Steris One Solution St Vesta-Syde Sq Premeasured Wfi Operating instructions

Type
Operating instructions
11"
4.25"
Start Date: 10/9/18
10/9/18
8:10 am
LB
PMS 3425 GREEN COLOR BAND
REST BLACK
DO NOT PRINT SPOT RED TEMPLATE
STERILE UNLESS PACKAGE IS COMPROMISED
One Solution st® Vesta-Syde® SQ Premeasured WFI water is a sterile,
conveniently packaged, ready-to-use pre-measured water source for
mixing with Vesta-Syde SQ st Quaternary Ammonium Disinfectant. It
provides a ready-to-use solution for use in disinfecting clean rooms and
other high risk manufacturing areas.
One Solution st® Vesta-Syde® SQ Premeasured WFI should not be
used for intravenous injection or as a diluent in a drug dosage form. This
product is for use only with Vesta-Syde SQ st Quaternary Ammonium
Disinfectant. Refer to attached foil packet and insert of disinfectant for
appropriate Directions For Use and precautionary information.
Contents: One Solution st Pre-measured WFI was filled with
0.2-micron-filtered USP Water For Injection quality water and post-
process gamma-irradiated to 10-6 SAL and is for use only as
diluent for attached disinfectant.
For industrial and institutional use only. Not for home use.
Net Contents:
29.57 mL (1 fl. oz.) Disinfectant
3.78 Liters (1 Gal.) Premeasured WFI
Reorder Number:
1S22CX
Premeasured WFI
®One Solution st®
Vesta-Syde® SQ
STERIS Corporation
7501 Page Avenue St. Louis, MO 63133 USA
800-548-4873 www.steris.com
1S22-06D(1018) 62799 Product Made in U.S.A.
Steris Corp.
Products / One Solution-Vesta Syde / Labels / Design / 1S22-06D
  • Page 1 1

Steris One Solution St Vesta-Syde Sq Premeasured Wfi Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI