ASRock Rack SP2C741D16X-2T Installation guide

ASRock Rack
Brand
ASRock Rack
Model
SP2C741D16X-2T
Category
Motherboards
Type
Installation guide
SP2C741D16X-2T
Quick Installation Guide
www.asrockrack.com SP2C741D16X-2T
2
P/N: 15G065287000AK V1.0
Motherboard Layout
The server board User's Manual is available for download from the ASRock Rack's ocial website
at http://www.asrockrack.com.
Take note of the following precautions before you install server board components or change any
server board settings.
1. Unplug the power cord from the wall socket before touching any components.
2. To avoid damaging the server board’s components due to static electricity, NEVER place your
server board directly on the carpet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle the components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-static pad or in the bag
that comes with the component.
5. When placing screws into the screw holes to secure the server board to the chassis, please do
not over-tighten the screws! Doing so may damage the server board.
*15G065287000AK*
Install the Server Board1
1Insert the server board into the chassis.
2Affix the screws clockwise into the
mounting holes in all of the corners of
the server board.
Do not over-tighten the screws
35.6 cm (14 in)
31.5 cm (12.4 in)
M2_1
CPU1
BAT1
SP2C741D16X-2T
UID1
VGA1
FAN4
IPMI_LAN
USB2.0 Ports
T: USB_2
B: USB_1
LAN2
LAN1
FAN3
FAN2 FAN1
USB3_1_2
COM1
ATX12V3
ATX12V4
ATXPWR1
MCIO2
PSU_SMB1
IPMB_1BMC_SMB_1BMC_SMB_2
SATA_SGPIO1
NMI_BTN1
ME_RECOVERY1
PASSWORD_CLEAR1
FLASH_OVERRIDE1
BIOS_OVERRIDE1
CPU0_HSBP1
MCIO1
PWM_CFG1
ATX12V2 ATX12V1
CPU1_HSBP1
DDR5_M1
DDR5_N1
DDR5_O1
DDR5_P1
DDR5_L1
DDR5_K1
DDR5_J1
DDR5_I1 DDR5_E1
DDR5_F1
DDR5_G1
DDR5_H1
DDR5_D1
DDR5_C1
DDR5_B1
DDR5_A1
CPU0
PANEL1
AUX_PANEL1
FAN5
FAN6
FAN7
FAN8
RAID_1
PCIE0
BIOS
ROM
BMC
ROM
TPM_BIOS_PH1
FRNT_VGA1
Dr. Debug
CLRMOS1
OCU1
Intel C741
NUT2280_1
SATA0
OCU2
OCU3
SATA_SGPIO2
PCIE2
PCIE3
PCIE4
PCIE5
PCIE6
NUT22110_1
PCIE1
ASPEED
AST2600
X710-AT2
16
14
15
17
810 11
912
13
18
21
22
23
24
25
26
27
28
29
30
31
32
33
34
3536
3738
39
404142
43
46
47
48
49
50
51
44
45
52
123 5
6
74
53
54
55
56
57
59
19
20
58
No. Description
1 Front VGA Header (FRNT_VGA1)
2 PSU SMBus Header (PSU_SMB1)
3 ATX 12V Power Connector (ATX12V2)
4Backplane PCI Express Hot-Plug Connector
(CPU1_HSBP1)
5Backplane PCI Express Hot-Plug Connector
(CPU0_HSBP1)
6 System Fan Connector (FAN2)
7 System Fan Connector (FAN1)
82 x 288-pin DDR5 DIMM Slots
(DDR5_N1, DDR5_P1)
92 x 288-pin DDR5 DIMM Slots
(DDR5_M1, DDR5_O1)
10 ATX Power Connector (ATXPWR1)
11 ATX 12V Power Connector (ATX12V1)
12 PWM Conguration Header (PWM_CFG1)
13 2 x 288-pin DDR5 DIMM Slots
(DDR5_B1, DDR5_D1)
14 2 x 288-pin DDR5 DIMM Slots
(DDR5_A1, DDR5_C1)
15 LGA 4677 CPU Socket (CPU0)
16 2 x 288-pin DDR5 DIMM Slots
(DDR5_E1, DDR5_G1)
17 2 x 288-pin DDR5 DIMM Slots
(DDR5_F1, DDR5_H1)
18 Mini Cool Edge IO Connector (MCIO2)
19 M-key M.2 Socket (M2_1) (Type 2280/22110)
20 Mini Cool Edge IO Connector (MCIO1)
21 OCuLink Connector (4 SATA 6Gb/s) (OCU3)
22 SATA Connector (SATA0)
23 OCuLink Connector (4 SATA 6Gb/s) (OCU2)
24 OCuLink Connector (4 SATA 6Gb/s) (OCU1)
25 System Fan Connector (FAN7)
26 System Fan Connector (FAN3)
27 System Fan Connector (FAN5)
28 System Fan Connector (FAN4)
29 System Fan Connector (FAN6)
30 USB 3.2 Gen1 Header (USB3_1_2)
31 System Fan Connector (FAN8)
32 ATX 12V Power Connector (ATX12V3)
33 ATX 12V Power Connector (ATX12V4)
34 Auxiliary Panel Header (AUX_PANEL1)
35 System Panel Header (PANEL1)
36 Virtual RAID On CPU Header (RAID_1)
37 BIOS Swap Override Jumper
(BIOS_OVERRIDE1)
38 Flash Override Jumper
(FLASH_OVERRIDE1)
39 SATA SGPIO Connector (SATA_SGPIO1)
40 Password Reset Jumper
(PASSWORD_CLEAR1)
41 SATA SGPIO Connector (SATA_SGPIO2)
42 ME Recovery Jumper (ME_RECOVERY1)
43 TPM-SPI Header (TPM_BIOS_PH1)
44 BMC SMBus Header (BMC_SMB_2)
