ASRock Rack SPC741D8HM3 Installation guide

ASRock Rack
Brand
ASRock Rack
Model
SPC741D8HM3
Type
Installation guide
SPC741D8HM3
Quick Installation Guide
www.asrockrack.com SPC741D8HM3
2
P/N: 15G065277000AK V1.0
Motherboard Layout
The server board User's Manual is available for download from the ASRock Rack's ocial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place the
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
Jumper Settings
When the jumper cap is placed on the pins, the jumper is
“Short”. If no jumper cap is placed on the pins, the jumper
is “Open”.
e illustration shows a 3-pin jumper whose pin1 and pin2
are “Short” when a jumper cap is placed on these 2 pins.
*15G065277000AK*
Install the Server Board1
1Insert the server board into the chassis.
2Affix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
SPEAKER1
VGA1
IPMI_LAN1
UID1
USB 3.2
Gen1
B: USB1
M2_2
COM1
BMC
ROM
FRNT_VGA
PWM_CFG1
CPU0
PSU_SMB1 CPU0_HSBP1
USB3_3_4
12VCON1
FAN1
FAN2
FAN3
FAN4
FAN5
FAN6
FAN7
FAN8
ME_RECOVERY1 AUX_PANEL1 PANEL1
SATA_SGPIO1
M2_1
TPM_BIOS_PH1
BIOS
ROM
IPMB1 BMC_SMB1
T: USB2
DDR5_D1
DDR5_C1
DDR5_B1
DDR5_A1
DDR5_F1
DDR5_E1
DDR5_G1
DDR5_H1
PCIE 2
PCIE 1
MCIO4
MCIO3
MCIO1
MCIO2
VT_+BAT1
ASPEED
AST2600
OCP1
CLRMOS1
NUT110_2
SPC741D8HM3
TR1
OCU2
12VCON3
SATAPWR1
RAID_1
12VCON2
CM_SB_R
OCU1
PECI1
PASSWORD_CLEAR1
BIOS_SWAP_OVERRIDE1
FLASH_SEC_OVERRIDE1
NMI_BTN1
NUT80_1
J1
16.8cm (6.6in)
8.1cm (3.2in)
43.2cm (17in)
11
12
35
2
5
6
7
44
1
13
14
15
16
17
18
19
2023 21222527 2429
34
33
32
30
36
39
26
38
37
46
47
41
31
28
8
48
43
50
51
4
42
9
40
3
49
10
52
45
53
No. Description
1 UID Switch (UID1)
2 USB 3.2 Gen1 Ports (USB3_1_2)
3 LAN RJ-45 Port (IPMI_LAN1)
4 Mini Display Port (VGA1)
I/O Panel3
4
3
12
No. Description
1Password Reset Jumper
(PASSWORD_CLEAR1)
2Non Maskable Interrupt Button
(NMI_BTN1)
3Flash Security Jumper
(FLASH_SEC_OVERRIDE1)
4BIOS Swap Override Jumper
(BIOS_SWAP_OVERRIDE1)
5 Front VGA Header (FRNT_VGA)
6 PCI Express 5.0 x16 Slot (PCIE1)
7 ermal Sensor Header (TR1)
8OCuLink Connector
(2 SATA 6Gb/s) (OCU2)
9 SPI TPM Header (TPM_BIOS_PH1)
10 LGA 4677 CPU Socket (CPU0)
11 2 x 288-pin DDR5 DIMM Slots
(DDR5_B1, DDR5_D1)
12 2 x 288-pin DDR5 DIMM Slots
(DDR5_A1, DDR5_C1)
13 System Fan Connector (FAN2)
14 System Fan Connector (FAN1)
15 Micro-Hi Power Connector (12VCON3)
16 Intelligent Platform Management Bus
Header (IPMB1)
17 BMC SMBus Header (BMC_SMB1)
18 Serial Port Header (COM1)
19 SATA SGPIO Connector
(SATA _ SGPIO1)
20 System Fan Connector (FAN5)
21 System Fan Connector (FAN6)
22 Mini Cool Edge IO x8 Connector
(MCIO3)
23 Micro-Hi Power Connector (12VCON1)
24 Mini Cool Edge IO x8 Connector
(MCIO4)
25 PWM Conguration Header
(PWM_CFG1)
26 Mini Cool Edge IO x8 Connector
(MCIO2)
No. Description
27 System Fan Connector (FAN7)
28 Mini Cool Edge IO x8 Connector
(MCIO1)
29 System Fan Connector (FAN8)
30 Front Panel Board Header (J1)
31 Virtual RAID On CPU Header
(RAID_1)
32 SATA Power Connector (SATAPWR1)
33 Speaker Header (SPEAKER1)
34 Backplane PCI Express Hot-Plug
Connector (CPU0_HSBP1)
35 System Fan Connector (FAN3)
36 System Fan Connector (FAN4)
37 Micro-Hi Power Connector (12VCON2)
38 CM Board Standby Power Header
(CM_SB_R)
39 PSU SMBus Header (PSU_SMB1)
40 Clear CMOS Pad (CLRMOS1)
