Figure 1
Assembly Instructions: Unpack
and lay parts on clean, padded
surface like carpet or blanket.
Check that you have all parts
indicated on the front page.
Insert Bolts(1) through holes on
Bottom Back Panel(A) to attach
both Bottom Side Panels(B,C).
Insert Short Bolts(2) through
holes on both Bottom Side Panels
(B,C) to attach Bottom Back
Panel(A), using Wrench(3).
Insert 16pcs Bolts(1) through
holes on both Bottom Side
Panels(B,C) to attach 3pcs Shelf
Frame(D) & 1pc wire shelf(E),
using Wrench(3).
Figure 2
Use Short Bolts(2) to attach
Upper Back Panel(D) to Bottom
Back panel(A). Tighten using
Wrench (3).
Attach both Upper Side Panels
(E,F) to both Bottom Side Panels
(B,C) using 6pcs Bolts(1) and
2pcs Short Bolts(2). Tighten
using Wrench(3).
Insert 10pcs Bolts(1) through
holes on both Upper Side
Panels(E,F) to attach 1pc Top wire
Shelf(J) and 1pc Small Wire
Shelf(K). Tighten using
Wrench(3).
KITCHEN STORAGE TOWER