Extron Hideaway HSA 300 User guide

Type
User guide
ARCHITECTURAL CONNECTIVITY
PRODUCT GUIDE
The Global Perspective
Audio-Visual communications is a global, multi-billion dollar industry. While North America remains the single largest
market segment, its relative size is diminishing each year as rapidly emerging markets in Europe, the Middle East, and Asia
demonstrate significant rates of growth. Large, multi-national corporations are now commonplace, with work occurring
around the clock. Whether it’s a bank in London, stock brokerage in New York, financial services provider in Dubai, or
customer support center in Bangalore, communication and AV presentation needs are largely the same: some form of
information or key corporate message must be communicated effectively in order for the organization to achieve a particular
set of results. Far from reducing the need for group presentation settings, the proliferation of mobile devices adds a new
level of complexity for the AV professional, putting ever greater demands on the communication infrastructure.
Despite the similarity in AV system needs around the globe, local standards and practices present unique challenges for the
AV consultants, system designers, resellers, and integrators who work in this dynamic international market. Take ACpower,
for example. There are two primary ACpower standards worldwide: 110/120 volts, 60Hz, and 220/240 volts, 50Hz; yet
there are more than a dozen different ACpower outlets in use. From there, wiring installation standards vary from country
to country. In some cases, major metropolitan areas, such as the city of Chicago, may have their own regulations and
installation requirements.
Building construction practices also vary widely internationally. In North America, suspended ceilings are the norm in
commercial structures. Walls are typically hollow, with gypsum board mounted to metal studs, allowing electrical, data,
and AV cables to be run within the wall. In other markets, hard-deck ceilings and solid walls may call for the use of surface-
mounted cable raceways for power, data, and AV.
As a leading manufacturer of AV infrastructure products, Extron offers the industry’s largest assortment of ceiling mount,
furniture mount, wall mount, and floor mount devices designed for use in major markets around the world. We recognize
that not all products are appropriate for all markets. For AV professionals facing a global marketplace, however, it’s vital
to provide you with a global perspective. Along with products that meet universal AV system integration needs, within
this Product Guide you’ll also find AC power outlets, mounting conventions, and form factors that address the unique
requirements of specific world markets. For additional information on an Extron product that’s not commonly utilized in
your home market, Extron resources are always available. Simply contact your local Extron sales or technical support
representative, or visit www.Extron.com.
www.extron.com 1
TABLE OF CONTENTS
Architectural Connectivity Guide for Professional AV Systems
Introduction to Architectural Products ............................................ 2
Connectivity................................................................. 4
Furniture Mount Architectural Products ........................................... 6
Application: Furniture Solutions in a Meeting Room ................................. 8
Furniture Enclosures: Permanent Solutions ........................................ 9
Furniture Enclosures: Temporary Solutions ....................................... 15
Wall Mount Solutions......................................................... 16
Input Connector Types ....................................................... 17
AC Outlets ................................................................. 18
Form Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Modular Wall Mount Connectivity............................................... 21
Customizable Connectivity Formats ............................................. 22
Applications Examples: Modular Wall Mount ...................................... 23
Wall Boxes ................................................................. 24
Floor Mount Solutions ........................................................ 25
Extron Architectural Connectivity Solutions
Architectural Enclosures ....................................................... 28
Table Mount Kits ............................................................ 41
Architectural Connectivity ..................................................... 43
Wall Connectivity ............................................................ 75
Extenders & Line Drivers...................................................... 80
Fiber Optic Transmitters & Receivers ............................................ 83
USB Products .............................................................. 84
2 Extron Architectural Connectivity Guide
INTRODUCTION TO
ARCHITECTURAL CONNECTIVITY
In a typical AV system, key components such as audio processors,
scalers, and matrix switchers are invisible to the user, often
mounted in an AV rack or inside a dedicated AV/IT room.
