Linco LINCO store 9600 Lumens Studio Photography Lighting kit Installation guide

Brand
Linco
Model
LINCO store 9600 Lumens Studio Photography Lighting kit
Type
Installation guide

This manual is also suitable for

3: Easy Softbox and Flora X™ Installation
Secure attached Easy Softbox and Flora X™ onto Lightstand Stud.
-Screw in bulbs into Ceramic Sockets on Flora X™
(Flora X™ can ONLY accept LINCOInc® LED and Fluorescent Bulbs.)
-Cover Easy Softbox with diffuser. (Optional)
-Repeat Step 3 for remaining Flora X™.
-
4: Boom Stand Installation
Move Boom Clamp to a center position along Boom Arm.
-Attach Boom Arm onto lightstand by securing Boom Clamp
onto Lightstand Stud.
-Attach Sand Bag onto opposite end of Boom Stud and add
counterweight.
-Secure attached Flora X™ and Easy Softbox onto Boom Arm.
-Screw in bulbs into Ceramic Sockets on Flora X™
-Cover Easy Softbox with diffuser. (Optional)
-
5: Background Support Installation
5ft. Width – Use A+C Rods (10'x5')
-7.5 ft Width – Use A+B+C Rods
-10 ft Width – Use A+B+B+C Rods (5'x10')
(Attach Clamps onto Crossbar before finalizing
Installation)
-
6: Backdrop Muslin Installation
Using attached Muslin Clamps or Backdrop Holders, attach
each corner of Backdrop Muslin.
-Attach the remaining middle Muslin Clamps onto Backdrop Muslins.
(Note: This step only needs to be done once. For removal,
muslin clamps stay on muslin for easy re-installation.)
(To purchase more Muslin Clamps or Backdrop Holders,please
contact us at 562-404-0493 or email service@lincostudio.com).
-
A
B
C
B
A B CB
x 3
Softboxes
x 3
Light Heads
x 12
Bulbs
x 3
Light Stands
x 2
Backdrop Stands
x 1
Crossbar Set
x 5
Clamps
x 3
Backdrops
x 1
Boom Arm
x 1
Sand Bag
x 1
Carrying bag
PRESS
CLOCKWISE
1: Flora X™ Easy Softbox Setup
-Remove Softbox from Flat Storage Bag.
-Release Belt and Softbox will automatically pop open.
(Please use caution when releasing spring rods)
Please call 562-404-0593 or email service@lincostudio.com
if you have any questions.
Our Business Hours are 08:00-16:30 PST Monday-Friday.
LINCO INC. FLORA X™ INSTALLATION INSTRUCTIONS
(AM077 & AM143)
2: Easy Softbox and Flora X™ Installation
Place Easy Softbox™ on ground or flat surface.
-Align “X” on Flora X™ with X spring rods on
Easy Softbox
-Holding the Handle on Flora X™, push
downwards and rotate clockwise.
-Be sure X spring rods click and lock into “X” on Flora X™
-
2 Crossbars 3 Crossbars 4 Crossbars
  • Page 1 1

Linco LINCO store 9600 Lumens Studio Photography Lighting kit Installation guide

Brand
Linco
Model
LINCO store 9600 Lumens Studio Photography Lighting kit
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents