SEI KA916000TX Assembly Instructions

KA916000TX “MANILA”

3-DRAWER KITCHEN

STORAGE RACK

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

Assembly Instructions

[email protected]

www.seidal.com

A. Left side frame Quantity

of 1

B. Right side frame Quantity

of 1

C. Top Iron frame Quantity

of 1

D.Metal Tube Quantity

of 5

E. Bottom Metal Tube Quantity

of 2

F. Divider Tube Quantity

of 2

G. Bottom shelf frame Quantity

of 1

H. Shelf frame Quantity

of 2

J. Wood panel Quantity

of 2

K. Wood top panel Quantity

of 1

L. Rattan basket frame Quantity

of 3

M. Rattan bottom panel Quantity

of 3

1．Long Bolt Quantity

of 20

2．Bolt Quantity

of 12

3.Short Wood screw Quantity

of 12

1/2”L

4．Allen Wrench Quantity

of 1

5．Wall brackets Quantity

of 2

6．Wall anchor Quantity

of 2

7．Nylon restraint strap Quantity

of 2

8.Long Wood screw Quantity

of 2

1”L

Care and Cleaning Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish . Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or

Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

“

MANIL

A

” 3-DRAWER KITCHEN STORAGE RACK

Parts List

Please review all parts and hardware before disposing of any packaging. Call Customer

Service if missing hardware. Do not return to store/retailer. Screws shown in actual size.

Using a screw that is too long will cause damage. Before beginning assembly, separate each

type of screw. Carefully study the screw diagrams below (SHOWN ACTUAL SIZE). You may

receive extra hardware with your unit.

Figure 1

Assembly Instructions:

Unpack and lay parts on clean, padded

surface like carpet or blanket. Check that

you have all parts indicated on the front

page

.

Please insert 2pcs Long bolt (1) through

holes on Side panel(A & B) to attach

1pcTop Iron

frame (C) to Side frame(A &

B).

Insert 18pcs Long bolt (1) through holes

on Side frame(A & B) to connect 5pcs

Metal Tube (D) & 2pcs Divider Tube (F) &

2pcs Bottom Metal Tube(E) to side frame

(A & B).

Figure 2

Put 1pc wood top panel(K) onto the side

frame(A & B) & Top Iron frame(C) & Metal

Tube(D), Insert 4pcs Short Wood screw(3)

through holes on Top Iron frame(C) &

Metal Tube(D) to attach 1pc Wood top

panel (K) onto op Iron frame(C) & Metal

Tube(D) by Tool Required No.2 Phillips

Screwdriver (Not Included).

Put 2pcs wood panel(j) onto the Metal

Tube(D), Insert 8pcs short Wood screw(3)

through holes on Metal Tube(D) to attach

2pcs Wood panel (j) onto Metal Tube(D) by

Tool Required No.2 Phillips Screwdriver

(Not Included).

Place 1pc Bottom Shelf frame(G) onto

the Bottom Metal Tube(E).

Place 2pcs Shelf frame (H) onto the inner

frame of the rack to follow the indication

“MANILA” 3-DRAWER KITCHEN STORAGE RACK

Assembly Instructions

Figure 3

Put the rattan bottom panel (M) into rattan

basket (L), tighten them with Bolt (2) by

Tool Required No.2 Phillips

Screwdriver (Not Included).

“MANILA” 3-DRAWER KITCHEN STORAGE RACK

Assembly Instructions

Put the finished baskets（L&M） into rack

Figure 4

When properly installed. this hardware can

provide protection against the unexpected

tipping of furniture.

Drill 2pcs holes in wall, insert 2pcs wall

anchors(6) into hole in wall.

Insert 2pcs long wood screw(8) through

holes on Wall brackets(5) into wall

anchors(6) to attach wall brackets(5) onto

wall anchors(6).

Lace an end of the 2pcs nylon restraint

strap (7) down through bracket. bring both

ends together and slide the beaded end of

the strap through the key hole shaped slot

on the other end. pull down on the beaded

end until it snap-locks into the keyhole.

We'd love to hear from you! Email us photos of our products in your home at

[email protected] and

we might feature it on our site or use it to model one of our inspirational photos.

Customer Service 1-800-633-5096

[email protected]

Southern Enterprises Inc.

2915 Merrell Road

Dallas, Texas 75229

Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts. Southern

Enterprises Inc. will provide replacement parts for only those items purchased within the last 9 months. If this

product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to

provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled.

Parts will be sent if available from SEI

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

KA916000TX - Parts Replacement Form

SEI KA916000TX Assembly Instructions

SEI KA916000TX Assembly Instructions

Related papers

Other documents