Germanica GBV2400B User manual

Brand: Germanica

Model: GBV2400B

Category: Vacuum cleaners

Type: User manual

This manual is also suitable for

GBV2400R

INSTRUCTION MANUAL

Please read this manual carefully before using, and keep it for future reference.

2400W

CYCLONIC BAGLESS

VACUUM CLEANER

GBV2400R

General Safety 4

Unpacking 8

Product Overview 10

How to Use 11

Conecting suction hose to vacuum cleaner 11

Conecting suction hose to telescopic tube 11

Connecting an attachment 12

Cord rewind 12

airﬂow control 13

accessories 13

Cleaning and Maintenance 14

FAQs 18

Speciﬁcations 19

Customer Helpline Last Page

CONTENTS

Read this manual thoroughly before you start using the product.

The safety precautions instructions reduces the risk of ﬁre, electric shock and

injury when correctly complied to.

Please follow all instructions and take notice of all warnings.

IMPORTANT INFORMATION

GENERAL SAFETY

The lightning ﬂash with symbol within the

triangle is intended to warn you of a

non-insulated dangerous voltage in the

product’s enclosure that could be of

sucient magnitude to generate a risk of

electric shock to persons.

The exclamation point within the triangle

is intended to warn you to the presence

of important operating and maintenance

instructions in the documents included with

the product.

The lightning ﬂash symbol within the triangle is intended to warn you of

non-insulated dangerous voltage the product’s enclosure that could be of

sucient magnitude to generate a risk of electric shock to persons.

• Only using furniture that can safely support the Products.

• Ensure the Product is not overhanging the edge of the supporting furniture.

• Do not place the product on a high furniture without securing both the furniture

and the product to a stable support.

• Do not place the product on cloth or other conductive materials.

• Warn children of the dangers of climbing on furniture to reach its controls and

to call for an adult to assist.

IMPORTANT INFORMATION

The cover (or back) of the unit should not be

removed to prevent risk of electric shock. This

unit must be serviced by a qualiﬁed service

personnel only.

GENERAL SAFETY (Cont.)

• Before turning on, make sure your outlet voltage and circuit frequency

correspond to the voltage stated on the appliance rating label. If this is not the

case, do not use the appliance.

• Insert the plug ﬁrmly into an appropriate mains socket. Do not alter the plug.

Do not use an extension cord or electrical outlet with inadequate

current-carrying capacity.

• To protect against ﬁre and electric shock, do not immerse the cord, plug or

the appliance itself in water or other liquid. Ensure your hands are dry before

handling the plug or switching on the appliance. Do not use it outdoors or on

wet surfaces.

• Do not kink or damage the power cord. Do not wrap it around the appliance.

Do not pull or carry the vacuum cleaner by the cord. Do not use the cord as a

handle, close a door on the cord or pull the cord around sharp edges or

corners. Do not run the vacuum cleaner over the cord. Run the cord in such a

way that there will be no risk of anyone pulling it inadvertently or tripping over

it. Keep the cord away from heated surfaces.

• This vacuum cleaner is equipped with a plug and a power supply cord that

automatically retracts. If anything is damaged, both the plug and the cord

must be repaired by a qualiﬁed repairer or electrician. When unplugging, grab

the plug, do not pull the cord. Then press the cord retraction pedal and hold

the plug, guiding it back onto the cord reel to prevent whipping and causing

injury or damage.

• Always switch o the appliance ﬁrst and then unplug the cord from the outlet

when you have ﬁnished vacuuming, before connecting or changing accessories

and before emptying the dust tank or cleaning the appliance.

• Do not leave the vacuum cleaner unattended when plugged in.

WARNING!

ELECTRICAL SAFETY AND POWER CORD HANDLING

• Voltage: Make sure that your outlet voltage and circuit frequency

correspond to the voltage stated on the appliance rating plate.

• Power outlet: Connect the appliance to a properly earthed power outlet,

which must be easily accessible so that you can unplug it if necessary.

• Power cord: Do not kink or damage the power cord. Do not let it hang over

the edge of a table or benchtop, and do not let it touch hot or sharp surfaces.

Make sure the cord does not run under the vacuum cleaner.

• Electrical safety: Do not insert any objects into the appliance.

USAGE RESTICTIONS AND CONDITIONS

• This appliance is intended for indoor domestic use only. It is not suitable for

commercial, industrial or laboratory use.

• Do not use the appliance outdoors.

• The appliance is not intended to be operated by means of an external timer.

GENERAL SAFET (Cont.)

• Switch the appliance o and unplug it from the power supply after you have

ﬁnished using it and before cleaning, servicing, maintenance, or moving the

appliance. DO NOT pull the cord when disconnecting, grip the plug and pull it

gently out of the outlet.

