American Standard Silhouette 7179.815 User manual

Brand: American Standard

Model: Silhouette 7179.815

Type: User manual

This manual is also suitable for

G25

Revised 2/08

SILHOUETTE™ 33" DUAL LEVEL KITCHEN SINK

• Americast

brand engineered material

• Dual level double bowl design

• Titanium enamel - heat resistant up to 1000°

• Acid-resisting glossy porcelain nish

• Tile edge installation

• Silicone sealant supplied

• Available in 1, 3, 4, or 5 faucet hole

conguration

• Customized hole punchings available

(see page G56)

Tile Edge:

❏ 7179.011 Center hole only

❏ 7179.813 3 hole

❏ 7179.814 4 hole

❏ 7179.815 5 hole

Nominal Dimensions:

838 x 559 x 241mm

(33" x 22" x 9-1/2")

Bowl sizes:

Right Hand: 191mm (7-1/2") wide

413mm (16-1/4") front to back

178mm (7") deep

Left Hand: 527mm (20-3/4") wide

476mm (18-3/4") front to back

229mm (9") deep

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.4M for Americast Plumbing Fixtures

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SILHOUETTE™ 33"

DUAL LEVEL SINK

AMERICAST

SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS

* See faucet section for available models

To Be Specied:

❏ Color:

❏ Faucet*:

❏ Faucet Finish:

❏ Basket Strainer: 4331.013

❏ Soap Dispenser: 4503.115, (specify color):

❏ Traps:

Optional Accessories:

❏ Large Wood Cutting Board: 9000.250

❏ Small Wood Cutting Board: 9000.185

❏ Colander for Cutting Board: 8102.100, Color:

❏ Large Colander: 8103.100, Color:

❏ Web Cover: 8106.100, Color:

❏ Bottom Sink Rack (Left): 7407.100, Color:

G26

7179.813/814/815

NOTES:

COUNTERTOP CUTOUT 806mm X 527mm WITH 25mm RADIUS

(31-3/4 X 20-3/4 WITH 1" RADIUS) AT CORNERS.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND

COUNTERTOP SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ASME Standard A112.19.4

These measurements are subject to change or cancellation. No responsibility

is assumed for use of superseded or voided leaet.

FINISHED WALL

OR SPLASHBACK

C/L

SEALING

COMPOUND

FINISHED

FLOOR

*CUTOUT

NOTE

7179.814

4 HOLE

1-1/2" O.D.

TAILPIECE

3/8"

(10mm)

7179.815

5 HOLE

TILED

COUNTERTOP

(BY OTHERS)

2-1/8"

(54mm)

1-1/2" (38mm)

DIA. HOLES TYP.

(102mm)

5/8"

(16mm)

2" (51mm)

OPTIONAL

7-7/8"

(200mm)

8-1/8"

(206mm)

3-1/2"

(89mm)

DIA.

9-3/4"

(248mm)

11-1/8"

(282mm)

16-1/2"

(419mm)

33"

(838mm)

22"

(559mm)

(152mm)

5-3/4"

(146mm)

36" (914mm)

SUGGESTED

9-1/8"

(232mm)

5-3/4"

(146mm)

SILHOUETTE™ 33"

DUAL LEVEL SINK

AMERICAST

Revised 2/08

American Standard Silhouette 7179.815 User manual

Brand: American Standard

Model: Silhouette 7179.815

Type: User manual

This manual is also suitable for

Download PDF

report

American Standard Silhouette 7179.815 User manual

This manual is also suitable for

American Standard Silhouette 7179.815 User manual

Related papers

Other documents