SEI Martinique HE4292R0TX Assembly Instructions Manual

HE4292R0TX

Martinique Entry

Bench/Storage

Assembly Instruction

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

[email protected]

www.seidal.com

Max weight capacity: 250 lbs.

Tool List: 3/16" drill bit, drill, tape measure and pencil

.

HE4292R0TX

Martinique Entry Bench/Storage

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage. Before beginning assembly,

separate each type of screw. Carefully study the screw diagrams below.

1

1pc

Seat Frame

2

1pc

Bottom Shelf Frame

3

1pc

Left Leg

4

1pc

Right Leg

5

2pcs

Back Leg

6

1pc

Back Panel

7

2pcs

Scroll

8

1pc

Back Top Frame

9

2pcs

Wooden Support Panel

10

1pc

Top Shelf

11

2pcs

Hook

12

1pc

Cushion Seat

A

14pcs

Screw 1/4″x5/8”

B

10pcs

Screw 1/4″x1-1/2”

C

2pcs

Screw 1/4″x1”

D

24pcs

Washer

E

4pcs

Screw ∮4mm x 3/4”

F

2pcs

Screw ∮4mm x 2”

G

2pcs

Plastic Anchor

H

2pcs

Screw ∮4mm x 1”

I

1pc

Wrench

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew the

finish on wood part. Avoid rubbing or scratching

the surface with rough or abrasive objects.

For replacement parts or questions, please

call Customer Service at 1-800-633-5096.Do

not return product to store. Please call

manufacturer for assistance, questions or

parts.

Assembly Tool Required

No.2 Phillips Screwdriver

HE4292R0TX

Martinique Entry Bench/Storage

Assembly Instructions

1 screw MUST BE directly

mounted into a wall stud. Wall

anchor is not needed when

mounting into a wall stud.

Step 1: Attach left leg (3),

right leg (4) to seat frame (1)

and bottom shelf frame (2) by

using screw (A), screw (B)

and washer (D) as shown.

Step 2: Attach back leg (5) to

seat frame (1) and bottom

shelf frame (2) by using screw

(B) and washer (D) as shown.

Inserting back panel (6) into

back leg (5) by using screw

(A), screw (B) and washer (D)

as shown.

Figure 1

Figure 2

Step 3: Attach back top frame

(8) to wooden support panel

(9) by using screw (B) &

washer (D) as shown.

Then attach it to top shelf (10)

by using screw (C), (H) as

shown.

Step 4: Inserting back top

frame (8) into back panel (6)

as shown.

Then attach hook (11) to back

panel (6) by using screw (A)

and washer (D) as shown.

Then attach scroll (7) to

seat

frame (1) and back panel (6)

by using screw (A) & washer

(D) as shown.

Figure 3

Figure 4

Step 5: Put cushion seat (12)

on the seat frame (1) and fix

by using screw (E) as shown.

Step 6: Locate the bench at a

comfortable place, measure

the wall and mark the width

and height as shown.

Measure the wall and mark

the location of the center of

each of wall mounting holes

as Figure 6 shown.

Using the level, make sure

that two marks are level on

the wall.

Using the power drill and

3/16″drill bit, drill two

3/16″holes on wall as shown.

Make sure not to drill into

electrical wiring or plumbing

pipes.

Figure 5

Figure 6

Drill two 3/16”

Holes into wall.

Step 7:

Insert plastic anchors

( G ) into the holes of wall as

shown. (When doing this, you

will need a hammer help you).

Using the phillips head

screwdriver, install screw (F) into

each of the anchors (G) as

shown.

G

F

8

F

G

Figure 7

Please immediately examine this product carefully. Any request for missing parts or damage replacement

must be received within 90 days of your receipt of the product. Replacement, if available, will be honored

within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend

modifying product(s) and we are not responsible for any damages due to product modification(s).

If

damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to

provide parts or replacement merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri

Central time if you have product issues or email us at service@seidal.com. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service

1-800-633-5096

[email protected]

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

SEI Martinique HE4292R0TX Assembly Instructions Manual

SEI Martinique HE4292R0TX Assembly Instructions Manual

Related papers

Other documents