An AV system often needs accessible control and connection points
for operating the system and connecting local sources. These
devices might be the only components in an AV system that end
users actually see. It may be mounted in or on a wall, at a table, in a
credenza or lectern, or hidden in the floor. These components must
be reliable and durable, yet blend in with the environment. Extron
recognized the need for aesthetically pleasing AV interfaces more
than three decades ago when we introduced our first architectural
connectivity products. Since then, we have created an unmatched,
diverse portfolio of architectural connectivity products. They blend
seamlessly into any environment while contributing to overall system
WALL
Connectivity and control
products ideal for mounting
on walls or similar at
surfaces
FURNITURE
Surface access enclosures
and control products for
ush-mount or table-top
applications
FLOOR
Low prole, surface-mount
raceways and connectivity
for third-party oor boxes
reliability and ease of use - whether powering up a projector through
a wall-mounted control panel or connecting a laptop or mobile
device to an interface panel mounted in a conference room table.
FIXED AND MODULAR ARCHITECTURE
Extron architectural connectivity solutions are available as fixed,
preconfigured panels and plates that are ready to install and
use. Extron also offers hundreds of AAPs – Architectural Adapter
Plates, MAAPs – Mini Architectural Adapter Plates, and Flex55
modules that combine with architectural mounting products to
allow for highly customized AV, network, and control solutions.
These products must meet the aesthetic approval of the
customer, the technical requirements of the system, and
conform to local electrical and accessibility regulations.
www.extron.com 3
GLOBAL COMPATIBILITY
Electrical and building codes differ from one locale to another.
Junction box form factors also vary from region to region.
Regional guidelines for accessibility are another consideration for
products installed in open spaces. Even aesthetic preferences
change from country to country. To accommodate these
varying world standards and design preferences, Extron
architectural products comply with local regulations as well as
regional design preferences to ensure our products are not
only safe but also harmoniously match the local décor.
Extron Architectural Products are organized in this guide by the
type of surface into which they are integrated or mounted:
• Furniture
• Wall
Floor
PURPOSE OF THIS GUIDE
This guide provides a technical overview of Extron’s architectural
solutions and configuration tools, as well as a product catalog.
Each section details the solutions, benefits, and, when relevant,
technical considerations for each product category. Here
are some topics to keep in mind as you read this guide:
• Extron offers an extensive selection of high quality connectivity
products for professional environments that make our
Architectural solutions an integral part of your AV system design
• Extron’s architectural solutions are proven technology and
deliver unsurpassed product quality, customer usability,
installation efficiency, and range of functionality
• When registered as an Extron Insider, you have access to
our online configuration tools, which are essential tools
for AV technicians, integrators, and consultants to aid in
system design and the education of the end user
4 Extron Architectural Connectivity Guide
Control
Network Video
Power/Charging
Extron
Connectivity
Solutions
Audio
Connectivity
CONNECTING TO THE AV SYSTEM
A well-designed and integrated AV system blends seamlessly into a
room. Upon first glance, it may not be apparent that an Audio/Video -
AV system is installed. When you have a closer look, you may notice
some key indicators; a display on the wall, a projector on the ceiling,
or a laptop connection cable at a table.
To simplify the integrator's challenge of designing a “hidden in
plain sight”, yet functional AV system, Extron offers hundreds of
architectural connectivity products that maintain a clean and efficient
system design. These products provide connection points for video,
audio, data, and power, all the while blending in with the sleek design
of a modern business or learning facility.
Extron connectivity solutions are available
for a variety of signal types and functions.
Extron solutions are designed to accommodate a variety of surfaces and locations, including furniture, in-wall, on-wall, or floors.
Floorbox
Solutions
Wall Solutions
Wall Plates - Fixed
Furniture/Table Mount Solutions
Wall Solution
Wall Plate Modular
www.extron.com 5
6 Extron Architectural Connectivity Guide
Without lid With customized lid
Furniture Mount Architectural Products
CONNECTIVITY IN FURNITURE
Furniture-mount architectural products place AV connectivity, AC or
USB power, and control at the user’s fingertips by locating them in
or under a conference room table, lectern, or other surface. Extron
furniture-mount architectural products range from CableCubby
®
cable access enclosures, the AV industry’s “gold standard” for
conference table connectivity, to a complete line of unique, under-
table mounting brackets and shelf systems for discreet and
convenient mounting of AV system electronics beneath the furniture
surface.
PERMANENT INSTALLATION
Installing furniture-mounted architectural products directly in or
under the furniture produces the cleanest, most elegant results. This
generally requires cutting or drilling into the furniture surface, creating
a fixed, permanent solution.
One connectivity solution which can be mounted into a tabletop or
other surface for access to cables and AV connection points is the
Extron Cable Cubby Series of enclosures. They allow cables and
connections to be stored out of sight when not in use by providing a
lid to hide the contents of the enclosure.
The HSA Hideaway
®
Surface Access Enclosure series is another
compact AV connectivity solution that installs directly into a furniture
surface. It offers both tilt-up and vertical lift options and is available
with preconfigured or customizable connectivity.
TEMPORARY INSTALLATION
While it is aesthetically pleasing to have connectivity solutions installed
directly into furniture, permanently modifying a lectern or table surface
may not always be practical. When the purpose of the room may
change from day to day, or when modification to the furniture surface
is impractical or impossible, Extron offers a variety of non-intrusive,
removable AV connectivity solutions.
SPECIALIZED FURNITURE APPLICATIONS
Some professional environments may incorporate furniture that
features exotic woods or other luxurious materials. To keep
these surfaces visually streamlined while still providing access
to AV connectivity and power solutions, Extron has introduced
the Cable Cubby 650 UT under-table access enclosure. This
unique, open-access design allows use of a professionally-
fabricated access cover, rendering the Cable Cubby 650 UT
nearly invisible when not in use.
www.extron.com 7
8 Extron Architectural Connectivity Guide
Application: Furniture Solutions in a Meeting Room
For preconfigured AV connectivity and AC or USB
power at the table, an HSA Hideaway
®
Surface
Access Enclosure can be installed directly into the
surface and is virtually flush when closed.
For semi-permanent installations or when cutting the
surface is not permitted, SMB210 Series Surface
Mount Boxes can be installed at the table edge.
Cable Cubby products provide configurable
AV connectivity and power at tables, desks,
and other space-constrained furniture.
Two CableCubby650UT enclosures ganged
together and without a matching lid are mounted
under the table.
www.extron.com 9
Furniture Enclosures: Permanent Solutions
CABLE CUBBY SERIES/2
When an application requires an elegant cable management solution
for permanent installation in a meeting table, lectern, or other surface,
Extron Cable Cubby enclosures can be a perfect solution. Cable
Cubby enclosures blend seamlessly into aesthetically sensitive, high-
profile surroundings, mounting nearly flush with the tabletop when not
in use.
Extron offers a variety of cable management products for the
CableCubby series that simplify and minimize the visibility of cables,
including cable pass-through plates, or the Extron Retractor Series/2
cable retraction modules with CableCover™ under-table cable bag
for improved aesthetics. AV, power, and data cables are securely
installed in each Cable Cubby to prevent loss and keep them hidden
from sight until needed.
In addition to AV connectivity, Cable Cubby enclosures support AC
and AC+USB power modules, providing tabletop power for laptops
and mobile devices throughout the duration of the longest meetings
or training sessions. Extron offers the AV industry’s only complete line
of AC power modules, with outlets available for all world markets.
FLEXIBLE OPERATION WITH SIMPLIFIED SERVICE
AND MAINTENANCE
The versatile Cable Cubby Series/2 enclosures are engineered for
fast assembly and installation on the job site. A simple, elegant,
integrated clamping system secures the enclosure to the furniture
surface without the need for tools or additional parts. The enclosures
are also equipped with lid dampers for smooth, quiet operation.
After installation, the patented modular design allows the convenient
installation or replacement of AV cables or AAPs from the top of the
enclosure.
Cable Cubby 100 Cable Cubby 202 Cable Cubby 500 Cable Cubby 700 Cable Cubby 1202 Cable Cubby 1402 Cable Cubby 650 UT
SELECTION
Cable Cubby Series/2 enclosures are available in a variety of shapes, sizes, and finishes to accommodate any environment and surface type:
10 Extron Architectural Connectivity Guide
Furniture Enclosures: Permanent Solutions
Cable Pass-through
AAP Connectivity
Retractors
Cable Cubby 700
Black Anodized
Cable Cubby 700
Brushed Aluminum
Control + Cable Pass-through
COLOR/FINISH
Most Extron Cable Cubby Series/2
enclosures are available in black anodized or
brushed aluminum finishes.
APPEARANCE
Most models require no special surface
preparation for installation, making
installation simple and cost effective. The
surrounding bezel provides a clean and
professional finish for nearly any surface.
