Hukoro F50543-QC User manual

Type
User manual

Hukoro F50543-QC is a versatile lighting fixture designed to enhance your indoor spaces with its adjustable arms and customizable chain length. With safety as a priority, it includes a cautionary note to inspect wire insulation for any damage before installation, emphasizing the need to disconnect power before starting the process. The fixture comes with all the necessary hardware, including a nipple and nut, canopy, screw collar, ring, fixture finial, cover, mounting unit, glass shade, mounting screws, stem holders, and chain.

Hukoro F50543-QC is a versatile lighting fixture designed to enhance your indoor spaces with its adjustable arms and customizable chain length. With safety as a priority, it includes a cautionary note to inspect wire insulation for any damage before installation, emphasizing the need to disconnect power before starting the process. The fixture comes with all the necessary hardware, including a nipple and nut, canopy, screw collar, ring, fixture finial, cover, mounting unit, glass shade, mounting screws, stem holders, and chain.

Wire
strippers
Ladder Safety
glasses
Electrical
tape
Phillips
screwdriver
PliersFlat blade
screwdriver
CAUTION
Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect
in the wire, do not attempt installation.
Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Bulbs
(not included)
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
EXPLODED PARTS
HARDWARE INCLUDED
Mounting
Unit
Mounting Screws
Wire Nuts
Fixture
Fixture
Glass ShadeCover
Cover
Nipple and Nut
Nipple and Nut
Fixture
Finial
Fixture Finial
Mounting Unit Mounting
Screws Wire Nuts
Chain
Chain
Stem
Stem
Holders
Holders
Canopy
Canopy
Screw Collar
Ring
Screw Collar
Ring
Glass Shade
INSTALLATION
STEP 1
Adjust arms to proper position.
STEP 3STEP 2
Use the mounting screws to attach
the mounting unit to the junction box.
1. Weave the fixture wire and
fixture ground wire through
the nipple and nut, cover and
fixture finial.
2.Tighten the nipple and nut, cover
and fixture finial into the fixture.
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 9
Install bulb (not included)
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure with electrical tape.
STEP 8
STEP 6
STEP 5
1. Pass the chain and the
branch wires through the
screw collar ring and canopy.
2. Attach the end of the chain to
the mounting unit.
3. Feed the branch wires through
the pipe nipple on the mounting unit.
STEP 4
1. Choose the length of the chain
you need (Open the chain using
a phillips screwdriver (not included)
and pliers (not included). )
2. Attach the end of the chain to
the fixture finial.
STEP 7
Secure the canopy to the mountring unit
with the screw collar ring.
Attach the glass shade onto fixture using holders and stem.
Smooth side of wire from
the fixture identified
with the label "L"
Ground wire from
the Fixture
Ribbed side of wire from
the fixture identified
with the label "N"
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)
  • Page 1 1
  • Page 2 2

Hukoro F50543-QC User manual

Type
User manual

Hukoro F50543-QC is a versatile lighting fixture designed to enhance your indoor spaces with its adjustable arms and customizable chain length. With safety as a priority, it includes a cautionary note to inspect wire insulation for any damage before installation, emphasizing the need to disconnect power before starting the process. The fixture comes with all the necessary hardware, including a nipple and nut, canopy, screw collar, ring, fixture finial, cover, mounting unit, glass shade, mounting screws, stem holders, and chain.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI