FAQs
How to Power ON/OFF ZEB-ACTION?
A: Long press the "POWER" button to Power ON/OFF the speaker.
How to connect ZEB-ACTION for a wireless music experience?
A: When ZEB-ACTION is in BT mode, search for nearby BT devices in your mobile. Tap the name "ZEB-
ACTION" and connect to it.
(Password - 0000, if prompted)
What are the different modes in ZEB-ACTION speaker and how to change them?
A: Single press the mode("M") button to toggle between different modes as given below,
BT Wireless / Micro SD / USB / FM Mode / AUX.
How to use TWS mode with ZEB-ACTION?
A: TWS mode requires 2 nos. of ZEB-ACTION speakers. While the speakers are ON, long press the
mode("M") button on either of the speakers, till you hear a tone indicating that the TWS mode is
activated.
Now the speakers will automatically get paired with each other. Scan for "ZEB-ACTION" on your
device's BT menu and connect to it.
The songs played hereafter, will be played on both the speaker in a stereo setup
Does ZEB-ACTION support call function and how to use it?
A: Yes, while your device is connected to the speaker through BT,
Single press "POWER" button - Answer an incoming call/Disconnect a call.
Long press "POWER" button - Reject an incoming call.
Double press "POWER" button - Re-dial previous number.
What is the maximum storage size of the USB/microSD card supported by ZEB-ACTION?
A: 32GB.
How to use Pendrive(USB)/microSD card?
A: Once the Pendrive(USB)/microSD card is inserted in the speaker, it automatically enters the
USB/microSD mode.
How to control media in ZEB-ACTION?
A: Single press "POWER" button - Play/Pause.
Single press "+" button - Next track.
Single press "-" button - Prev. track.