• To reduce the risk of electrocution and other electrical hazards, do not immerse

the cord or plug in water, do not spill liquids onto the vacuum cleaner, and do

not operate it with wet hands.

• Do not use this appliance if it has a damaged cord or plug, if it is not working

properly, or if it has been damaged or dropped. If damaged, please contact our

support centre line - info@ayonz.com

• If the appliance and/or its cord are damaged, it must be replaced by the

manufacturer, its service agent or a similarly qualiﬁed person in order to avoid

a hazard. Do not attempt to repair, disassemble, or modify the appliance.

There are no user-serviceable parts inside this unit.

GENERAL SAFETY (Cont.)

• The appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction on the use

of the appliance by a person responsible for their safety.

• Supervise children to ensure they do not play with the appliance. Do not allow

children to clean the vacuum cleaner or perform user maintenance.

• Maintain the oven in a clean condition to avoid deterioration, which could

aect its working life and result in a hazard risk.

• We accept no liability for any eventual damages due to improper use, incorrect

handling or non compliance with these instructions.

This appliance is intended to be used in household and similar applications

such as:

– sta kitchen areas in shops, oces and other working environments;

– farm houses;

– by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments.

If the supply cord is damaged, it must be replace by the manufacturer, its service

agent or similarly qualiﬁed persons in order to avoid a hazard.

Before installing your appliance, read all safety instructions in this manual,

especially the sections on electrical safety and installation.

INSTALLATION

UNPACKING

• When unpacking the product, be sure to keep all the packaging materials

until you have made sure your new product is undamaged and in good

working order. This product has been packaging to protect itself

against transportation.

• Be sure to remove all packaging materials around the product and that

the plastic film used is also removed.

• CAUTION: Plastic wrapping can be a suffocation hazard for babies and young

children. Make sure all packaging materials are out of reach for children and

that they are disposed of correctly.

PRODUCT OVERVIEW

PRODUCT OVERVIEW (Cont.)

PET CLEANER ATTACHMENT

Used for pet hair of furniture,

floors, chairs, etc.

SETTING UP THE VACUUM CLEANER

CONNECTING THE SUCTION HOSE TO THE VACUUM CLEANER BODY

• Plug the suction hose into the suction hose connection at the front

of the vacuum cleaner. Push it in firmly until you hear it click into

place (A).

• To remove the suction hose, press the two catches on the side of the

suction hose (B ) and pull out the suction hose.

CONNECTING THE SUCTION HOSE TO THE TELESCOPIC TUBE

• To connect the suction hose to the

telescopic tube, slide the end of the

suction hose with the exhaust air

valve onto the end of the telescopic

tube with the wider diameter (C).

• To remove the suction hose from the

telescopic tube, simply pull off

the suction hose.

Make sure the vacuum cleaner is unplugged from the power outlet before

assembling or removing any accessories.

HOW TO USE

WARNING!

HOW TO USE (Cont.)

PULLING OUT THE TELESCOPIC TUBE

• Press the slider on the telescopic tube (D) in the direction shown by

the arrow and pull the telescopic tube out to the length you want.

• Let go of the slider and keep pulling out the telescopic tube until it

locks in place.

CONNECTING AN ATTACHMENT

• Select a nozzle attachment and plug it onto the end of the telescopic

tube with the narrower diameter.

• To change the nozzle attachment, pull off the nozzle attachment and

plug a new nozzle attachment onto the telescopic tube. The vacuum

cleaner comes with a floor brush, an upholstery nozzle and a crevice

nozzle with fold-out brush. Usage is explained on the following pages.

CORD REWIND

• Holding the power plug firmly, pull it to fully unwind the cord.

• Position the cord so no one is likely to trip over it.

• To rewind the power cord, press the cord retraction button.

Note: Take care, the cord retracts very quickly. Guide it with one hand

to prevent the cord from whipping, which could cause damage or injury.

HOW TO USE (Cont.)

AIRFLOW CONTROL

• To lower the airflow (suction power)

temporarily during vacuuming, push up

the suction control valve on the

curved handle.

• Push it down again to cover the opening

for increased suction (E).

UPHOLSTERY NOZZLE

Used for cleaning sofas,

lounge, chairs, car seats, etc.

2-IN-1 CREVICE NOZZLE

Used for cleaning upholstery, the car interior for all

little gaps that cannot be reach with other nozzles.

ACCESSORY HOLDER

Used to connect and hold your accessoring to the

telescopic tube of your vacuum cleaner.

- Flip over the top of nozzle following the arrow

direction marked on nozzle to switch between the

brush attachment.

CLEANING AND MAINTENANCE

STEP 1

Hold down the release button indicated on

(F) image. It will detach the dust tank from

the vacuum cleaner.

