Linco AM262 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Linco AM262 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1. Morning Glory™ Softbox and Mini-Cirrus™ Installation
-Push down on spring stopper on Mini-Morning Glory™ Softbox to release spring rod tension. (as shown). Remove contents.
-Fully open Morning Glory™ Softbox.
-Attach Mini-Cirrus™ onto stud on lightstand. Tighten knob to secure.
-Attach Mini-Morning Glory™ Softbox onto Mini-Cirrus.
-Holding onto the base, secure Mini-Morning Glory™ Softbox onto Mini-Cirrus™ by tightening knob (as shown).
-Holding bulb by its base, screw bulb into socket on Mini-Cirrus.
x 3
Softboxes
x 3
Light Heads
x 3
Bulbs
x 3
Light Stands
Please call 562-404-0593 or email service@lincostudio.com if you have any questions.
Our Business Hours are 08:00-16:30 PST Monday-Friday.
x 1
Boom Arm
x 1
Sand Bag
LINCO INC. MORNING GLORY INSTRUCTIONS
(AM262)
2. Boom Stand Installation
-Move Boom Clamp to a center position along Boom Arm.
-Attach Boom Arm onto lightstand by securing Boom Clamp onto Lightstand Stud.
-Attach Sand Bag onto opposite end of Boom Stud and add counterweight.
-Secure attached Cirrus™ and Morning Glory™ onto Boom Arm.
-Screw in bulb into Ceramic Socket on Cirrus
-Cover Morning Glory™ with diffuser for Softbox. (Optional)
/