FOOTPRINT OF THE ENCLOSURE
Efficient use of space is a key factor when
considering a cable access enclosure for
a table. An enclosure’s footprint should be
kept as small as possible while providing
the maximum connectivity within the space
it occupies. The best CableCubbySeries/2
enclosure for a given application is
determined by the required connectivity,
power, or control.
Many Cable Cubby enclosures can be customized to support a variety of connectivity plates
and cabling management systems. Here are some examples of different configurations, in one
enclosure type:
www.extron.com 11
POWER MODULES
Extron has a selection of power modules for use with
CableCubbySeries/2 enclosures that accommodate AC plugs for
most geographical regions. Modules are available with AC power
or AC plus USB power for convenient powering of devices such as
mobile phones or tablets.
CONNECTIVITY PLATES
Extron has a selection of connectivity plates for CableCubbySeries/2
for AV, data and power connectivity. These solutions, called AAP
®
– Architectural Adapter Connectivity Plates, allow pass-through of
signals when used with existing cables.
AAP OR CABLE PASS-THROUGH MODULES
Cable pass-through modules are an alternative which makes it
possible to have the AV and data cables stored safely within the
enclosure and ready for use. The Cable Pass-through plates consist
of one-piece, split-ring plastic, allowing for the easy installation or
removal of cables.
INSTALLATION CONSIDERATIONS: EXTRON CABLES
Extron Ultra Series cables are engineered with Extron-
exclusive ultra-flexible cable, features a low-bend radius, and
compact connectors. They are ideal for applications with tight
equipment racks, AV presentation furniture, or applications
with wall-mount or pole-mount displays. Depending on the
length of the cable, Ultra Series cables conform to Premium
High Speed or High-Speed HDMI Cable performance
standards and support resolutions up to 4K, 4096x2160.
Available Ultra Series Cables:
• HDMI Ultra Series
• DisplayPort Ultra Series
• DVID SL Ultra Series
12 Extron Architectural Connectivity Guide
RETRACTORS
A tangle of cables and loose adapters strewn across a conference
room or board room table detracts from the aesthetics of the
environment. The Extron Retractor Series/2 is a durable and easy-
to-use cable retraction system for professional environments that
provides an elegant cable management solution. A video, power, or
data cable is pulled easily from the enclosure, and connected to a
laptop, tablet, or other device. When finished, the cable is retracted
with the simple press of a button and hidden out of sight.
When used in small or medium-size furniture, the Retractor is useful
with its threefeet (90cm) cable extension. For bigger furniture and
meeting tables, the Retractor XL models, capable of extending the
cable up to fivefeet (152cm), is a more suitable choice. In addition
to vertical mounting in a Cable Cubby enclosure, Retractors can be
mounted horizontally underneath a table using the TMK 120 D Table
Mount.
RETRACTOR SERIES/2 QUALITY
The unique, patented cable retracting “pulley” design of the
RetractorSeries/2 is tested to exceed 7,500cable extension and
retraction cycles. This means each retractor delivers consistent
mechanical operation and signal quality that can be relied upon for
years of problem-free operation. Installation of it ensures both a
positive user experience as well as a positive return-on-investment.
EASY ACCESS TO YOUR CABLE CONNECTOR
TAKE CONNECTOR AND PULL STOP AT ANY DESIRED LENGTH HOLD CONNECTOR AND PUSH RELEASE BUTTON,
TO STORE CABLE BACK IN THE ENCLOSURE
VIDEO
Furniture Enclosures: Permanent Solutions
www.extron.com 13
CABLECOVER
The Extron CableCover is an under-table cable bag for improved
cable management and aesthetics. When used with pass-through
cables installed in a Cable Cubby or AVEdge
TM
architectural
enclosure, the CableCover minimizes cable tangles and prevents
accidental disconnections. It is also an excellent solution for covering
RetractorSeries/2 mechanisms.
CABLE COLLAR
Cable Collars provides color coding for easy visual identification,
and improve access to the connector, making it is easier to pull
out. CableCollars can be used with select Extron cables and cable
retraction systems.
