ASRock Rack SPC741D8-2L2T/BCM Installation guide

ASRock Rack
Brand
ASRock Rack
Model
SPC741D8-2L2T/BCM
Category
Motherboards
Type
Installation guide
SPC741D8-2L2T/BCM | SPC741D-2T/BCM
Quick Installation Guide
www.asrockrack.com SPC741D8-2L2T/BCM SPC741D8-2T/BCM
4
2
P/N: 15G065273000AK V1.0
Motherboard Layout
Jumper Settings
The server board User's Manual is available for download from the ASRock Rack's ocial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
When the jumper cap is placed on t he pins, t he
jumper is “Short”. If no jumper cap is placed on the
pins, the jumper is “Open”.
e illustration shows a 3-pin jumper whose pin1 and
pin2 are “Short” when a jumper cap is placed on these
2 pins.
*15G065273000AK*
Install the Server Board1
1Insert the server board into the chassis.
2Affix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
I/O Panel3
26.7 cm (10.5 in)
30.5 cm (12 in)
UID1
T:USB3_2
B:USB3_1
IPMI_LAN
USB 3.2
Gen1 Ports
LAN2
LAN1
VGA1
Intel C741
CPU0
BMC
ROM
BMC_SMB_1 IPMB_1
FLASH_SEC
_OVERRIDE1
BIOS
ROM
RAID_1
AUX_PANEL1
SPEAK1
TR1 PANEL1
SATA_0_1
BAT1
FAN3
FAN4
FAN5
FAN6
ATX12V1
ATX12V2
ATX12V3
MCIO1
MCIO2
ATX4PIN1
PWM_CFG1
DDR5_D1
DDR5_C1
DDR5_B1
DDR5_A1
DDR5_E1
DDR5_F1
DDR5_G1
DDR5_H1
FAN1
FAN2
M2_1
USB3_3_4
TPM_BIOS_PH1
SATA0_SGPIO
SATA1_SGPIO
NMI_BTN1
PASSWORD
_CLEAR1
ME_RECOVERY1
BIOS_SWAP
_OVERRIDE1
CLRMOS1
NUT80_2
NUT110
SPC741D8-2L2T/BCM
PSU_SMB1
MCIO3
USB_2_3
M2_2
Dr. Debug
COM1
CPU1_HSBP1
FRONT_LED_LAN34
PECI1
LAN_3_4
NUT110_2
NUT80
NUT42
MINISAS_1
PCIE7
PCIE5
PCIE3
PCIE1
ASPEED
AST2600
Broadcom
57416
SPC741D8-2T/BCM
(SPC741D8-2L2T/BCM only)
(SPC741D8-2T/BCM only)
1
8
9
7
11
17
14
15
12
13
16
18
19
23 4
10
21
23
24
25
26
283031353637
5
6
20
27
29
3233343839404142434445
47
46
50
48
49
22
No. Description
12 x 288-pin DDR5 DIMM Slots
(DDR5_A1, DDR5_C1)
22 x 288-pin DDR5 DIMM Slots
(DDR5_B1, DDR5_D1)
3 PSU SMBus Header (PSU_SMB1)
4 System Fan Connector (FAN1)
5 Mini Cool Edge IO x8 Connector (MCIO1)
6 Mini Cool Edge IO x8 Connector (MCIO2)
7 System Fan Connector (FAN2)
8 PWM Conguration Header (PWM_CFG1)
9Micro-Fit ATX 4Pin Power Connector
(ATX4PIN1)
10 2 x 288-pin DDR5 DIMM Slots
(DDR5_E1, DDR5_G1)
11 ATX 12V Power Connector (ATX12V1)
12 ATX 12V Power Connector (ATX12V2)
13 2 x 288-pin DDR5 DIMM Slots
(DDR5_F1, DDR5_H1)
14 System Fan Connector (FAN3)
15 System Fan Connector (FAN4)
16 ATX 12V Power Connector (ATX12V3)
17 SATA3 Connectors (SPC741D8-2T/BCM only)
(SATA3_1)(Upper), (SATA3_0)(Lower)
18 M-key M.2 Socket (M2_2)
(Type 22110/2280)
19 Mini Cool Edge IO x4 Connector (MCIO3)
20 SATA SGPIO Connector (SATA0_SGPIO)
21 MiniSAS HD SATA/PCIE Selection Jumper
(MINISAS_1)
22 Clear CMOS Pad (CLRMOS1)
23 USB 3.2 Gen1 Header (USB3_3_4)
24 SATA SGPIO Connector (SATA1_SGPIO)
25 System Fan Connector (FAN5)
26 M-key M.2 Socket (M2_1)
(Type 22110/2280/2242)
27 System Fan Connector (FAN6)
28 Virtual RAID On CPU Header (RAID_1)
29 USB 2.0 Header (USB_2_3)
30 System Panel Header (PANEL1)
31 Auxiliary Panel Header (AUX_PANEL1)
32 SPI TPM Header (TPM_BIOS_PH1)
33 Front LAN LED Connector
(FRONT_LED_LAN34)
34 Serial Port Header (COM1)
35 Backplane PCI Express Hot-Plug Connector
(CPU1_HSBP1)
36 ermal Sensor Header (TR1)
37 Speaker Header (SPEAK1)
38 CPU PECI Mode Jumper (PECI1)
39 Non Maskable Interrupt Button
(NMI_ BT N1)
40 ME Recovery Jumper (ME_RECOVERY1)
41 Password Reset Jumper
(PASSWORD_CLEAR1)
42 BIOS Swap Override Jumper
(BIOS_SWAP_OVERRIDE1)
43 Flash Override Jumper
(FLASH_SEC_OVERRIDE1)
44 Intelligent Platform Management Bus
Header (IPMB_1)
45 BMC SMBus Header (BMC_SMB_1)
46 PCI Express 5.0 x16 Slot (PCIE1)
47 PCI Express 5.0 x16 Slot (PCIE3)
48 PCI Express 5.0 x16 Slot (PCIE5)
49 PCI Express 5.0 x16 Slot (PCIE7)
50 LGA 4677 CPU Socket (CPU0)
6
2
1
4
3 5 78
No. Description No. Description
1 USB 3.2 Gen1 Ports (USB3_1_2) 5 10G LAN RJ-45 Port (LAN1)
2 LAN RJ-45 Port (IPMI_LAN) 6 10G LAN RJ-45 Port (LAN2)
31G LAN RJ-45 Port (LAN3)
(SPC741D8-2L2T/BCM only) 7VGA Port (VGA1)
41G LAN RJ-45 Port (LAN4)
(SPC741D8-2L2T/BCM only) 8 UID Switch (UID1)
SPC741D8-2L2T/BCM | SPC741D-2T/BCM
Quick Installation Guide
www.asrockrack.com SPC741D8-2L2T/BCM SPC741D8-2T/BCM
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
5
Remove the CPU socket cover and open
the socket lever.
Align and install the processor on the
carrier and make sure the arrow is located
in the correct direction. Close the socket
lever.
Carefully ip the carrier assembly. Apply
a thermal paste.
Install the heatsink to the CPU carrier.
en install the heatsink and CPU carrier
to the socket.
Install the Processor and Heatsink
1
2
CPU Carrier
Socket Dust Cover
3
4
6
5
180o
7
CPU Carrier
8
Socket
CPU Carrier
Heatsink
Tighten the corner fasteners. Secure
the heastink to the motherboard with a
screwdriver.
7Install the PCIE Card
1Remove the bracket facing the slot that
you intend to use. Keep the screw for later
use.
2Align the card connector with the slot and
press rmly until the card is completely
seated on the slot.
Fasten the card to the chassis with the
screw.
3
6LAN Port LED Indications
IPMI LAN Port Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or no
link
Blinking Yellow Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
10G LAN Port Activity / Link LED Speed LED
Status Description Status Description
O No Link O 100Mbps connection or no
link
Blinking Green Data Activity Orange 1Gbps connection
On Link Green 10Gbps connection
9
10
8M.2 SSD Module Installation
ATX4 PIN1
ATX12V
Micro-Fit Power Connector
24pin-to-4pin
Converter Cable
12
34
ATX_PWROK
PSON#
GND
ATX_+5VSB
4
8
1
5
12V
GND
10 Install the Power Cables
9Install the Memory
123
Unlock a DIMM slot by
pressing the module clips
outward.
Insert the memory module. Lock the clips.
(SPC741D8-2L2T/BCM only)
3Peel o the yellow protective lm on the nut.
Hand tighten the stando into the desired
location.
Gently insert the M.2 module into the slot.
4
Tighten the screw with a screwdriver to secure
the module into place. Please do not overtighten
the screw.
5
1Find the corresponding nut location to be used.
123
A B C
4.2cm 8cm 11cm
Type
2242
Type
2280
Type
22110
M2_1:
1 2
B C
8cm 11cm
Type
2280
Type
22110
M2_2:
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or no
link
Blinking Yellow Data Activity Yellow 100M connection
On Link Green 1Gbps connection
LAN Port
ACT/LINK LED
SPEED LED
1G LAN Port
LAN Port
ACT/LINK LED
SPEED LED
LAN Port
ACT/LINK LED
SPEED LED
2
3
BC A
1
2Move the stando based on the module type and
length.
BC A
BC A
20o
BC A
BC A
NUT1NUT2
C
  • Page 1 1
  • Page 2 2

ASRock Rack SPC741D8-2L2T/BCM Installation guide

ASRock Rack
Brand
ASRock Rack
Model
SPC741D8-2L2T/BCM
Category
Motherboards
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers