How to connect with ZEB- Evolve with my smart phone’s bluetooth?
A: Power ON the earphone by pressing and holding the multifunctional button till you
find the Red and Blue LED blinking alternatively. Enter the bluetooth settings of your
smartphone and scan for available devices. Click on the BT name ZEB-Evolve
Does the earphone have call function?
A: Yes, follow the below instructions to use call function:
Single press the multifunctional button to answer / hang-up a call.
Press and hold the multifunctional button to reject an incoming call.
Double press the multifunctional button to redial to the previous number.
What are the different LED indications?
A: Red and Blue LED blinks alternatively - BT discovery mode.
Blue LED blinks once in 5 seconds - Paired in BT
Red LED glows - Earphone is getting charged
LED goes off - Earphone is charged to 100%
How to control media / volume in ZEB- Evolve ?
A: Press and hold the + button to go to next song.
Press and hold the - button to go to the previous song.
Single press the + / - button to increase / decrease the volume.
What are the different LED indicators?
A: Green LED Blinking - Charging
Green LED Glows - Fully charged
Blue LED blinks - Discover Mode.
Blue LED glows - Speaker is connected to a device
How to charge the earphone?
A: Kindly use a 5V DC adapter to charge the earphone.
How to trigger voice assistant using ZEB- Evolve ?