No. Description
45 BMC SMBus Header (BMC_SMB_1)
46 Intelligent Platform Management Bus Header
(IPMB_1)
47 COM Header (COM1)
48 Clear CMOS Pad (CLRMOS1)
49 PCI Express 5.0 x16 Slot (PCIE0)
50 Non Maskable Interrupt Button
(NMI_BTN1)
51 PCI Express 5.0 x8 Slot (PCIE1)
52 PCI Express 5.0 x16 Slot (PCIE2)
53 PCI Express 5.0 x16 Slot (PCIE3)
54 PCI Express 5.0 x16 Slot (PCIE4)
55 PCI Express 5.0 x16 Slot (PCIE5)
56 PCI Express 5.0 x16 Slot (PCIE6)
57 2 x 288-pin DDR5 DIMM Slots
(DDR5_J1, DDR5_L1)
58 2 x 288-pin DDR5 DIMM Slots
(DDR5_I1, DDR5_K1)
59 LGA 4677 CPU Socket (CPU0)
I/O Panel3
3
4
125 6
No. Description No. Description
1VGA Port (VGA1) 4 10G LAN RJ-45 Port (LAN1)
2 USB 2.0 Ports (USB_1_2) 5 10G LAN RJ-45 Port (LAN2)
3 LAN RJ-45 Port (IPMI_LAN) 6 UID Switch (UID1)
SP2C741D16X-2T
Quick Installation Guide
www.asrockrack.com SP2C741D16X-2T
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
4
Remove the CPU socket cover and open
the socket lever.
Align and install the processor on the
carrier and make sure the arrow is located
in the correct direction. Close the socket
lever.
Carefully ip the carrier assembly. Apply
a thermal paste.
Install the heatsink to the CPU carrier.
en install the heatsink and CPU carrier
to the socket.
Install the Processor and Heatsink
1
2
CPU Carrier
Socket Dust Cover
3
4
6
5
180o
7
CPU Carrier
8
Socket
CPU Carrier
Heatsink
Tighten the corner fasteners. Secure
the heastink to the motherboard with a
screwdriver.
7Install the PCIE Card
1
Remove the bracket facing the slot that
you intend to use. Keep the screw for later
use.
2
Align the card connector with the slot and
press rmly until the card is completely
seated on the slot.
Fasten the card to the chassis with the
screw.
3
5LAN Port LED Indications
IPMI LAN Port Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or no
link
Blinking Yellow Data Activity Yellow 100Mbps connection
On Link Green 1Gbps connection
10G LAN Port Activity / Link LED Speed LED
Status Description Status Description
O No Link O 100Mbps connection or no
link
Blinking Yellow Data Activity Orange 1Gbps connection
On Link Green 10Gbps connection
9
10
6M.2 SSD Module Installation
System Panel Auxiliary Panel
9Headers
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
GND
BMC_SMBCLK1
BMC_Alert1_N
CASEOPEN#
1
SMB_SMBDATA1
+3VSB
P0_LED_0
LAN1_LINK_P
P1_LED_0
LAN2_LINK_P
+5VSB
GND
GND
LOCATORLED+
LOCATORLED-
LOCATORBTN#
System_Fault_LED_P
System_Fault_LED_N
SPI TPM Header 10 Install the Memory
123
Unlock a DIMM slot by
pressing the module clips
outward.
Insert the memory module. Lock the clips.
2Move the stando based on the module type and
length.
3Peel o the yellow protective lm on the nut.
Hand tighten the stando into the desired
location.
Gently insert the M.2 module into the slot.
4
Tighten the screw with a screwdriver to secure
the module into place. Please do not overtighten
the screw.
5
2
1
AB
1Find the corresponding nut location to be used.
AB
AB
AB
AB 20o
NUT1NUT2B
8 Jumper Settings
When the jumper cap is placed on the pins, the jumper
is “Short”. If no jumper cap is placed on the pins, the
jumper is “Open”.
e illustration shows a 3-pin jumper whose pin1 and
pin2 are “Short” when a jumper cap is placed on these 2
pins.
LAN Port
ACT/LINK LED
SPEED LED
LAN Port
ACT/LINK LED
SPEED LED
GND
SMB_CLK
SMB_Alert
CASEOPEN
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
System Fault LED-
AB
CD
System Fault LED+
E
1
SPI_DQ3
SPI_PWR
SPI_DQ2
SPI_CS0
Dummy
CLK
SPI_MISO
SPI_MOSI
GND
SPI_TPM_CS#
RST#
RSMRST#
TPM_PIRQ
No. 1 2
Nut Location A
(NUT2280_1)
B
(NUT22110_1)
PCB Length 8cm 11cm
Module Type Type2280 Type 22110
  • Page 1 1
  • Page 2 2

ASRock Rack SP2C741D16X-2T Installation guide

ASRock Rack
Brand
ASRock Rack
Model
SP2C741D16X-2T
Category
Motherboards
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents