POLYWOOD PWS144-1-MA Installation guide

POLYWOOD
Brand
POLYWOOD
Model
PWS144-1-MA
Type
Installation guide

This manual is also suitable for

4MM T-HANDLE HEX KEY
(INCLUDED)
A - 1/4-20 X 1-3/4 WAFER SHCS
9/17/2012
ASSEMBLY INSTRUCTIONS
Attach the back leg, seat and back together by using
Step 2
Step 1
Model: NCB46
4
2
(2) 2½" chair bolts.
TOOLS NEEDED
Attach the footrest assembly using (4) 1¾" chair bolts.
__(1) Chair
__(1) Footrest
__(1) Hardware pack
Qty.
Description
ALL HARDWARE IS COATED STAINLESS STEEL
B - 1/4-20 X 2-1/2 WAFER SHCS
A
A
BB
A
A
Footrest Assembly
8
A - .27 X 2-1/2 SOCKET WAFER A
4
B - .27 X 3 SOCKET WAFER A
Lay table top on flat surface.
DescriptionQty.
Attach the leg assemblies to the table frame using
Step 1
Attach feet to legs using (4) 3¼" Chair bolts
.
Step 3
NCBT44
NCRT44
NCCT44
NCT44
Model:
27x2½" screw *Do not tighten until last step
.
(8)
(4) .27x3" screw
Attach the leg braces to the leg assemblies using
Set table upright and tighten all bolts.
Step 4
4mm HEX KEY: INCLUDED
TOOLS NEEDED
Step 2
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
__(1) Hardware pack
9/17/2012
ASSEMBLY INSTRUCTIONS
4
C - 1/4-20 X 3-1/4 WAFER SHCS
A
A
Table Top
B
B
Brace
ALLHARDWAREISCOATEDSTAINLESSSTEEL
Removable table plug
included in table.
  • Page 1 1
  • Page 2 2

POLYWOOD PWS144-1-MA Installation guide

POLYWOOD
Brand
POLYWOOD
Model
PWS144-1-MA
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents