EnviroLite EVTR2X4T3LED Installation guide

Type
Installation guide

EnviroLite EVTR2X4T3LED is an LED Troffer Light designed for simple installation in drop ceilings, providing bright and energy efficient illumination for commercial and residential spaces. With its slim profile and easy-to-assemble design, it's perfect for offices, schools, hospitals, retail stores, and more. The fixture features a durable construction, long-lasting LED technology, and a 3-year limited warranty for added peace of mind.

EnviroLite EVTR2X4T3LED is an LED Troffer Light designed for simple installation in drop ceilings, providing bright and energy efficient illumination for commercial and residential spaces. With its slim profile and easy-to-assemble design, it's perfect for offices, schools, hospitals, retail stores, and more. The fixture features a durable construction, long-lasting LED technology, and a 3-year limited warranty for added peace of mind.

INSTRUCTIONS MANUAL
LED BACKLIT TROFFER LIGHT
MODEL № EVTR2X4T3LED (UPC# 046335977303)
Page 1
Page 2
Thank you for purchasing this EnviroLite Troffer. This product has
been manufactured with the highest standards of safety and
quality.
FEATURES:
1. Easy to install.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local store, please call our Customer Service
Team at 1-800-787-1021. Please reference your Model No.
EVTR2X4T3LED or UPC (046335977303).
CAUTION:
1. Before starting installation of this fixture or removal of a previous
fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS. If you have any non-electrical questions
about this fixture, please call our Customer Service Team at 1-800-
787-1021. Please reference your Model No. EVTR2X4T3LED or UPC
(046335977303).
3. KEEP your receipt and these Instructions for Proof of Purchase.
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
Page 3
GENERAL:
1. All electrical connections must be in accordance with local, and
national electrical codes.
2. Prior to installation it is important to follow the following guidelines:
A. Turn off the main power at the circuit breaker before installing the
fixture, to prevent possible shock.
B. Be sure that all wires were not damaged during installation and
that there are no rough or sharp edges in contact with the wires.
1 ea LUMINAIRE
INSTALLATION & ASSEMBLY:
1. Remove fixture from box.
2. Open the door frame (#1) by rotating the two
cam latches (#2) [Fig. 1].
3. Remove the lamps (#3) from the packaging
material and put them in a safe place [Fig. 1].
4. Remove the wire cover (#4) by squeezing
and releasing it from locking tabs (#5) [Fig.
1].
5. Close the door frame (#1) and place the
fixture on a 2 ft by 4 ft T-bar grid in the
desired location [Fig. 2].
6. From above the ceiling, secure troffer to T-
Bar by bending built in T-bar clips (#6) on all
four corners of fixture [Fig. 3].
7. If local code requires, tie a wire to at least two
of the four T-bar clips (#6) to a structural
member of the ceiling.
8. Remove the access plate (#7) and locate
fixture supply wires (1 black & 1 white) [Fig.
3 & 4].
9. Remove one knockout (#8) in access plate
(#7) and pull fixture supply wires through
knockout (#8) opening [Fig. 4 & 5].
10. Make electrical connections according to
local code.
11. From below ceiling, open the door frame (#1)
and replace the wire cover (#4) by
squeezing it into the locking tabs (#5) [Fig.
1].
12. Install lamp (#3) with side labeled “power” on
the lamp holders closest to the access plate
(#7).
13. Close the door frame (#1) using the two cam
latches (#2) [Fig. 1].
14. Turn power on.
Page 4
3
Fig. 1
Fig. 3
Fig. 4
Fig. 2
Page 5
Possible Cause Corrective Action
1. Power is off. 1. Make sure power supply is on.
2. Lamps are not
installed correctly.
2. Ensure that the lamp side labeled "power"
is connected to the lamp holders on the side
closest to the access plate. If lights still do
not turn on, flip the lamp direction.
3. Faulty switch. 3. Test or replace switch.
4. Faulty wire connection. 4. Check wiring.
Fuse blows or circuit
breaker trips when light is
turned on.
1. Crossed wires or
power wire is grounding
out.
1. Check wire connections.
Light will not turn on.
TROUBLESHOOTING:
PRODUCT MAINTENANCE:
1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth
(use clean water, never a solvent) to wipe the surface of the fixture.
2. To clean the inside of the fixture, first disconnect power to the fixture by turning
off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or
slightly dampened clean cloth (use clean water, never a solvent) to wipe the
interior surface of the fixture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a
dry soft cloth to dust or wipe carefully.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of three (3) years from date of purchase. This warranty applies only to
the original consumer purchaser and only to products used in normal use and service. If this
product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion, provided that the product
has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or
mishandling. This warranty shall not apply to any product that is found to have been improperly
installed, set-up, or used in any way not in accordance with the instructions supplied with the
product. This warranty shall not apply to a failure of the product as a result of an accident, misuse,
abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material
or workmanship. This warranty shall not apply to the finish on any portion of the product, such as
surface and/or weathering, as this is considered normal wear and tear. The manufacturer does
not warrant and specially disclaims any warranty, whether expressed or implied, of fitness
for a particular purpose, other than the warranty contained herein. The manufacturer
specifically disclaims any liability and shall not be liable for any consequential or incidental
loss or damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
MANUAL DE INSTRUCCIONES
Page 6
LUMINARIA DE LED PARA TECHO SUSPENDIDO
MODELO № EVTR2X4T3LED (UPC# 046335977303)
MODE D’INSTALLATION
Page 11
MODÈLES EVTR2X4T3LED (CUP046335977303)
LUMIÈRE DEL POUR PLAFOND SUSPENDU
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

EnviroLite EVTR2X4T3LED Installation guide

Type
Installation guide

EnviroLite EVTR2X4T3LED is an LED Troffer Light designed for simple installation in drop ceilings, providing bright and energy efficient illumination for commercial and residential spaces. With its slim profile and easy-to-assemble design, it's perfect for offices, schools, hospitals, retail stores, and more. The fixture features a durable construction, long-lasting LED technology, and a 3-year limited warranty for added peace of mind.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI