ZEBRONICS Zeb-Thunder User guide

FAQ

How to connect the headphone ?

A: Press the Power key to turn ON the headphone and it would go the Bluetooth mode

by default.

Scan for ZEB-THUNDER headphone on your mobile and connect it. (Password - 0000,

if prompted)

What are the different modes in the headphone ?

A: Wireless BT / FM / Micro SD / AUX

How to tune FM channels?

A: Long press the Play/Pause button to Switch the headphones to FM mode.Short Press

the Play/Pause button once to start scanning the FM channels.

Once the scanning is complete, the headphone will start playing from first saved

channel.

To change the channels you can use next/previous buttons.

What are the different LED indicators?

A: Red LED glowing - Charging.

Red LED turns Blue - Full charge.

Blue LED blinks - BT Discover Mode.

Blue LED glows constantly - Headphone is connected to a device

How to increase/decrease the volume level of the headphone?

A: Short press the + / - button to increase / decrease the volume respectively.

What is the charging voltage?

A: DC 5V with micro USB cable.

What is the operating range of the headphone in wireless mode?

A: 8-10 meters.

What is the maximum capacity of microSD card that the headphone can support?

A: 32GB.

Does the headphone have call function?

A: Yes.