YOUKAIN HDLP-51114 User manual

Brand: YOUKAIN

Model: HDLP-51114

Type: User manual

YOUKAIN HDLP-51114 is a versatile light fixture designed to enhance your indoor lighting. With its adjustable chain length, you can customize the hanging height to suit your needs. The fixture features a stylish iron ring and a glass shade, adding a touch of elegance to your décor. Installation is a breeze with the included mounting hardware and easy-to-follow instructions. Upgrade your home's ambiance with this beautiful and functional light fixture.

Wire

strippers

Ladder Safety

glasses

Electrical

tape

Phillips

screwdriver

PliersFlat blade

screwdriver

CAUTION

Inspect the wire insulation for any cuts,

abrasions, or exposed copper that may have

resulted during shipping. If there is a defect

in the wire, do not attempt installation.

Before starting installation of this ﬁxture or

removal of a previous ﬁxture, disconnect the

power by turning oﬀ the circuit breaker or by

removing the fuse at the fuse box.

Bulbs

(not included)

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

ASSEMBLY INSTRUCTIONS

TOOLS REQUIRED

EXPLODED PARTS INSTALLATION

STEP 1

HARDWARE INCLUDED

Fixture

Stem A

Stem B

Stem C

Fixture

Finial Iron Ring

Iron Ring

Bracket

Decorative

Screws

Decorative

Screws

Rubber

Ring

Rubber Ring

Washer

Cover

Glass Shade

Hex Nut

Mounting Unit Mounting

Screws Wire NutsChain Canpoy Screw Collar

Ring

Screw Collar Ring

Mounting Unit

Canopy

Mounting Screws

Wire Nuts

Fixture Finial

Chain

Attach the bracket to the iron ring through screw holes as shown,

and secure it with decorative screws.

STEP 2

Attach the ﬁxture to the iron ring

through screw holes as shown, and

secure it with decorative screws.

Screw the stem A, stem B and

ﬁxture ﬁnial onto the ﬁxture.

STEP 3

ASSEMBLY INSTRUCTIONS INSTALLATION

STEP 9

Install bulb (not included)

STEP 5

Use the mounting screws to attach

the mounting unit tothe junction box.

STEP 4

1. Choose the length of the chain you need (Open

the chain using a phillips screwdriver (not included)

and pliers (not included). )

2. Attach the end of the chain to the ﬁxture ﬁnial.

STEP 6

1. Pass the chain and the branch wires through

the screw collar ring and canopy.

2. Attach the end of the chain to the

mounting unit.

3. Feed the branch wires through the pipe nipple

on the mounting unit.

STEP 7

Make the electrical connection from the junction

box to the ﬁxture. Connect the ground wire to the

mounting unit using the preinstalled green ground

screw. Then, connect the positive, negative and

ground wires with the supplied wire nuts. Secure

with electrical tape.

STEP 8

Secure the canopy to the

mountring unit with the

screw collar ring.

Smooth side of wire from

the ﬁxture identiﬁed

with the label "L"

Ground wire from

the Fixture

Ribbed side of wire from

the ﬁxture identiﬁed

with the label "N"

Black or Red wire (hot)

from the junction box

White wire (neutral)

from the junction box

Bare or Green ground wire

from the junction box

*Green Ground Screw

*Sealing tape

(not included)

Washer

Rubber Ring

Washer

Rubber Ring

Tighten the stem C into the ﬁxture, place the washer,

rubber ring and glass shade onto the stem C, the secure

with hex nut and cover.

STEP 10

YOUKAIN HDLP-51114 User manual

Brand: YOUKAIN

Model: HDLP-51114

Type: User manual

Download PDF

report

YOUKAIN HDLP-51114 User manual

YOUKAIN HDLP-51114 User manual

Other documents