Whirlpool AKR 906 IX Program Chart

Whirlpool
Brand
Whirlpool
Model
AKR 906 IX
Category
Cooker hoods
Type
Program Chart
AKR 906
5019 100 75082
INSTALLATIONSANGABEN
Mindestabstand zur Kochfläche: 65 cm (Elektroplatten), 75 cm (Gas-, Öl-,
Kohlekochplatten)
INSTALLATION SHEET
Minimum height above cooker: 65 cm (electric cookers), 75 cm (gas, gas oil
or coal cookers)
FICHE D'INSTALLATION
Distance minimale par rapport à la cuisinière : 65 cm (cuisinière électrique),
75 cm (cuisinière à gaz, mazout ou charbon)
INSTALLATIESCHEMA
Min. afstand van het kooktoestel: 65 cm (elektrische kooktoestellen),
75 cm (kooktoestellen op gas, olie of kolen)
FICHA DE INSTALACIÓN
Distancia mínima de los quemadores: 65 cm (quemadores eléctricos),
75 cm (quemadores a gas, gasóleo o carbón)
FICHA DE INSTALAÇÃO
Distância mínima do fogão: 65 cm. (fogões eléctricos), 75 cm. (fogões a gás,
óleo ou carbono)
SCHEDA INSTALLAZIONE
Distanza minima dai fuochi: 65 cm (fuochi elettrici), 75 cm (fuochi a gas,
gasolio o carbone)
ù(ùü+ù$ùþ
ü$12.)12.1.)2"0120" FP02!"0120" FP0120"
.0! #02!0. #0! #.
D
GB
F
NL
E
P
I
GR
5019 100 75082
AKR 906
1
2
3
4
5
5
6
6
+
6
7
7
7
7
6
11
11
12
13
14
b
b
a
c
d
d+d
8
9
10
10
3
3
3
d
16
16
17
18
18
18
18
19
20
20
20
20
15
F
5019 100 75082
AKR 906
1.
Control panel.
2.
Grease filters.
3.
Lighting unit (halogen bulb).
4.
Telescopic flue.
CLEANING THE GREASE FILTER
Wash the grease filter once a month, or
whenever the grease filter saturation indicator
flashes (Extraction speed indicator
2
).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters:
a
- pull the handles towards the lighting unit,
b
- then downwards.
3.
After washing the metal grease filter,
remount in reverse order ensuring that the
entire extraction surface is covered.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Unscrew the lighting unit.
3.
Remove the burn-out bulb.
Use only halogen bulbs 20W max.
4.
Screw the lighting unit back in place.
FITTING OR RENEWING THE
CARBON FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters (
a
,
b
).
3.
Mount the carbon filter, fixing it with its two
buttons (
c
).
4.
If the carbon filter needs renewing, remove
the old filter and fit a new one.
Change the carbon filter once a year and, in
any event, every time the carbon filter
saturation indicator flashes (Extraction power
indicator
3
).
5.
Refit the grease filters.
Reset filter indicator:
Press the extraction OFF
indicator until LED
2
and/or LED
3
stop flashing.
CONTROL PANEL
1.
Extraction OFF button.
2.
Extraction ON speed increase button -
1
Ö
3
Ö
1...
3.
Extraction speed indicator
1
.
4.
Extraction speed indicator
2
and grease filter
saturation indicator (when flashing).
5.
Extraction speed indicator
3
and carbon filter
saturation indicator (when flashing).
This indicator is normally deactivated: to
activate it, press buttons
2
and
7
simultaneously until the indicator starts
flashing; repeat the operation to deactivate
the signal.
6. Intensive
extraction speed indicator.
7.
Timer intensive speed button: the hood
operates at this speed for 5 minutes and then
returns to the previous settings.
This function can be cancelled by pressing
button
1
or
2
.
8.
Light OFF button.
9.
Light ON button.
4
1
2
2
2
3
3
2
3
1234567 89
a
b
C
C
PRODUCT DESCRIPTION SHEET
F NL E PGBD GRI
  • Page 1 1
  • Page 2 2
  • Page 3 3

Whirlpool AKR 906 IX Program Chart

Whirlpool
Brand
Whirlpool
Model
AKR 906 IX
Category
Cooker hoods
Type
Program Chart
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents