INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future reference.
General Safety 4
Unpacking 8
Product Overview 10
How to Use 11
Connecting suction hose to vacuum cleaner 11
Connecting suction hose to telescopic tube 11
Connecting an attachment 12
Cord rewind 12
Airflow control 13
Accessories 13
Cleaning and Maintenance 14
FAQs 15
Specifications Last Page
Customer Helpline Last Page
CONTENTS
4
Read this manual thoroughly before you start using the product.
The safety precautions instructions reduces the risk of fire, electric shock and
injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
IMPORTANT INFORMATION
GENERAL SAFETY
The lightning flash with symbol within the
triangle is intended to warn you of a
non-insulated dangerous voltage in the
product’s enclosure that could be of
sucient magnitude to generate a risk of
electric shock to persons.
The exclamation point within the triangle
is intended to warn you to the presence
of important operating and maintenance
instructions in the documents included with
the product.
The lightning flash symbol within the triangle is intended to warn you of
non-insulated dangerous voltage the product’s enclosure that could be of
sucient magnitude to generate a risk of electric shock to persons.
• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not place the product on a high furniture without securing both the furniture
and the product to a stable support.
• Do not place the product on cloth or other conductive materials.
IMPORTANT INFORMATION
The cover (or back) of the unit should not be
removed to prevent risk of electric shock. This
unit must be serviced by a qualified service
personnel only.
5
GENERAL SAFETY (Cont.)
• Before turning on, make sure your outlet voltage and circuit frequency
correspond to the voltage stated on the appliance rating label. If this is not the
case, do not use the appliance.
• Insert the plug firmly into an appropriate mains socket. Do not alter the plug.
Do not use an extension cord or electrical outlet with inadequate
current-carrying capacity.
• To protect against fire and electric shock, do not immerse the cord, plug or
the appliance itself in water or other liquid. Ensure your hands are dry before
handling the plug or switching on the appliance. Do not use it outdoors or on
wet surfaces.
• Do not kink or damage the power cord. Do not wrap it around the appliance.
Do not pull or carry the vacuum cleaner by the cord. Do not use the cord as a
handle, close a door on the cord or pull the cord around sharp edges or
corners. Do not run the vacuum cleaner over the cord. Run the cord in such a
way that there will be no risk of anyone pulling it inadvertently or tripping over
it. Keep the cord away from heated surfaces.
• This vacuum cleaner is equipped with a plug and a power supply cord that
automatically retracts. If anything is damaged, both the plug and the cord
must be repaired by a qualified repairer or electrician. When unplugging, grab
the plug, do not pull the cord. Then press the cord retraction pedal and hold
the plug, guiding it back onto the cord reel to prevent whipping and causing
injury or damage.
• Always switch o the appliance first and then unplug the cord from the outlet
when you have finished vacuuming, before connecting or changing accessories
and before emptying the dust tank or cleaning the appliance.
• Do not leave the vacuum cleaner unattended when plugged in.
6
WARNING!
ELECTRICAL SAFETY AND POWER CORD HANDLING
• Voltage: Make sure that your outlet voltage and circuit frequency
correspond to the voltage stated on the appliance rating plate.
• Power outlet: Connect the appliance to a properly earthed power outlet,
which must be easily accessible so that you can unplug it if necessary.
• Power cord: Do not kink or damage the power cord. Do not let it hang over
the edge of a table or benchtop, and do not let it touch hot or sharp surfaces.
Make sure the cord does not run under the vacuum cleaner.
• Electrical safety: Do not insert any objects into the appliance.
USAGE RESTRICTIONS AND CONDITIONS
• Do not use the appliance outdoors.
• The appliance is not intended to be operated by means of an external timer.
GENERAL SAFETY (Cont.)
• Switch the appliance o and unplug it from the power supply after you have
finished using it and before cleaning, servicing, maintenance, or moving the
appliance. DO NOT pull the cord when disconnecting, grip the plug and pull it
gently out of the outlet.
• To reduce the risk of electrocution and other electrical hazards, do not immerse
the cord or plug in water, do not spill liquids onto the vacuum cleaner, and do
not operate it with wet hands.
• Do not use this appliance if it has a damaged cord or plug, if it is not working
properly, or if it has been damaged or dropped. If damaged, please contact our
support centre line - info@ayonz.com
• If the appliance and/or its cord are damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in order to avoid
a hazard. Do not attempt to repair, disassemble, or modify the appliance.
There are no user-serviceable parts inside this unit.
7
GENERAL SAFETY (Cont.)
• The appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction on the use
of the appliance by a person responsible for their safety.
• Supervise children to ensure they do not play with the appliance. Do not allow
children to clean the vacuum cleaner or perform user maintenance.
• Maintain the oven in a clean condition to avoid deterioration, which could
aect its working life and result in a hazard risk.
• We accept no liability for any eventual damages due to improper use, incorrect
handling or non compliance with these instructions.
If the supply cord is damaged, it must be replace by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
8
Before installing your appliance, read all safety instructions in this manual,
especially the sections on electrical safety and installation.
INSTALLATION
UNPACKING
• When unpacking the product, be sure to keep all the packaging materials
until you have made sure your new product is undamaged and in good
working order. This product has been packaging to protect itself
against transportation.
• Be sure to remove all packaging materials around the product and that
the plastic film used is also removed.
• CAUTION: Plastic wrapping can be a suffocation hazard for babies and young
children. Make sure all packaging materials are out of reach for children and
that they are disposed of correctly.
9
PRODUCT OVERVIEW
10
PRODUCT OVERVIEW (Cont.)
11
BEFORE USING
SETUP
Please install the dust container gently by following the below process.
To remove it follow the opposite direction.
Make sure the vacuum cleaner is unplugged from the power outlet before
assembling or removing any accessories.
WARNING!
12
1. When the device is plugged in, the blue “--” display will be on,
and other lights will not be illuminated.
2. To start the product in low gear, touch the power button.
The wind speed key will light up.
3. Touch the wind speed button to display “02” in blue, For shy or
fearful cats, it is recommended to use 1-2 gears.
4. Touch the wind speed button again to display “03” in blue.
After touching the button three times, it will cycle through
01-02-03 and repeat.
5. To turn off the system, touch the power button.
The system will display “--” to indicate standby mode.
Make sure the vacuum cleaner is unplugged from the power outlet before
assembling or removing any accessories.
HOW TO USE
WARNING!
13
CLEAN DUST CUP
REMOVE THE DUST CUP
Remove the dust cup by lifting it
slightly in the direction of the arrow.
OPEN THE COVER AND POUR OUT
Push the clasp to open the dust cup
and pour out the dander.
PLACE THE DUST CUP
Install the dust cup in the direction
of the arrow.
CLEANING & MAINTENANCE
Note: When removing the dust cup, handle it with care and do so gently.
After emptying the dust cup, allow it to fully dry before reinstalling to
prevent any water from entering the motor and causing electric shock or
damage to the machine.
14
TRIMMER CLEANING
1. Please turn off the trimmer
before installing the knife.
2. Remove residual impurities
from the suction port.
3. Add lubricant to the tool head.
CLEANING & MAINTENANCE
15
If experiencing issues with your product and isn’t operating correctly please
check the following pages for solutions to the problems. If none of the solutions
offered help solve the problem with your appliance then please contact our
call centre on info@ayonz.com.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Never use the vacuum when the suction power is very weak. When this
occurs, switch off the vacuum cleaner and unplug it. Check if the dust
canister is full. Then check if any airways is jammed with rubbish or
debris, once removed turn vacuum back on to see if operated normally.
FAQS
PROBLEM POSSIBLE SOLUTION
VACUUM IS NOT
WORKING
Make sure that it is plugged in securely into the
power wall socket.
THE VACUUM CLEANER
WILL NOT PICKUP DIRT
AND HAS LOSS OF
SUCTION
- Make sure the dust canister is installed correctly.
- The dust tank is full, if so empty its contents.
- Make sure the accessories such as the flexible
hose and attachments are installed correct and
are not blocked or clogged with rubbish that has
been vacuumed.
DUST IS ESCAPING THE
VACUUM CLEANER
- The dust tank is full, please empty it.
- The dust tank is not installed correctly. Check to
ensure that the dust tank is clicked into place and
installed correctly.
WARNING!
SPECIFICATIONS
Ratings 220-240V ~ 50-60Hz, 350W
Dimensions 340 (w) x 140 (d) x 240 (h) mm
CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
