2. urban ambiance
  3. UQL1501

urban ambiance UQL1501 Installation guide

  • Hello! I'm a chat assistant that has reviewed the installation instructions for the urban ambiance UQL1501 light fixture. I've noted the warnings, required bulb type, mounting options, and wiring steps. I'm ready to answer your questions about the installation process.
  • What type of bulb is required?
    What should I do before starting the installation?
    What is the first installation step?
1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
150W
MAX
1BULBREQUIRED
BULBNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Crossbar
Assembly
x1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
E
Crossbar Assembly Wiring Shade and Bulb
Table of
Contents
STEP 2 STEP 3 STEP 5
Fixture Body
STEP 4
Caulk
STEP 6
Alternate
Mounting
Screw
x2
B
Alternate
Mounting Screw
STEP 1
Outlet Box Screw
x2
C
Wire Connector
x3
D
Shade
x1
F
Socket Collar
x1
G
Installation Instructions: UQL1501
www.urbanambiance.com
STEP 1
OPTION 1 OPTION 2
Included
(Pre-assembled)
Included
Standard
Mounting
Screw
Alternate
Mounting
Screw
skip to next page
1 2 3
Steps 1-3 to remove standard mounting screws
56
Steps 4-6 to reassemble with alternate mounting screws
4
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting backplate to mounting screws
2of3
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 3
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
STEP 4
STEP 5
3of3
STEP 6
Exterior Caulk
www.urbanambiance.com
/