1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
1BULBREQUIRED
BULBNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Inner Backplate
x1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts before beginning the installation.
Missing or damaged parts? Contact your original place of purchase.
Fixture Body
x1
Inner Backplate Wiring
Table of
Contents
STEP 2 STEP 3
COutlet Box Screw
x2
DWire Connector
x3
E
Fixture Body
STEP 4
Bulb
STEP 5
Lock Screw
x2
B
Glass
x1
F
Glass
STEP 1
Caulk
STEP 6
Installation Instructions: UQL1522
www.urbanambiance.com
2of3
STEP 1 1 2
STEP 2
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
3of3
STEP 4
STEP 5
STEP 6
Exterior Caulk
www.urbanambiance.com
/
