CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 11/10
SINK DESCRIPTION
• Manufactured of 18 gauge stainless steel
• The single bowl is a minimum of 21" x 16" x 8"
• The sink ledge has four fixture mounting holes,
1-1/2" in diameter and 4" on center
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound
deadening and inhibits condensation
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 24-3/8" x 21-3/8", with a
3/8" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified to ASME A112.19.3/CSA B45.4 and
all applicable specifications referenced therein
WARRANTY
• Warranted for fifteen years against material or
manufacturing defects
Lancelot
®
Single Bowl Drop-In Sink
Model: 22324
(L-2522-4)
– DISCONTINUED –
8"
(203mm)
17"
(432mm)
10-1/2"
(267mm)
21"
(533mm)
8"
(203mm)
16"
(406mm)
22"
(559mm)
4-1/8"
(105mm)
25"
(635mm)
4"
(102mm)
2" R TYP.
1" R TYP.
3/8" R TYP.
3-1/2" DIA.
2"
(25mm)
1-7/8"
(48mm)
1-7/8"
(48mm)
1-1/2" DIA.TYP.
4"
(102mm)
4"
(102mm)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
Installation Detail
/
