Page is loading ...
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
service@seidal.com
www.seidal.com
KA916500TX METAL 5-TIER
CORNER ETAGERE
Assembly Instructions
ALEFT SIDE Frame Quantity
of 1
B RIGHT SIDE Frame Quantity
of 1
C BOTTOM Metal shelf Quantity
of 1
D. Fourth Metal shelf Quantity
of 1
E. Third Metal shelf Quantity
of 1
F. Second Metal shelf Quantity
of 1
G. Top Metal shelf Quantity
of 1
1.Long Bolt Quantity
of 1
1/4” X 1”
2.
Short Bolt
Quantity
of 15
1/4” X 3/8”
3．
．．
．Nut
Quantity
of 16
4．Allen Wrench Quantity
of 1
5．
．．
．Wrench Quantity
of 1
6．
．．
．Long screw Quantity
of 1
7．
．．
．Wall anchor Quantity
of 1
8．
．．
．Nylon restraint strap Quantity
of 1
9．
．．
．Wall brackets Quantity
of 1
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
METAL 5
-
TIER CORNER ETAGERE
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware. Do not return to store/retailer. crews shown in actual size. Using
a screw that is too long will cause damage. Before beginning assembly, separate each type of
screw. Carefully study the screw diagrams below (SHOWN ACTUAL SIZE). You may receive
extra hardware with your unit.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)
Figure 1
Assembly Instructions:
Push 1PC Left side frame into the
1PC Right side frame by hands.
Then Insert 1pc Long bolt (1)
through holes on Left side frame &
Right side frame (A & B) to
assemble the 2pcs Side Frames
(A&B) by tightening the Nut(3).
Insert 3pcs Short Bolt (2) through
holes on Iron of Bottom Metal
Shelf (C) & 2pcs side frame to
attach 2pcs side Frame (A & B) by
tightening the Nut(3).
The same way to assembled the
other shelf(G,F,E,D)
METAL 5-TIER CORNER ETAGERE
Assembly Instructions
Figure 2
Assembly Instructions:
When properly installed. this hardware
can provide protection against the
unexpected tipping of furniture.
Drill holes in wall, insert wall anchors(7)
into hole in wall.
Insert 1pc long wood screw(6) through
holes on Wall brackets(9) into wall
anchors(7) to attach wall brackets(9)
onto wall anchors(7).
Lace an end of the nylon restraint strap
(8) down through bracket. bring both
ends together and slide the beaded end
of the strap through the key hole
shaped slot on the other end. pull down
on the beaded end until it snap-locks
into the keyhole.
Check to make sure the
strap
is securely laced and
locked to the brackets.
Now, your Corner Etagere
is ready to use.
METAL 5
-
TIER CORNER ETAGERE
Assembly Instructions
Figure 3
Customer Service 1-800-633-5096
service@seidal.com
Southern Enterprises Inc.
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
KA916500TX
-
Parts Replacement Form
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern
Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If
this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation
to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.
Parts will be sent if available from SEI
We'd love to hear from you! Email us photos of our products in your home at sei@seidal.com
and we might feature it on our site or use it to model one of our inspirational photos.
/
