AKG 753 WH

Bauknecht AKG 753 WH, AKG 751 AV, AKG 751 WH, DSH 1460 BR, DSH 1460 WS Program Chart

  • Hello! I am an AI chatbot trained to assist you with the Bauknecht AKG 753 WH Program Chart. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AKR 500
AKG 751 - AKG 753
5019 100 75050
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 65 cm (electric cookers), 75 cm (gas, gas oil
or coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière: 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen) 75 cm
(kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima desde los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ù(ùü+ù$ùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
)
D
GB
F
NL
E
P
I
GR
2
1
4
3
2
6
A
F
6F
6A
A
F
6A
6F
7
7
8
7
AAF
5019 100 75050
AKR 500
AKG 751 - AKG 753
1
A
A
3
4
4
4
4
5
5
1
1cm
1
2
2
3
3
4
4
5
6
6
5-6
A
7
7
7
2
Montage unter einem Hängeschrank
Under cupboard mounting
Fixation sous un élément mural
Bevestiging onder een
keukenkastje
Fijación bajo un plano suspendido
Fixação em um móvel
Fissaggio sotto un pensile
20!&12&.)!3.
Wandmontage
Wall mounting
Fixation au mur
Bevestiging aan de muur
Fijación a la pared
Fixação em uma parede
Fissaggio al muro
20!&1102 $
A
5019 100 75050
AKR 500
AKG 751 - AKG 753
1.
Control panel.
2.
Grease filters (inside the extractor grille).
3.
Lighting unit.
4.
Pull-out steam deflector.
5.
Steam deflector pivot (inside the extractor.
hood, at the two ends of the steam deflector).
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER-
Fig. 1
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extractor grille (
b, c
).
4.
Remove the device fixing the grease filter (
d
).
5.
Remove the dirty grease filter.
6.
After replacing or cleaning the grease filter
(depends on model), remount in reverse
order, making sure the entire extraction
surface is covered.
REPLACING BULBS -
Fig. 1
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extractor grille (
b, c
).
4.
Remove the burnt-out bulb. Only 40W max
E14 bulbs should be used.
5.
Remount the extractor grille.
MOUNTING OR RENEWING THE
CARBON FILTER -
Fig. 2 - 3
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector (
a
).
3.
Open the extraction grille (
b, c
).
4. Fitting:
position the carbon filter over the
motor protection grille within the reference
marks (
f
) - the reference mark (
g
) on the edge
of the carbon filter should line up with the
arrow on the fan shroud (
h
), and turn
clockwise.
Removing:
turn anti-clockwise.
5.
Remount the extractor grille.
CONTROL PANEL
A.
Selected speed display.
B.
Speed selector.
C.
Light switch.
Fig. 1
1
3
a
b
d
b
4
c
5
2
small amount of steam and fumes
large amount of steam and fumes
medium amount of steam and fumes
O 1 2 3
OI
Fig. 2
C
A
B
AKR 500
AKG 753
AKG 751
h
f
g
Fig. 3
PRODUCT DESCRIPTION
F NL E PGBD GRI
/