CABLE CUBBY BUILDER
The Extron Cable Cubby Builder is an interactive online tool for
designing and customizing Cable Cubby Series/2 cable access
enclosures. After selecting the Cable Cubby enclosures and finish,
an intuitive drag-and-drop interface makes it easy for users to add
power, cables, Retractors, AAPs, and installation accessories. It
automatically assembles a Bill of Materials, and gives users an
opportunity to review their configuration and make any last-minute
changes before placing an order.
FINISH SELECTOR
The Extron Finish Selector enables users to quickly see which
available architectural product finish, black anodized or brushed
aluminum, works best with a particular wood tone or laminate
surface. Product finish and surface material selections are
independent, allowing the user to either view the product finish
against a wood tone or to vary wood tones around a product finish.
AUTOCAD BLOCK DIAGRAMS
In response to requests by architects, consultants, designers,
engineers, and integrators in the AV industry, AutoCAD
®
block
diagrams of over 500 Extron products are now available online.
These downloadable files make incorporating Extron products into
AutoCAD-based engineering drawings quick and easy. The block
diagrams include the following:
• Product name
• Part number
• Graphical representation of input and output connector types
• A single point for connection of each input and output on
each product
The block diagrams and panel drawings are available for download
in various formats, including DWG, DWF, and PDF. You will need
AutoCAD or you can download the free Autodesk Design Review
program from extron.com.
CONNECTIVITY CONFIGURATOR
The Extron Connectivity Configurator is an easy-to-use, interactive
online tool for designing custom architectural connectivity solutions
for AV systems that incorporate HSA Hideaway Surface Access
Enclosures, table, rack, and wall mounts, and other Extron
architectural mounting solutions. It presents all currently available
Extron AAPs, MAAPs, decorator-style modules, Retractors, and
associated mounting frames. With this intuitive interface, users can
sort through Retractor modules and dozens of AAPs or MAAPs
by signal or connector type. Simply drag-and-drop selections into
the desired mount and change hardware colors, if needed. When
complete, a summary of the order is ready for printing, complete with
an image of each individual configuration. Available connector plates
can be sorted by signal or connector type for fast configuration.
14 Extron Architectural Connectivity Guide
Furniture Enclosures: Permanent Solutions
HSA
When an application requires a small, rugged, and reliable enclosure,
and only connections are needed, the HSA Series enclosures are
designed for easy mounting into tables, desks, or other AV furniture.
The top can be opened with a simple push, gently opening the unit
in a smooth, pneumatic motion. Pressing down on the unit closes
it, where it is held securely in place with a mechanical latching
mechanism.
The HSA 300 enclosure has a pre-selected combination of AC power
and selected connectivity options. The HSA400, HSA402, and
HSA822 support the customization of connectivity options with a
wide selection of AAP plates.
Once installed, the HSA unit fits nearly flush with the surface, storing
interface connectors out of sight.
ONLINE TOOLS
HSA CONNECTIVITY
CONFIGURATOR
The Connectivity
Configurator is an Intuitive
online tool that facilitates
connectivity selection for
HSA400, HSA402, and
HSA822 enclosures. It provides pricing as well as a front-view of the
completed configuration.
The configuration and picture can be saved as a PDF file or
Excelspreadsheet, making it easy to share with customers.
For more information, refer to the section entitled Connectivity
Configurator.
HSA 300
Fixed AC+USB Power,
HDMI, VGA + Audio,
Network
HSA 400
Fixed AC Power and 2x
Network. Flexibility with
AAP plates
HSA 402
Fixed 2x AC Power and 4x
Network. Flexibility with
AAP plates
HSA 822
Fixed 2x AC Power and 4x
Network. Flexibility with
AAP plates
www.extron.com 15
Furniture Enclosures: Temporary Solutions
SURFACE MOUNT BOX
When the purpose of a room may change, or if it is not practical
to perform a permanent modification to a furniture surface, Extron
Surface Mount Box - SMB enclosures can be fastened temporarily to
a surface and easily removed when necessary.
SMBs are designed for the external mounting of almost all Extron
architectural products:
• Wallplates
AAP - Architectural Adapter Plates
Flex55 compatible modules
• MediaLink
®
Controllers
• TouchLink
®
and TouchLinkPro Touchpanels
SURFACE MOUNT PRODUCTS
AVEDGE
For temporary applications requiring integrated AV cabling, the Extron
AVEdge offers a practical solution. It can be mounted on the edge of
a table, and is compatible with Extron connectivity plates, AV cables,
and Extron Retractor Series/2 modules.
