CRITIC
AL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMA
TION C
ALL: 1-800-BUY
-MOEN
w
ww.moen.com
Rev. 4/05
S
INK DESCRIPTION
• M
anufactured of 18 gauge, type 301 nickel-bearing
s
tainless steel
• The large bowl is a minimum of 21" x 16" x 10"
• The sink ledge has three fixture mounting holes,
1-1/2" in diameter and 4" on center
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound
deadening and inhibits condensation
• The exposed surfaces are polished to a lustrous
satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 24-3/8" x 21-3/8", with a
3/8" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
WARRANTY
• Warranted for fifteen years against material or
manufacturing defects
17"
(432mm)
10-1/2"
(267mm)
21"
(533mm)
8"
(203mm)
16"
(406mm)
22"
(559mm)
4-1/8"
(105mm)
25"
(635mm)
4"
(102mm)
2"(51mm)
R TYP.
1"(25mm)
R TYP.
3/8"(10mm)
R TYP.
3-1/2"(89mm)
DIA.
2"
(25mm)
2-1/2"
(64mm)
1-1/2" (38mm)
DIA.TYP.
1-7/8"
(48mm)
4"
(102mm)
10"
(254mm)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
D
IMENSION
CONTINUOUS
"U" CHANNEL
S
INK
CLAMP
COUNTERTOP
SEALANT MATERIAL
Installation Detail
Lancelot
®
Single Bowl Kitchen Sink
Model:
22338
(LD-2522-3-10)
/