POLYWOOD PWS134-1-GY Installation guide

Brand: POLYWOOD

Model: PWS134-1-GY

Type: Installation guide

PILOT HOLE

CLOCKWISE

ROTATE

INSERT

NUTS

ROTATE

CLOCKWISE

TGD200

9/17/2012

ASSEMBLY INSTRUCTIONS

frame into the insert nuts

Description

the dowel screw attached to the arm

on the arm supports

TGD200, TGD201, TGD202

Qty.

Attach back of arm by threading

into the pilot hole until the arm is snug

Model:

4mm Hex Key (included)

__(2) ARM ASMB (LH/RH)

__(1) CHAIR

__(1) HARDWARE PACK

against the back leg.

Step 1

Step 2

Attach (A) bolts thru the seat

TOOLS NEEDED

ALLHARDWAREISCOATEDSTAINLESSSTEEL

TGD201

TGD202

HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)

A -1/4-20 X 1-3/4 WAFER SHCS

Step 2

Set table upright and tighten all bolts

__(1) Hardware pack

RT348, RCT348, RRT348, RBT348

Models: RT248, RCT248, RRT248, RBT248

Attach the leg assemblies to the table top using

(8) 3" screws.

(4) 3 1/4" Chair bolts.

Step 1

Attach feet to legs using

(4) 3" screws.

Qty. Description

Lay the table top on a flat surface.

4mm HEX KEY: INCLUDED

TOOLS NEEDED

Attach leg braces using

Step 3

__(1) Table top

__(4) Leg

__(2) Foot

__(2) Brace

HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED

9/19/2012

ASSEMBLY INSTRUCTIONS

FINE THREAD

B - 1/4-20 X 3-1/4 WAFER SHCS

Removable table plug

included in table

A - 14 X 3 SOCKET WAFER "B"

POLYWOOD PWS134-1-GY Installation guide

POLYWOOD PWS134-1-GY Installation guide

POLYWOOD PWS134-1-GY Installation guide

Related papers

Other documents