

PMS 3425 GREEN COLOR BAND

REST BLACK

DO NOT PRINT SPOT RED TEMPLATE

STERILE UNLESS PACKAGE IS COMPROMISED

One Solution st® Process NPD® Premeasured WFI water is a sterile,

conveniently packaged, ready-to-use pre-measured water source

for mixing with Process NPD st One-Step Germicidal Detergent.

It provides a ready-to-use solution for use in cleaning and disinfecting

clean rooms and other high risk manufacturing areas.

One Solution st® Process NPD® Premeasured WFI should

not be used for intravenous injection or as a diluent in a drug

dosage form. This product is for use only with Process NPD st

One-Step Germicidal Detergent. Refer to attached foil packet and

insert of the germicidal detergent for appropriate Directions For Use

and precautionary information.

Contents: One Solution Premeasured WFI was filled with

0.2-micron-filtered USP Water For Injection quality water

and post-process gamma-irradiated to 10-6 SAL and is for

use only as diluent for attached disinfectant.

For industrial and institutional use only. Not for home use.

STERIS Corporation

7501 Page Avenue ■ St. Louis, MO 63133 ■ USA

800-548-4873 ■ www.steris.com

1S23-06C(1117) 62842 Product Made in U.S.A.

Net Contents:

15 mL (1/2 fl. oz.) Germicidal Detergent

3.78 Liters (1 Gal.) Premeasured WFI

Reorder Number:

1S23-HP

Premeasured WFI

®One Solution st®

Process NPD®

1

Steris One Solution St Process Npd St Pre-Measured Wfi Operating instructions

Brand: Steris

Model: One Solution St Process Npd St Pre-Measured Wfi

Type: Operating instructions

Related papers

Other documents