Ops-Core Head-Loc 4-Point Chinstrap Operating instructions

Type
Operating instructions

Ops-Core Head-Loc 4-Point Chinstrap is a revolutionary chinstrap that enhances helmet stability under rotational forces by 3X. Its unique design eliminates loose ends, providing a secure and comfortable fit. The padded leather chin cup and nape pad ensure extra comfort during extended wear, while the one-handed on-the-fly strap adjustment allows for quick and easy customization. Available in tan, green, and black, the Head-Loc 4-Point Chinstrap is compatible with Ops-Core helmets and offers optional LED illumination for left-eye dominant users.

Ops-Core Head-Loc 4-Point Chinstrap is a revolutionary chinstrap that enhances helmet stability under rotational forces by 3X. Its unique design eliminates loose ends, providing a secure and comfortable fit. The padded leather chin cup and nape pad ensure extra comfort during extended wear, while the one-handed on-the-fly strap adjustment allows for quick and easy customization. Available in tan, green, and black, the Head-Loc 4-Point Chinstrap is compatible with Ops-Core helmets and offers optional LED illumination for left-eye dominant users.

06-05-704 REV. B
MADE IN USA
FEATURES
Makes helmet 3X more stable under rotational forces
Sliders allow one-handed on-the-y strap adjustment
Unique strap geometry and design eliminate loose ends
Padded leather chin cup and nape pad for extra comfort
Available in LED (left-eye dominant, buckle on right side)
Available in Tan, Green and Black
H-NAPE
HEAD-LOC
®
4-POINT CHINSTRAP
SIZE
TAN
BLACK
GREEN
COLOR
ONE
SIZE
S/M
L/XL
LED
x4 T-Nuts
x4 Ballistic Screws*
*Longer screws are available for special applications.
INSTALLATION INSTRUCTIONS
PACKAGE CONTENTS
=
(1) Head-Loc
®
H-Nape Chinstrap, and the following ballistic installation hardware:
REMOVE OLD CHINSTRAP
Use a screwdriver or large coin to loosen
the screws and remove your old chinstrap.
INSTALL HEAD-LOC CHINSTRAP
Using a screwdriver or large coin, follow the
diagram on the right to properly install all four
Strap Anchors as shown.
NOTE: BE SURE TO COVER THE ANCHOR HARDWARE
WITH THE HELMET’S COMFORT / SUSPENSION PADS.
LOOSEN HEAD-LOC SLIDERS
Loosen all (4) Head-Loc Sliders by sliding them away from the chin cup.
CONNECT CHINSTRAP BUCKLE
Place the helmet on your head and connect the low prole chinstrap
buckle. This is easiest when placing your index ngers behind each side
of the buckle as shown.
TIGHTEN FRONT HEAD-LOC SLIDERS
Tighten the front straps by pulling the Head-Loc Sliders toward your chin.
This is easiest when holding either side of the slider with your thumb and
middle nger while using your index nger in the top recess.
ADJUST NAPE PAD
Position comfortably (as low as possible) on the back of your head. Pull
Head-Loc Slider with your right hand.
TIGHTEN SIDE STRAPS
Tighten the side straps by pulling the Head-Loc Sliders toward your chin.
This is easiest when holding either side of the slider with your thumb and
middle nger while using your index nger in the top recess.
FITTING INSTRUCTIONS:
Ballistic Screw
Strap AnchorT-Nut
Be sure to cover
anchor hardware
with helmet pads
OPS-CORE, INC.
Marine Industrial Park
12 Channel Street
Boston, MA 02210
Tel: 617.670.3547
Fax: 617.670.3581
Or visit our website
at www.ops-core.com
ACH helmet shown in the diagram. Shell and suspension may vary.
  • Page 1 1
  • Page 2 2

Ops-Core Head-Loc 4-Point Chinstrap Operating instructions

Type
Operating instructions

Ops-Core Head-Loc 4-Point Chinstrap is a revolutionary chinstrap that enhances helmet stability under rotational forces by 3X. Its unique design eliminates loose ends, providing a secure and comfortable fit. The padded leather chin cup and nape pad ensure extra comfort during extended wear, while the one-handed on-the-fly strap adjustment allows for quick and easy customization. Available in tan, green, and black, the Head-Loc 4-Point Chinstrap is compatible with Ops-Core helmets and offers optional LED illumination for left-eye dominant users.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI