Ghent FPM1M164-187 User manual

Brand: Ghent

Model: FPM1M164-187

Type: User manual

(1)

Whiteboard

(1)

Vinyl Board

(2)

Leg

(4)

Glide

(1)

Cross Brace

(6)

End cap

(2)

Bracket

(2)

Acorn nut

10-24

(2)

10-24 x 1"

(8)

10-24 x 1-1/2"

(4)

10-32 x 1-1/4"

10-24 x 1" Screw

Acorn nut

A

DETAIL A

SCALE 1 : 5

Step 2:

Install the glides and end caps.

Fixed Partition (FPM1M1)

Instruction Sheet

Step 1:

Remove and unpack carton contents.

www.ghent.com/install - Lebanon, OH 800-543-0550 IS-FPM1M1 (3/20)

Step 3:

Install bracket onto legs using 10-32 x 1-1/4" screws, thread screws into bracket. Do not tighten.

Step 4:

Using a table (6) feet or more in length, organize the legs and cross brace as shown below,

hand tighten 10-24 x 1" screws with acorn nuts.

(PAGE 1 OF 2)

10-24 x 1-1/2" Screws

Note rivets

at top on

whiteboard

Note rivets

at bottom

on vinyl board

Step 5:

Install the vinyl board and the whiteboard as shown below.

4a. Align both boards flush with the cross brace. Check remaining screw holes to verify that the

boards are oriented properly.

4b. Use 10-24 x 1-1/2" screws to mount both panels onto the legs hand tight.

4c. Tighten all screws.

4d. Carefully remove the Fixed Partition unit from the table by carrying the legs. Then move to

the intended location.

www.ghent.com/install - Lebanon, OH 800-543-0550 IS-FPM1M1(3/20)

(PAGE 2 OF 2)

1
2

Ghent FPM1M164-187 User manual

Brand: Ghent

Model: FPM1M164-187

Type: User manual

Related papers

Other documents