POLYWOOD CDD200GR Operating instructions

Model:

Qty. Description

4mm Hex Key (included)

CDD200, CDD201, CDD202

frame into the insert nuts

on the arm supports

__(1) HARDWARE PACK

__(2) ARM ASMB (RH/LH)

__(1) CHAIR

Step 1

until the arm is snug against the back leg.

the attached dowel screw into the pilot hole

Attach back of arm by threading

Step 2

Attach (4)1-3/4 bolts thru the seat

TOOLS NEEDED

ALLHARDWAREISCOATEDSTAINLESSSTEEL

A -1/4-20 X 1-3/4 WAFER SHCS

CDD201

CDD202

HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)

CLOCKWISE

ROTATE

PILOT HOLE

INSERT

NUTS

ROTATE

CLOCKWISE

CDD200

ASSEMBLY INSTRUCTIONS

11/30/2012