2. Cirrus™ and Umbrella Installation
Tighten knob to secure.
-Fully open photographic umbrella.
-Insert umbrella rod through Mini-Cirrus™
umbrella hole (as shown).
-Holding bulb by its base, screw bulb into
socket on Mini-Cirrus™ Light Head.
Mini-
-Attach Mini-Cirrus™ onto stud on lightstand.
x 2
Softboxes
x 4
Light Stands
x 2
Backdrop Stands
x 1
Crossbar Set
x 3
Clamps
x 3
Backdrops
x 2
Umbrellas
x 4
Light Heads
x 4
Bulbs
3: Background Support Installation
5ft. Width – Use A+C Rods (10'x5')
-7.5 ft Width – Use A+B+C Rods
(Attach Clamps onto Crossbar before
finalizing Installation)
-
4 Backdrop Muslin Installation
Using attached Muslin Clamps or Backdrop Holders, attach each corner of
Backdrop Muslin.
-Attach the remaining middle Muslin Clamps onto Backdrop Muslins.
(Note: This step only needs to be done once. For removal, muslin clamps stay
on muslin for easy re-installation.)
(To purchase more Muslin Clamps or Backdrop Holders,please contact us at
562-404-0493 or email service@lincostudio.com).
.
-
2 Crossbars 3 Crossbars
Please call 562-404-0593 or email service@lincostudio.com
if you have any questions.
Our Business Hours are 08:00-16:30 PST Monday-Friday.
LINCO INC. AM243 INSTRUCTIONS
1. and Installation
Tighten knob to secure.
-Fully open Pheno Square.
-Secure attached Pheno Square and Mini-Cirrus™
onto Lightstand Stud.
-Screw in bulbs into Sockets on Mini-Cirrus™
(Mini-Cirrus™ can ONLY accept LINCOInc®
LED and Fluorescent Bulbs.)
-Cover Pheno Square with diffuser. (Optional)
Mini-Cirrus™ Pheno Square
-Attach Mini-Cirrus™ onto stud on lightstand.
A B C
A
C
B
x 1
Carrying bag