AVEDGE BUILDER
The Extron AVEdge Builder is an interactive online tool for designing
and customizing AVEdge enclosures with AV connectivity and power.
The builder presents all available options for AC or USB power,
cables, Retractors, AAPs, and optional accessories. An intuitive drag-
and-drop interface makes it easy to apply changes on the fly and
print a summary with an image of each configuration. The AVEdge
Builder automatically assembles a Bill of Materials, and gives the
user a chance to review their configuration and make any last-minute
changes before placing an order.
SMB 110 SeriesSMB 210 Series
With optional Table Clamp
In Black and White
SMB1
For TouchLink touchpanel
16 Extron Architectural Connectivity Guide
Wall Mount Solutions
WALL MOUNT SOLUTIONS
Wall-mount architectural products encompass a diverse group of
hardware that facilitates the placement of AV connectivity on a wall or
similar flat surface. As a group, they are more visible and frequently
used than any other architectural product category.
Extron offers an extensive and ever-growing line of wall-mountable
architectural products to meet almost every AV integration need. They
range from complete, preconfigured wallplates, to fully customizable
AV connectivity solutions.
These versatile products enable system designers to place AV
connectivity wherever it is needed, whether along a floorboard,
behind a large flat panel display, or within a secure, locking
enclosure.
Wallplates available
in US-gang sizes
Wallplates are available
in MK style for the UK,
Middle East, Singapore,
and Hong Kong regions
MODULAR WALLPLATES FIXED WALLPLATES
Flex55 104 Mounting Kit
shown with active and
pass-through modules
www.extron.com 17
PUSH
1
2
3
4
5
PUSH
12
3
PUSH
1
2
3
4
PUSH
1
2
3
4
5
HDMI
Fiber SC
XTP Shielded
XLR 6-pin Female
DVI-I
RCA1/4" Female Stereo
USB-A Female
Fiber LC
XLR 3-pin Female
Mini XLR 3-pin Male
DisplayPort 15-pin HD Female
USB-B Female
XLR 4-pin Female
Mini XLR 4-pin Male
3.5 mm Mini Stereo Jack
9-pin D Female
RJ-45
XLR 5-pin Female
Mini XLR 6-pin Neutrik Speakon
VIDEO
DATA
AUDIO
CONTROL/OTHER
CONNECTIVITY FOR FIXED AND MODULAR WALLPLATES
Extron Architectural Connectivity products for wallplates are available with a wide selection of input connectors to accommodate all common
video, audio, data, and control signal types.
Input Connector Types
18 Extron Architectural Connectivity Guide
IEC Type B
Extron ID: US
Where Used:
North America,
Japan
IEC Type G
Extron ID: UK
Where Used:
UK, Ireland,
Singapore, UAE
IEC Type E
Extron ID: FR
Where Used:
France, Belgium
IEC Type I
Extron ID: CN
Where Used:
China
IEC Type K
Extron ID: DK
Where Used:
Denmark
IEC Type M
Extron ID: SA
Where Used:
South Africa
Multi-Region
Extron ID: MULTI
Where Used:
Fits a variety of AC
plug IEC types.
See the Multi-Region
Compatibility Guide for details
at www.extron.com
IEC Type I
Extron ID: AUS
Where Used:
Australia
EC Type N
Extron ID: BR
Where Used:
Brazil
IEC Type J
Extron ID: SW
Where Used:
Switzerland
IEC Type L
Extron ID: IT
Where Used:
Italy
AVAILABLE AC OUTLETS FOR HSA
AND CABLE CUBBY ENCLOSURES
IEC Type F
Extron ID: EU
Where Used:
Central Europe
Cable Cubby 700 Top View
Extron is the only AV products manufacturer to offer discreet AC power connectivity solutions for all world markets. AC power modules for
CableCubbySeries/2 enclosures are available in AC-only and AC+USB versions. US AC with attached conduit is available in both versions.
Hideaway Series surface access enclosures are available with fixed AC outlets for the US, Europe, and other world markets.
AC Outlets
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90

Extron Hideaway HSA 300 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI