Lenovo ThinkAgile CP 4000 Series Installation guide

Brand: Lenovo

Model: ThinkAgile CP 4000 Series

Type: Installation guide

This manual is also suitable for

ThinkAgile CP 6000 Series

Lenovo ThinkAgile CP

Hardware Installation Guide

Models: CP 4000, CP 6000

Lenovo ThinkAgile CP Hardware Installation

Guide

Models: CP 4000, CP 6000

Note

Before using this information and the product it supports, be sure to read and understand the safety

information and the safety instructions, which are available at the following address:

http://thinksystem.lenovofiles.com/help/topic/safety_documentation/pdf_files.html

In addition, be sure that you are familiar with the terms and conditions of the Lenovo warranty for your

solution, which can be found at the following address:

http://datacentersupport.lenovo.com/warrantylookup

First Edition (August 2018)

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services

Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No.

GS-35F-05925.

Contents

Figures . . . . . . . . . . . . . . . . . . v

Tables . . . . . . . . . . . . . . . . . vii

Chapter 1. ThinkAgile CP overview . . . 1

ThinkAgile CP 4000 Series overview . . . . . . . . 1

ThinkAgile CP 6000 Series overview . . . . . . . . 3

ThinkAgile CP solution components . . . . . . . . 5

Storage block parts list . . . . . . . . . . . 5

Compute block parts list . . . . . . . . . . 7

Power cords . . . . . . . . . . . . . . . 9

Chapter 2. Setting up ThinkAgile

CP . . . . . . . . . . . . . . . . . . . 11

Installing ThinkAgile CP hardware in a rack . . . . 11

Installing the ThinkAgile CP compute block . . 12

Installing the ThinkAgile CP storage block. . . 17

Installing the ThinkAgile CP interconnect . . . 21

Installing the top-of-rack switch (optional). . . 25

Cabling the components . . . . . . . . . . . 28

Cabling a single Interconnect configuration . . 29

Cabling a redundant Interconnect

configuration . . . . . . . . . . . . . . 35

Chapter 3. Getting help and

technical assistance . . . . . . . . . . 41

iv Lenovo ThinkAgile CP Hardware Installation Guide

Figures

1. Storage block components . . . . . . . . . 6

2. Compute node components. . . . . . . . . 7

3. ThinkAgile CP slide box contents. . . . . . 12

4. Slides . . . . . . . . . . . . . . . . 13

5. Left slide rear installation . . . . . . . . . 13

6. Left slide front installation. . . . . . . . . 14

7. Front latches on slides . . . . . . . . . . 14

8. ThinkAgile CP enclosure . . . . . . . . . 15

9. ThinkAgile CP enclosure installation . . . . 15

10. Enclosure installation into rack. . . . . . . 16

11. Screw pin types included with rail kit . . . . 17

12. Installing the rail in the rack . . . . . . . . 18

13. Removal of side cover . . . . . . . . . . 19

14. Installing the enclosure into the rack . . . . 19

15. Installing screws on front of enclosure . . . . 20

16. Reinstalling the side cover . . . . . . . . 20

17. Attaching mounting brackets to switch . . . 26

18. Securing switch to rack posts . . . . . . . 26

19. Installing power cord retention clip . . . . . 27

20. BMC management network connectivity in a single

Interconnect configuration . . . . . . . . 29

21. SIC compute node and network interconnect

connections . . . . . . . . . . . . . . 30

22. SIC storage block and network interconnect

connections . . . . . . . . . . . . . . 30

23. Customer data center connection: single

direct link . . . . . . . . . . . . . . . 31

24. Customer data center connection: dual direct

link . . . . . . . . . . . . . . . . . 33

25. BMC management network connectivity in a

redundant interconnect configuration . . . . 35

26. RIC compute node and network interconnect

connections . . . . . . . . . . . . . . 36

27. RIC storage block and network interconnect

connections . . . . . . . . . . . . . . 37

28. Inter-interconnect link network

connectivity . . . . . . . . . . . . . . 37

29. Customer data center network

connection . . . . . . . . . . . . . . 38

vi Lenovo ThinkAgile CP Hardware Installation Guide

Tables

1. Storage block parts listing . . . . . . . . . 6

2. Parts listing, compute node . . . . . . . . . 8

3. 10 Gbps interconnect ports . . . . . . . . 38

4. 40 Gbps interconnect ports . . . . . . . . 38

viii Lenovo ThinkAgile CP Hardware Installation Guide

Chapter 1. ThinkAgile CP overview

The Lenovo

ThinkAgile

™

CP solution is a scalable, modular, software-defined integrated system delivering

cloud-like management and orchestration, automated life cycle management, and integration into the private

enterprise data center.

