Hukoro NF42873-05a User manual

Type
User manual

This manual is also suitable for

Wire
strippers
Ladder Safety
glasses
Electrical
tape
Phillips
screwdriver
PliersFlat blade
screwdriver
CAUTION
Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect
in the wire, do not attempt installation.
Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Glass shade
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
EXPLODED PARTS INSTALLATION
STEP 1
Use the mounting screws to attach the mounting unit
to the junction box.
HARDWARE INCLUDED
Fixture
Fixture Mounting Unit
Mounting Unit
Mounting
Screws
Mounting
Screws
Wire Nuts
Wire Nuts
Glass Glass Shade Screws
Screws
Screws
Screwdriver
Screwdriver
Decorative
Screws
Decorative Screws
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Then, connect the positive, negative and
ground wires with the supplied wire nuts. Secure with electrical tape.
STEP 2
Glass
White wire from
the fixture
Ground wire from
the Fixture
Black wire from
the fixture
Black or Red wire (hot)
from the junction box
White wire (neutral)
from the junction box
Bare or Green ground wire
from the junction box
*Green Ground Screw
*Sealing tape
(not included)
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 5
STEP 4
Attach the glass shade onto fixture using
decorative screws as show.
Attach the glass into fixture using screws as show.
Tighten the screws with a screwdriver.
STEP 3
Attach the fixture to the mounting unit through
screw holes as shown, and secure it with screws.
Tighten the screws with a screwdriver.
  • Page 1 1
  • Page 2 2

Hukoro NF42873-05a User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI