SEI KA916000TX Assembly Instructions

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

KA916000TX

“MANILA” 3-DRAWER

KITCHEN STORAGE RACK

Assembly Instructions

A. Left side frame Quantity

of 1

B. Right side frame Quantity

of 1

C. Top Iron frame Quantity

of 1

D.Metal Tube Quantity

of 5

E. Bottom Metal Tube Quantity

of 2

F. Divider Tube Quantity

of 2

G. Bottom shelf frame

Quantity

of 1

H. Shelf frame Quantity

of 2

J. Wood panel Quantity

of 2

K. Wood top panel Quantity

of 1

L.Wicker basket frame Quantity

of 3

M.

Wicker bottom panel

Quantity

of 3

1．

．．

．Long Bolt Quantity

of 20

1/4”*1-1/4”

2.Short Wood screw Quantity

of 12

4.0*1/2”L

3．

．．

．Allen Wrench Quantity

of 1

4．

．．

．Wall brackets Quantity

of 2

5．

．．

．Wall anchor Quantity

of 2

6．

．．

．Nylon restraint strap Quantity

of 2

7.Long Wood screw Quantity

of 2

4.0*1”L

Care and Cleaning Instructions:

Before using , wipe with a clean , dry cloth. Avoid

rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

“

MANILA

”

3

-

DRAW

ER KITCHEN STORAGE RACK

Parts List

Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing

hardware. Do not return to store/retailer. Screws shown in actual size. Using a screw that is too long will

cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw

diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit.

Figure 1

Assembly Instructions:

Unpack and lay parts on clean,

padded surface like carpet or blanket.

Check that you have all parts

indicated on the front page

.

Please insert 2pcs Long bolt (1)

through holes on Side panel(A & B) to

attach 1pcTop Iron

frame

(C) to Side

frame(A & B).

Insert 18pcs Long bolt (1) through

holes on Side frame(A & B) to

connect 5pcs Metal Tube (D) & 2pcs

Divider Tube (F) & 2pcs Bottom Metal

Tube(E) to side frame (A & B).

Figure 2

Put 1pc wood top panel(K) onto the

side frame(A & B) & Top Iron

frame(C) & Metal Tube(D), Insert

4pcs Short Wood screw(2) through

holes on Top Iron frame(C) & Metal

Tube(D) to attach 1pc Wood top panel

(K) onto Iron frame(C) & Metal

Tube(D) by Tool Required No.2

Phillips Screwdriver (Not Included).

Put 2pcs wood panel(J) onto the

Metal Tube(D), Insert 8pcs short

Wood screw(2) through holes on

Metal Tube(D) to attach 2pcs Wood

panel (J) onto Metal Tube(D) by Tool

Required No.2 Phillips Screwdriver

(Not Included).

Place 1pc Bottom Shelf frame(G)

onto the Bottom Metal Tube(E).

Place 2pcs Shelf frame (H) onto the

inner frame of the rack to follow the

indication

“MANILA” 3-DRAWER KITCHEN STORAGE RACK

Assembly Instructions

Figure 3

Put the Wicker bottom panel (M) into

wicker basket (L) by hands

Then Put the complete baskets

onto Shelf-Frames(G & H)

Figure 4

When properly installed. this

hardware can provide protection

against the unexpected tipping of

furniture.

Drill 2pcs holes in wall, insert 2pcs

wall anchors(56) into hole in wall.

Insert 2pcs long wood screw(7)

through holes on Wall brackets(4)

into wall anchors(5) to attach wall

brackets(4) onto wall anchors(5).

Lace an end of the 2pcs nylon

restraint strap (6) down through

bracket. bring both ends together

and slide the beaded end of the strap

through the key hole shaped slot on

the other end. pull down on the

beaded end until it snap-locks into

the keyhole.

“MANILA” 3-DRAWER KITCHEN STORAGE RACK

Assembly Instructions

Ple

as

e

im

me

dia

tel

y

ex

am

ine

thi

s

pro

du

ct

car

efu

lly.

An

y

req

uest for missing parts or damage replacement must be received within 90 days of your receipt of the product.

Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully

assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to

product modification(s).

If damages or missing parts are not reported within 90 days of your receipt, we are under

no obligation to provide parts or replacement merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time

if you have product issues or email us at service@seidal.com. Please ask for customer service representative for

issues involving damages or replacement parts. Please ask for technical assistance representative for any issues

with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service 1-800-633-5096

[email protected]om

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

SEI KA916000TX Assembly Instructions

SEI KA916000TX Assembly Instructions

Related papers

Other documents