ThinkAgile CP 4000 Series overview

The Lenovo ThinkAgile CP 4000 Series scales as an initial data-management footprint for managed service

provider and cloud service provider environments that start on a smaller scale but are poised for growth. The

4000 Series also supports business continuity when deployed remotely as an offsite backup for disaster

recovery.

The Lenovo ThinkAgile CP 4000 Series comprises the following components:

Compute block

• 1 D2 enclosure, fully populated PSU, fan,

220V w/ 10Gb SFP+ network module

• Minimum 2 SD530 nodes, maximum 4 nodes

• 128GB, 256GB RAM per node

• 8+ cores per CPU, 1-2 sockets filled AXQT,

and others

• 2x SFP+ DAC cables per node, 1.5m and

other lengths permitted

• Boot: 1x SATA 240GB

• Dimensions: 41.0 x 562.0 x 222.0 mm (1.7 x

22.2 x 8.8 inches)

• Maximum weight: 7.5 kg (16.6 lb)

Storage block

• 1 Storage Block: (SB-S10)

• Dual controller - single CPU per controller

• 8x SFP Base-T SFP+ transceivers

• 8x CAT6 cables, 1.5m and other lengths

permitted

• 2x CAT5e cables, 1.5m and other lengths

permitted

• 32GB RAM per controller

• 8,16,24 drives

• 800GB, 1.6TB NVMe drives per controller

• Drives must be consistent within a storage

block

• Dimensions: 87.6 x 446.4 x 857.2 mm (3.4 x

17.6 x 33.7 inches)

• Maximum weight: 42.0 kg (92.6 lb)

Interconnect

• 1-2 x CP-I-10

• Lenovo sticker – certifications for EdgeCore

part number

• Dimensions: 438.4 x 473 x 43.4 mm (17.26 x

18.62 x 1.71 inches)

• Maximum weight: 8.95 kg (19.73 lb), with two

installed PSUs

Top-of-rack switch

Lenovo RackSwitch G7052

Services Lenovo Deployment Services mandatory

Lenovo HW Installation Service optional

Software Cloudistics Software preloaded on Compute,

Storage, Switch

Standard or Guardian edition

2 Lenovo ThinkAgile CP Hardware Installation Guide

ThinkAgile CP 6000 Series overview

The Lenovo ThinkAgile CP 6000 Series offering can be scaled up to 40 compute nodes to support

mainstream enterprise workloads and mixed-workload environments.

The Lenovo ThinkAgile CP 6000 Series comprises the following components:

Compute block

• 1 D2 enclosure, fully populated PSU, fan,

220V w/ 10Gb SFP+ network module —

maximum 10 chassis

• Minimum 2 SD530 nodes, default 4,

maximum 40 nodes

• 128GB, 256GB, 384GB, 512 GB, 768GB,

1024GB RAM

• 8+ cores per CPU, 1-2 sockets filled AXQT,

and others

• 2x SFP+ DAC cables per node, 1.5m and

other lengths permitted

• Boot: 1x SATA 240GB

• Dimensions: 41.0 x 562.0 x 222.0 mm (1.7 x

22.2 x 8.8 inches)

• Maximum weight: 7.5 kg (16.6 lb)

Storage block

• 1 Storage Block— maximum 5 blocks (SB-

D20)

• Dual controller - 2CPU per controller

• 8x SFP Base-T SFP+ adapters

• 8x CAT6 cables per Storage Block, 1.5m and

other lengths permitted

• 64GB RAM per controller

• 8,16,24 drives

• 1.6TB, 3.2TB, 6.4TB NVMe drives per

controller

• Drives must be consistent within a controller

• Dimensions: 87.6 x 446.4 x 857.2 mm (3.4 x

17.6 x 33.7 inches)

• Maximum weight: 42.0 kg (92.6 lb)

Interconnect

• 2 x CP-I-10

• Lenovo sticker – certifications for EdgeCore

part number

Note: Storage and server quantity limited

based on ports consumed

• Dimensions: 438.4 x 473 x 43.4 mm (17.26 x

18.62 x 1.71 inches)

• Maximum weight: 8.95 kg (19.73 lb), with two

installed PSUs

Chapter 1. ThinkAgile CP overview 3

Top-of-rack switch

Lenovo RackSwitch G7052

Services Lenovo Deployment Services mandatory

Lenovo HW Installation Service optional

Software Cloudistics Software preloaded on Compute,

Storage, Switch

Standard or Guardian edition

4 Lenovo ThinkAgile CP Hardware Installation Guide

ThinkAgile CP solution components

Storage block parts list

This section includes the components that come with the ThinkAgile CP storage block.

