Page is loading ...
Upland Softbox Studio
Lighting Kit
Part 1 What’s in the Package
Softbox with Light Holder X 2 pcs
Light Stand X 2 pcs Light Bulb X 2 pcs
Backdrop X 3 pcs Clamp X 3 pcs
Carrying Bag X 1 pcs Backdrop Stand X 1 pc
Part 2 Assembly Instructions
Softbox Light Stand
1. Unfold the light stand after
loosening the knobs
2. Extend the stand to
an appropriate height.
Lock the stand by fastening the knobs
3. Unfold the softbox
4. Assemble the light holder onto the light stand
5. Screw the light bulb on the light holder
6. At last, put on the diffusion cloth
Backdrop Stand Kit
1. Unfold the backdrop stand
after loosening the knobs
2. Extend the stand to
the appropriate height
3. Assemble the backdrop crossbar, then fix the crossbar
on the stand by fastening the screw on both sides
4. Hang the backdrop on the stand, use the clamps to
maintain the backdrop
5. Then the softbox lighting kit is completed! Just make a
small adjustment for better shooting result.
/
