2. Workrite Ergonomics
  3. Hanging Ped Power Supply

Workrite Ergonomics Hanging Ped Power Supply Installation guide

  • Hello! I'm your chat assistant. I've reviewed the Assembly & Installation Instructions for the Workrite Hanging Pedestal Power Supply, model ACC-HPED-PWR-B. This document details the process of installing the power supply and securing cables. I am ready to answer questions you might have.
  • What is included with the Hanging Pedestal Power Supply?
    What additional items are needed for the power supply installation?
    How is the drawer removed?
Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 3
Tools Required:
Required, Sold Separately:
Desk or Table
Hanging Pedestal
Included:
#2 Phillips Screwdriver
ID Part Name Qty
A Hanging Pedestal Power Supply 1
B Cable Clips 3
Assembly & Installation Instructions:
Hanging Pedestal Power Supply
ACC-HPED-PWR-B
Completely remove drawer
from main body of pedestal.
Flip the plastic tab
on each side of
drawer to release
drawer from main
body (right tab
down, left tab up).
REMOVE DRAWER
1
Plastic Tab
A
B
2 of 3 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Remove plate from Main Body by
removing x2 Phillips screws
Insert power supply in
cutout and secure with
x2 Phillips screws which
were removed in Step 2
3.1
2.1
REMOVE PLATE FROM MAIN BODY
PLACING POWER SUPPLY
2
3
Main Body
Plate
Power Supply
A
3 of 3 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Secure power supply power cord
along top of Main Body with
cable clips
Insert drawer back into
Main Body
1500453 Rev A
4.1
4.2
SECURING CABLE
KEEP CABLES AWAY FROM
ANY MOVING PARTS
4
Drawer
BCable Clips
Power Cord
/