41 System Panel Header (PANEL1)
42 Auxiliary Panel Header
(AUX_PA NEL1)
43 USB 3.2 Gen1 Header (USB3_3_4)
44 2 x 288-pin DDR5 DIMM Slots
(DDR5_F1, DDR5_H1)
45 umbscrew
46 2 x 288-pin DDR5 DIMM Slots
(DDR5_E1, DDR5_G1)
47 OCuLink Connector
(4 SATA 6Gb/s) (OCU1)
48 ME Recovery Jumper
(ME_RECOVERY1)
49 M-key M.2 Socket (M2_2) (Type 22110)
50 M-key M.2 Socket (M2_1) (Type 2280)
51 PCI Express 5.0 x16 Slot (PCIE2)
52 OCP NIC 3.0 Slot (PCIe5.0 x16) (OCP1)
53 CPU PECI Mode Jumper (PECI1)
4
SPC741D8HM3
Quick Installation Guide
www.asrockrack.com SPC741D8HM3
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
5
Remove the CPU socket cover and open
the socket lever.
Align and install the processor on the
carrier and make sure the arrow is located
in the correct direction. Close the socket
lever.
Carefully ip the carrier assembly. Apply
a thermal paste.
Install the heatsink to the CPU carrier.
en install the heatsink and CPU carrier
to the socket.
Install the Processor and Heatsink
1
2
CPU Carrier
Socket Dust Cover
3
4
6
5
180o
Tighten the corner fasteners. Secure
the heastink to the motherboard with a
screwdriver.
6LAN Port LED Indications
IPMI LAN Port
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or no
link
Blinking Yellow Data Activity Yellow 100Mbps connection
On Link Green 1Gbps connection
9
10
10 Install the Memory
123
Unlock a DIMM slot by
pressing the module clips
outward.
Insert the memory module. Lock the clips.
7
CPU Carrier
8
Socket
CPU Carrier
Heatsink
7Install the Power Cables
48
15
12V
GND
48
15
12V
GND
1Remove the bracket facing the slot
that you intend to use on the chassis.
Keep the screw for later use.
Align the riser-card assembly
connector with the slot on the
system board. Press rmly until the
riser-card assembly is completely
seated on the slot.
Fasten the card to the chassis with
the screw.
*Images shown are for illustrative purposes only and may dier depending on
model.
2Install the PCIE card to the riser
card.
4
If having any queries related to the riser card,
please contact our local sales representative
or technical support team.
Slot Generation Mechanical Electrical Source
PCIE1 5.0 x16 x16 CPU0
PCIE2 5.0 x16 x16 CPU0
3
11 Install the PCIE Card (with a Riser Card)
System Panel (9-pin)
8Headers
Auxiliary Panel (18-pin) 9M.2 SSD Module Installation
2Move the stando based on the module type and
length.
3Peel o the yellow protective lm on the nut.
Hand tighten the stando into the desired
location.
Gently insert the M.2 module into the slot.
4
Tighten the screw with a screwdriver to secure
the module into place. Please do not overtighten
the screw.
5
2
1
AB
1Find the corresponding nut location to be used.
No. 1
Nut Location A
PCB Length 8cm
Module Type Type
2280
M2_1:
No. 2
Nut Location B
PCB Length 11cm
Module Type Type
22110
M2_2:
AB
AB
AB
AB 20o
NUT1NUT2B
GND
SMB_CLK
SMB_ALT#
CASEOPEN#
1
SMB_DATA
+3.3VSB
RSVD
RSVD
RSVD
RSVD
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED#
A
B
C
D
System Fault LED_P
E
GNDRESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
  • Page 1 1
  • Page 2 2

ASRock Rack SPC741D8HM3 Installation guide

ASRock Rack
Brand
ASRock Rack
Model
SPC741D8HM3
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents