Workrite Ergonomics Fundamentals AKP01 Installation guide

  • Hello! I've reviewed the assembly instructions for the Fundamentals AKP 01, which includes instructions for mounting a keyboard arm, attaching a keyboard platform, and adhering a mousing surface.The document also provides a list of needed parts and tools. I'm ready to answer your questions about the setup process!
  • What tools are required for assembly?
    How is the Keyboard Platform attached to the Arm?
    How to choose mousing hand configuration?
Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1 of 1
Assembly Instructions: Fundamentals AKP 01
#1500217 - Rev C
Parts Included
Tools Required
Mount the Keyboard Arm to the
Worksurface
Use the instructions that came with
the Keyboard Arm to mount arm under
worksurface.
Attach Keyboard Platform to
Keyboard Arm
Attach Keyboard Platform (B) to Arm (A)
using the four Flat Head Screws (C) and
Keps-Nuts (D) provided.
Adhere Mousing Surface to
Keyboard Platform
Choose either le or right handed. If
choosing le handed, move the Mouse
Trap to the le as well.
A Fundamentals Keyboard
Arm
Qty: 1 B In-Line Keyboard
Platform
Qty: 1 C #10–24 × ⅞" Flat Head
Screws
Qty: 4 D Mouse Pad
Qty: 1
#2 tip Phillips screwdriver or drill/driver
1
2
3
1
2
A
C
B
Above Worksurface
Under Platform
Mouse Trap
/