STEP 2

Hold the dust tank over a bin and press the

release button to open the bottom flap (G).

• Always unplug the vacuum from the power outlet before attempting to

clean any part of the vacuum or removing its contents/accessories.

• For optimum cleaning performance, clean the filters each time you

empty the dust tank.

• Only use the vacuum with the filter intact, in dry conditions.

WARNING!

CLEANING AND MAINTENANCE (CONT.)

STEP 3

You can remove the in-tank filter unit to clean

the product further. First locate arrows on the

dust tank (H).

STEP 4

When the intank filter is in place, the upper arrow

points towards the lower arrow and the closed

lock symbol (I).

STEP 5

To remove the in-tank filter unit, turn the dust lid

until the upper arrow points towards the lower

lower arrow OPEN lock symbol.

STEP 6

Clean the dust tank and filter with a damp cloth

and mild detergent, then wipe all parts dry

before putting it all back together.

CLEANING AND MAINTENANCE (CONT.)

STEP 7

Push up the latch on the dust tank lid and flip the

lid over to show the HEPA filter (see J. image).

STEP 9

Take the filters out over an open dustbin. Then clean the filters using a brush, if

necessary or wash the filters in cold or lukewarm water with a mild detergent. Do

not machine-wash the filters!

STEP 10

Allow the filters to air-dry completely before putting them into the in-tank

filter unit.

Close the dust tank lid. Make sure you hear the fastener clip lock in place.

STEP 8

Remove the HEPA Filter

(K) by pulling it out and

removing the foam filter

underneath (L).

As you now have the dust tank removed, you should also consider cleaning the

HEPA filter, which is located underneath the dust tank lid.

CLEANING THE HEPA FILTER

CLEANING AND MAINTENANCE (CONT.) CLEANING AND MAINTENANCE (CONT.)

STEP 11

Following the same procedure but

reverse, once assembling back the

dust bin with filters and locking the

dust canister and lid together by

making sure the uppser arrow is

pointing towards the lock logo.

Place the bottom of the dust bin

into the vacuum cleaner area it was

removed from, then click the Top

mechanism into place. See the (M)

image as reference.

CLEANING THE MOTOR FILTERS

The motor filters are located inside the

vacuum cleaner unit under the dust

tank area. (dust tank must be removed to

access).

1. Remove the small motor filter

(N, image #1) see right image.

- Clean the filter over a dust

bin by tapping on it.

2. Open the Filter Lid

(N. image #2) Remove the filter

located inside and hold over a bin

and tap the filter to remove he dust.

3. Once cleaned, place the filter back inside and close the Filter Lid (#2).

Insert the dust canister back into the vacuum cleaner as instructed at the top

of this page.

If experiencing issues with your oven and isn’t operating correctly please

check the following pages for solutions to the problems. If none of the solutions

offered help solve the problem with your appliance then please contact our

call centre on info@ayonz.com.

DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.

Never use the vacuum when the suction power is very weak. When this

occurs, switch off the vaccum cleaner and unplug it. Check if the dust

canister is full. Then check if any airways is jammed with rubbish or

debris, once removed turn vacuum back on to see if operated normally.

FAQS

PROBLEM POSSIBLE SOLUTION

VACUUM IS NOT

WORKING

Make sure that it is plugged in securely into the

power wall socket.

THE VACUUM CLEANER

WILL NOT PICKUP DIRT

AND HAS LOSS OF

SUCTION

- Make sure the dust canister is installed correctly.

- The dust tank is full, if so empty its contents.

- The filters are clogged, go through cleaning and

maintenance pages (page 11) to clean out all filters

and dust.

- Make sure the accessories such as the flexible

hose and attachments are installed correct and

are not blocked or cloggest with rubbish that has

been vacuumed.

DUST IS ESCAPING THE

VACUUM CLEANER

- The dust tank is full, please empty it.

- The dust tank is not installed correctly. Check to

ensure that the dust tank is clicked into place and

installed correctly.

- The filters are not installed correctly, follow the

cleaning and maintenance steps (page 11) to clean

the filters and remove and debris.

WARNING!

SPECIFICATIONS

Ratings 220-240V ~ 50/60Hz

2000W Norm. / 2400W Max.

Dimensions 450 (w) x 365 (d) x 800-1000 (h) mm

Weight Net: 6.1 kg / Gross: 7.1 kg

CUSTOMER HELPLINE:

info@ayonz.com

DISTRIBUTED BY:

Ayonz Pty Ltd

Germanica GBV2400B User manual

Brand: Germanica

Model: GBV2400B

Category: Vacuum cleaners

Type: User manual

This manual is also suitable for

GBV2400R

Download PDF

report

Germanica GBV2400B User manual

This manual is also suitable for

Germanica GBV2400B User manual

Related papers

Other documents