aspenhome I540-6050 Assembly Instructions
- Type
- Assembly Instructions
Page 1/2
ITEM NO: I540-6050 Extendable Dining Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
Table Top
2 Leaf
3
1 PC
1 PC
1 PC
Leg 4 PCS
8 PCS
8 PCS
8 PCS
Option 1
Option 2
Adjust the leveler
when necessary
Leveler on legs
Leaf
Bolt Ø5/16" x 2-1/4"
Allen Wrench 4mm
02-17-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 1: Lay the table top face down on a soft surface. Attach the legs to table top by using
8 bolts(A), lock washers(B) and flat washers(C). Use the allen wrench(D) provided to tighten
all the bolts. Turn the assembled table to the upright position.
STEP 2: Make the table locks under the table top at the OFF position as shown below. And pull the
table top to both sides out completely.
Table Lock
OFF
POSITION
ON
POSITION
For OPTION 1:
For OPTION 2:
STEP 3: Put the leaf in and push the table top until the table top fully closed. Make the table locks
at the ON position.
ITEM NO: I540-6050 Extendable Dining Table
Pin
Table Lock
Table Leveler
Leg Leg
Table Top
A
B
C
05-16-2023
-
1
-
2
aspenhome I540-6050 Assembly Instructions
- Type
- Assembly Instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
aspenhome I248-6050 Assembly Instructions
-
-
-
-
-
-
-
-
-
