MusicMan
®
Bluetooth Headphone BT–X14
User Manual
The Declaration of Conformity is under the Internet link: www.technaxx.de/ (in bottom bar
“Konformitätserklärung”); Before using the device, read the user manual carefully.
With this comfortable BT headphone you have surround sound experience
Features
Music transfer through Bluetooth version 3.0 with transmitting distance ~ 10 m
Listen to music or make telephone calls in a absolutely “quiet room”
Headphone restrains ambient noise and side tones, like sitting in a soundproof cabin
LED indicator shows the working status
Make phone calls wireless via Bluetooth
When incoming call, music playback is paused automatically
Supports computer, MP3, CD & AUX–IN
Foldable headphone with soft cushioning for comfortable fit
Balanced-clear sound performance in low and high sound ranges
Supports PC voice communication (with a special MIC cable, not included)
Technical Specifications
Bluetooth version Bluetooth version 3.0 + EDR
Bluetooth profiles HFP, HSP, A2DP, AVRCP
BT transmitting distance ~ 10 m
Wireless transmission distance Class II
Frequency range 20Hz – 20KHz
Power supply Built-in lithium-ion 350mAh battery
Charging time 2 – 3 hours
Playing time 10 – 12 hours (medium volume)
Standby time approx. 2 weeks
Maximum volume 95 dB
Speaker impedance 32 Ω
Speaker driver 50 NW
Memory Supports MicroSD cards up to 32GB
Weight / Dimensions
202 g / Headphone shell Ø 7 x 8 cm / Headphone (W)
18 x (H) 19 x (Width headphone temple) 3 cm
Package Contents
MusicMan Bluetooth Headphone BT–X14, AUX–N cable
(L) 120cm, Micro USB charging cable (L) 65cm, User Manual
Charging the headphone
Before first use, fully load the battery with the included original Micro USB charging cable.
Connect the Micro USB charging cable* (*included) to a charger or computer USB port, and
the other end to the Miro USB charging port (7) of the headphone.
The RED light shines bright while charging. When the headphone is fully charged, the RED
light turns off.
Product overview
1. Turn on (MP3) – OFF – BT function (see key 1)
1
Function switch (MP3 – OFF – BT)
2
Play / Pause key
3
Volume + / Next song
4
Volmue – / Previous song
5
LED indicator light
6
Microphone hole
7
Micro USB charging port (ON USB)
8
MicroSD card slot
9
AUX–IN port
1.1. Turn ON the headphone
If you put the function switch from OFF to
the left (MP3) then the speaker turns on.
If you put the function switch from OFF to
the right (BT), it will enter into Bluetooth
mode automatically with the BLUE light
in quick flash.
1.2. Turn to the BT mode
If you put the function switch from ON to the right (BT). The headphone will turn to the BT
mode. The BLUE light is blinking fast until the BT connection to the BT compatible mobile
device is established. Open your BT setting in your mobile device. Search on your BT
compatible mobile device with the name «Musicman BT Head», select the headphone and
connect.
1.3. Turn OFF the headphone
Put the function switch to OFF. The headphone turns OFF after the RED light flash.
2. Bluetooth Pairing
2.1. Turn to the BT mode (see 1.2.)
2.2. After successful pairing the BLUE light fashs lowly. If you want to try another NEW
BT connection, disconnect the old BT connection and search on your BT compatible mobile
device, select the headphone and connect it again.
3. Bluetooth Music
After successful pairing, click the key once to play the music sourcing from your
mobile. Click again to pause.
Change songs: Press short key for the next song, press short key for the
previous song. Adjust volume: Press and hold long key to increase the volume, press
and hold long key to decrease
the volume.
4. Bluetooth Phone Calls
4.1. When there is an incoming phone call, click the key to answer the call through
your headphones.
4.2. Press and hold the key for 3 seconds to reject the call when there is an incoming
phone call.
4.3. Press and hold the key for 3 seconds to switch the call onto your mobile phone
when answering the call. Press and hold on the key for 3 seconds again to return to
Bluetooth answering on your headphones.
4.4. Click the key once to hang up
the call when answering.
5. Memory Card Mode
5.1. Insert a MicroSD card into the MicroSD card slot (TF card slot). Then start to the music
from it with MP3/WMA mode, at this time the blue light flash slowly. Then press one
time will be pause music and press again will continue to play music.
5.2. Press shortly and you hear the previous song. Press shortly and you hear
the next song.
5.3. Press long and you decrease the volume. Press long and you increase the
volume.
6. FM Radio Mode
6.1. You are in the MP3 mode and NO MicroSD card is inserted:
The FM radio mode starts automatically. If a channel is received (frequency range 87.5 –
108.0MHz), you hear the channel; if no channel is received, you hear a rushing noise. In
that case you have to search for a channel. Press shortly key. While searching the
BLUE light is flashing quickly (operation keys will not work). After finished researching, the
headphone plays the first channel found. When a channel is found, the BLUE light is
flashing slowly.
6.2. You are in the MP3 mode and a MicroSD card is inserted:
You have to press long on the key to start FM radio mode. If a channel is received
(frequency range 87.5 – 108.0MHz), you hear the channel; if no channel is received, you
hear a rushing noise. In that case you have to search for a channel. Press shortly key.
While searching the BLUE light is flashing quickly (operation keys will not work). After
finished researching, the headphone plays the first channel found. When a channel is found,
the BLUE light is flashing slowly.
6.3. Scanned channels will be saved automatically. Change channel: press key to
change to the previous channel, press key to change to the next channel.
6.4. Adjust volume: press and hold key to increase the volume, press and hold
key to decrease the volume.
7. Line–IN Mode
When you are in the LINE–IN mode, you can
hear the audio sourcing from other devices
(e.g. computer).
Insert the AUX–IN cable into the AUX–IN port
(like shown in the picture).
The headphone will turn OFF automatically
to save electricity.
8. How to fold the headphone
Fold both earphone shells carefully inward. Now you have an easy to transport headphone
with the size of (W) 19 cm x (H) 11 cm.
Warnings
Do not attempt to disassemble the headphone, it may result in short-circuit or even
damage.
Do not drop, shake or dismantle the headphone, it may break internal circuit boards or
mechanics.
Do not expose the headphone to an environment with high humidity or high temperature,
extensive heat or direct sunlight, moist or underwater conditions.
Keep the surface of the headphone clean, but do not use organic solvents.
Keep the headphone away from little children.
Hints for Environment Protection: Packages materials are raw materials and can be
recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning:
Protect the device from contamination and pollution (use a clean drapery). Avoid using
rough, coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned device.
Important Notice: Should battery fluid leak from a battery, wipe the battery-case with a soft
cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388
Frankfurt a.M., Germany
-
1
-
2
-
3
-
4
-
5
-
6