Use this parts list to identify each of the components that are available for your ThinkAgile CP storage block.

The parts listed in the table below fall into these categories:

• Tier 1 customer replaceable unit (CRU): Replacing Tier 1 CRUs is your responsibility. If Lenovo installs a

Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

• Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request Lenovo to install it, at

no additional charge, under the warranty service type designated for your storage.

• Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

• Consumable and structural parts: Purchase and replacement of consumable and structural parts

(components such as a cover or bezel) is your responsibility. If Lenovo acquires or installs a structural

component at your request, you will be charged for the service.

Chapter 1. ThinkAgile CP overview 5

Figure 1. Storage block components

Table 1. Storage block parts listing

Index Description

Tier 1 CRU Tier 2 CRU

FRU

Consumable and

structural parts

Storage controllers

√

Chassis

√

3 Power supplies

√

4 Rail kit

√

2.5-inch drive fillers

√

6 2.5-inch hot swap drives

√

For more information about ordering the parts shown here, see the Lenovo Data Center Support page for this

product.

Lenovo ThinkAgile CP Hardware Installation Guide

Compute block parts list

This section includes the components that come with the ThinkAgile CP compute block.

Figure 2. Compute node components

Chapter 1. ThinkAgile CP overview 7

Table 2. Parts listing, compute node

Index Description

Tier 1 CRU

Tier 2

CRU

FRU

Consuma-

ble and

Structural

part

For more information about ordering the parts shown in Figure 2 “compute node components” on page 7, see the

Lenovo Data Center Support page for this product.

PCIe adapter

√

Air baffle

√

Processor and heat sink assembly (85mm heat sink)

√

Processor and heat sink assembly (108mm heat

sink)

√

Processor and heat sink assembly (108mm heat

sink)

√

Processor and heat sink assembly (T-shaped heat

sink)

√

Trusted Cryptographic Module

√

M.2 backplane

√

DIMM

√

2.5-inch drive bay blank (for empty bays next to the

backplane)

√

2.5-inch drive bay blank panel (for drive bays on the

backplane)

√

2.5-inch hot-swap drive

√

Compute node tray

√

KVM breakout module

√

2.5-inch 6-drive hot-swap SAS/SATA backplane

√

2.5-inch 6-drive hot-swap SAS/SATA/NVMe

backplane

√

2.5-inch 4-drive hot-swap SAS/SATA backplane

√

2.5-inch 4-drive hot-swap NVMe backplane

√

Compute node cover

√

8 Lenovo ThinkAgile CP Hardware Installation Guide

Power cords

Information about the power cords available for the ThinkAgile CP storage and compute blocks.

Several power cords are available, depending on the country and region where the component is installed.

To view the power cords that are available for the component:

1. Go to:

http://lesc.lenovo.com

2. Click Preconfigured Model or Configure to order.

3. Enter the machine type and model for your storage or compute block to display the configurator page.

4. Click Power ➙ Power Cables to see all line cords.

Notes:

• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To

avoid electrical shock, always use the power cord and plug with a properly grounded outlet.

• Power cords for this product that are used in the United States and Canada are listed by Underwriter's

Laboratories (UL) and certified by the Canadian Standards Association (CSA).

• For units intended to operate at 115 volts: Use a UL-listed and CSA-certified cord set consisting of a

minimum 18 AWG, type SVT or SJT, three-conductor cord, a maximum of 15 feet (4.6 meters) in length

and a parallel blade, grounding-type attachment plug rated 15 amperes, 125 volts.

• For units intended to operate at 230 volts (U.S. use): Use a UL-listed and CSA-certified cord set consisting

of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a maximum of 15 feet (4.6 meters) in

length and a tandem blade, grounding-type attachment plug rated 15 amperes, 250 volts.

• For units intended to operate at 230 volts (outside the U.S.): Use a cord set with a grounding-type

attachment plug. The cord set should have the appropriate safety approvals for the country in which you

install the equipment.

• Power cords for a specific country or region are usually available only in that country or region.

Chapter 1. ThinkAgile CP overview 9

10 Lenovo ThinkAgile CP Hardware Installation Guide

Page is loading ...

Lenovo ThinkAgile CP 4000 Series Installation guide

Brand: Lenovo

Model: ThinkAgile CP 4000 Series

Type: Installation guide

This manual is also suitable for

ThinkAgile CP 6000 Series

Download PDF

report

Lenovo ThinkAgile CP 4000 Series Installation guide

This manual is also suitable for

Lenovo ThinkAgile CP 4000 Series Installation guide

Related papers

Other documents